![[Symbiote Spiderman] This custom is very basic, I couldn't bare to look at the original paintjob anymore, so I repainted the costume testors black an the spider skull white. I made the eyes a little larger McFarlane style, as for the webbing, its just jewelry wire dry brushed white- comments welcomed, God Bless](userimages/customs/35000/34783-1.jpg) Symbiote Spiderman Spider-Manby TommyGunn79This custom is very basic, I couldn't bare to look at the original paintjob anymore, so I repainted the costume testors black an the spider skull whit...2 comments | ![[Apocalypse] Used a DCU Mongul base, all black base coat with testors, then used Tamiya Chrome silver where needed, then applied several coats of Tamiya clear blue. The head was another cast from Camco Kid, mixed up some gray paint then made the gray paint a little darker for a quick dry brush, cape I added was from a ML black panther and tubes was from a build a figure Sentinel- comments welcomed and appretiated, god Bless](userimages/customs/35000/34782-1.jpg) Apocalypse Marvel Legendsby TommyGunn79Used a DCU Mongul base, all black base coat with testors, then used Tamiya Chrome silver where needed, then applied several coats of Tamiya clear blue...5 comments |
![[Captain America] I gave figure customizing a shot with 2 broken fingers on this one....but here it goes, marvel legends Cyclops for a base and a casted head from Camco Kid, enchanted blue, skull white and guards red for paint. A sculpted star and a 8 inch captain figures shield, comments welcomed and appretiated, God bless](userimages/customs/35000/34610-1.jpg) Captain America Marvel Legendsby TommyGunn79I gave figure customizing a shot with 2 broken fingers on this one....but here it goes, marvel legends Cyclops for a base and a casted head from Camco...3 comments | ![[Phantom Rider] I have always been a fan of the Phantom Rider character, but in appearance he reminded me of a primative Moon Knight, so I decided to make him in the Billie the Kid era costume. I used a Jonah Hex figure for the base and added a Moon Knight head, paint was a black base coat followed by a white dry brush, comments welcomed and appretiated, God Bless](userimages/customs/35000/34608-1.jpg) Phantom Rider Marvelby TommyGunn79I have always been a fan of the Phantom Rider character, but in appearance he reminded me of a primative Moon Knight, so I decided to make him in the ...9 comments |
![[Carnage] I thought this figure was really cool other than the paint job and accessories, I simply painted him opposite of what the factory did (black where the red was and red where the black was) for the tendrils I used bread ties and plastic from a clam-shell package then dipped in plasti-dip and added a base, comments welcomed and appretiated, God Bless](userimages/customs/34500/34279-1.jpg) Carnage Spider-Manby TommyGunn79I thought this figure was really cool other than the paint job and accessories, I simply painted him opposite of what the factory did (black where the...1 comments | ![[Ghost Rider] I wasn't planning on doing a ghost rider but when i saw the base figure a light went off.....I yanked off Arnold's head, gave the base an all black coat of paint followed by a dark grey dry-brush, I really wanted the flames on his head to show on his clothes so I dry-brushed Orange, red....then yellow where needed, for the head I used a McFarlane headless horseman skull, I gave that a black base coat then mixed bone white, black and a little white. For the flames I used a hot glue gun and let gravity pull them together in a point (sounds easier than it was) red base coat, orange and yellow separately dry-brushed. Chain is a basic craft store pick up, comments welcomed and appretiated, God Bless](userimages/customs/34500/34277-1.jpg) Ghost Rider Marvel Legendsby TommyGunn79I wasn't planning on doing a ghost rider but when i saw the base figure a light went off.....I yanked off Arnold's head, gave the base an all black co...9 comments |
![[Namor the Sub Mariner] Used a ML Angel as a base figure and shaved off his wing clips,as usual 5 different paints for his skin tone, head consist of a DCU Black Adam, a small sea shell for his belt buckle and trident and wings on his feet wer from a marvel figure factory spiderman. Trident made from a barbeque scewer, bread ties and plasti-dip, comments welcomed and appretiated, god bless](userimages/customs/34500/34145-1.jpg) Namor the Sub Mariner Marvel Legendsby TommyGunn79Used a ML Angel as a base figure and shaved off his wing clips,as usual 5 different paints for his skin tone, head consist of a DCU Black Adam, a smal...7 comments | ![[Storm Shadow 80s Version] I appreciated all the many Storm Shadows, but the 80s retro look just reminds me of my childhood, started with a ML Sentry and stripped of all his extras, 5 shades of paint for his skin tones including his face, the head was a ML Moon Knight which I transformed into Storms ninja hood, 2 coats of testors white paint, tattoo and cobra symbol were painted using a reaper master red, shoulder strap was a rubber band and sash was random fodder. Belt star sculpted using aves. And ninja toe was just a small wedge cut out each foot using an exacto knife,,,comments welcomed god bless](userimages/customs/34500/34130-1.jpg) Storm Shadow 80s Version Marvel Legendsby TommyGunn79I appreciated all the many Storm Shadows, but the 80s retro look just reminds me of my childhood, started with a ML Sentry and stripped of all his ext...8 comments |
![[Batman Fear Toxin (Batman Begins)] After watching Batman Begins several times and admiring the Bat-demon, I went to work. I started with a Batman base figure that I recently got at Toys r us painted the entire figure black, I used a marvel legends Bullseye variant head and sculpted it. Little Dremel work and a dark gray dry brush, red teeth and finished, comments welcomed and appretiated...god bless](userimages/customs/34500/34129-1.jpg) Batman Fear Toxin (Batman Begins) D.C. Universeby TommyGunn79After watching Batman Begins several times and admiring the Bat-demon, I went to work. I started with a Batman base figure that I recently got at Toys...6 comments | ![[Crossbones] Crossbones was made using a Street Fighter Guile base figure and a ML Crossbones cast head, very basic custom, I used 5 different flesh paints for the skin tone, black testors paint for his shirt, pants boots and gloves, I then lightly dry brushed a dark gray over that. Attached the head and applied paint. I used a brighter flashed picture just to show the dry brushing and skin tones comments welcomed and appreciated, God Bless](userimages/customs/34000/33903-1.jpg) Crossbones Marvel Legendsby TommyGunn79Crossbones was made using a Street Fighter Guile base figure and a ML Crossbones cast head, very basic custom, I used 5 different flesh paints for the...8 comments |
![[Black Panther Original] I wanted to create a Black Panther with that 70s flare, so I had this beat up Moon Knight that was cut off at the shoulders (no neck). So the first thing I did was sculpted him a neck using aves, while that cured I casted myself another Moon Knight head and also sculpted Panthers ears onto it....thereafter a coat of Testors black and a reflective yellow paint for the eyes: comments welcomed](userimages/customs/33500/33470-1.jpg) Black Panther Original Marvel Legendsby TommyGunn79I wanted to create a Black Panther with that 70s flare, so I had this beat up Moon Knight that was cut off at the shoulders (no neck). So the first th...1 comments | ![[Wonderman (Phasing)] I wanted to make a Wonderman in his phasing stage, I took the ML Wonderman and Ionic Wonderman and mutated them both, first off I repainted his black and red and gave him shoulder sleeves, next I put the Ionic forearms and hands on the figure then dry-brushed a little sky blue paint on his hands and attached the Ionic head...both heads are pictured in the photos so you guys can decide which is better: comments welcomed](userimages/customs/33500/33468-1.jpg) Wonderman (Phasing) Marvel Legendsby TommyGunn79I wanted to make a Wonderman in his phasing stage, I took the ML Wonderman and Ionic Wonderman and mutated them both, first off I repainted his black ...2 comments |
![[Destroyer] 360 turnaround for the Thor series Destroyer, first thing I did was hollow out his head so I could install an LED bulb to give the glowing eyes, then removed his left arm to somehow get a blue LED to his fist to get the flames to also light up. For the flames I used fodder from a marvel figure factory Nightcrawler.paint job was very basic black Testors paint for a base and Tamiya titanium silver was then drybrushed on,,comments welcomed](userimages/customs/33500/33399-1.jpg) Destroyer Marvelby TommyGunn79360 turnaround for the Thor series Destroyer, first thing I did was hollow out his head so I could install an LED bulb to give the glowing eyes, then ...6 comments | ![[Silver Surfer] This Silver Surfer was made using a ML Quicksilver base, I really need a base figure who had bendy ankles so he could pose right on the surf board and Quicky was nominated, for his head I used a ML Professor X and just sanded down the eyebrows. The surf board was just tupperware plastic cut to shape( a real big pain, just buy a Surfer board its easier)....and finally paint job is Tamiya silver Chrome. Comments welcomed](userimages/customs/33500/33398-1.jpg) Silver Surfer Marvel Legendsby TommyGunn79This Silver Surfer was made using a ML Quicksilver base, I really need a base figure who had bendy ankles so he could pose right on the surf board and...6 comments |
![[Xorn Kung Fu Master] When I think of Xorn, I think of him in his Kung Fu suit, so I made one to satisfy a couple friends. First I started with a street fighter Gen figure and painted him sky blue then a white dry brush. As far as the head, I just dremel down Gens head so Xorns helmet would fit, as far as the buttons on the suit, its just plastic twist ties painted silver then clear yellow. Comments welcomed](userimages/customs/33500/33368-1.jpg) Xorn Kung Fu Master Marvel Legendsby TommyGunn79When I think of Xorn, I think of him in his Kung Fu suit, so I made one to satisfy a couple friends. First I started with a street fighter Gen figure ...6 comments | ![[Darth Maul] Wanted to do a ML scale Darth Maul, took a Bullseye base and removed all the extras, then added ML Red Skull face off boots, for the head and skirt I used an epic force Darth Maul and was repainted. The paint base was testors black and I used Reaper Masters "Carnage Red" paint suggested to me by XYSMA (thanks much better paint) and finally the tattoo details and a good pose. Comments welcomed](userimages/customs/33500/33352-1.jpg) Darth Maul Marvel Legendsby TommyGunn79Wanted to do a ML scale Darth Maul, took a Bullseye base and removed all the extras, then added ML Red Skull face off boots, for the head and skirt I ...21 comments |
![[Red Skull] I used a Nick Fury double pack base figure and a Red Skull fO head. Basically I just removed the Fury head and painted a black basecoat, for the head a black base then red dry brushing, and finally the undesirable uniform logos, which I'd like to apologize to anyone if they are offended by them, sorry, I'm just trying to be true to the character. Comments welcomed](userimages/customs/33500/33003-1.jpg) Red Skull Marvel Legendsby TommyGunn79I used a Nick Fury double pack base figure and a Red Skull fO head. Basically I just removed the Fury head and painted a black basecoat, for the head...1 comments | ![[Mysterio: Amazing Spiderman #13 Tribute] Using an extra Moon Knight I had laying around, I decided making this figure, removed moons head, forearms and hands an added the arms and hands from the SM classics Mysterio. I wanted to keep Mysterio's look classic but wanted to give him a tiny bit of new flair. First a black base coat of black, then a coat of Snot green, I then took the cape from SM classics Mysty and painted it purple and attached to the figure. For the head I used the smallest ping pong head you can buy and glued and apoxied it, overall I thnk this figure came out ok other than the glossy purple paint which unfortunately I couldn't find a decent flat purple paint anywhere(any suggestions would be great). And finally I didn't add the eyes on his chest simply for a different look and also my own demons which for some reason always peeved me lol. but fire away with the comments cuz they are appreciated](userimages/customs/33000/32981-1.jpg) Mysterio: Amazing Spiderman #13 Tribute Marvel Legendsby TommyGunn79Using an extra Moon Knight I had laying around, I decided making this figure, removed moons head, forearms and hands an added the arms and hands from ...1 comments |
![[Vision] After seeing they made a Dr. Manhattan figure in which he is displayed levitating.what I really saw was Vision, I wanted him to have an Android effect so I went with a metallic paint job. This custom really wasn't that difficult to achieve, started by connecting the levitating legs rather than the standing legs, game him a silver base coat then used clear yellow and green paint accordingly to accomplish the metallic paint job, red face and white eyes (all paint was Tamiya colors) as far as the cape, it was from a ML vision and was not painted metallic because I did not want it to blend with the figure, and also I figured vision is the Android not his cape lol. Comments welcomed](userimages/customs/33000/32980-1.jpg) Vision Marvel Legendsby TommyGunn79After seeing they made a Dr. Manhattan figure in which he is displayed levitating.what I really saw was Vision, I wanted him to have an Android effect...2 comments | ![[Deadpool W Diorama] Used a f o punished for the base, a Moon Knight head which I sculpted to my likings, painted him all black with a base coat and dry brushed it with Testors Insignia red paint, then address costume details. Weapons were from random figures, and gun effects such as flames were carved from a wooden dowel then painted. Figure base was from the MS Deadpool and the figure was giving the effect of jumping by a clear plastic cocktail stirrer which I then heated up and bent, and just connected to the base comments welcomed](userimages/customs/33000/32950-1.jpg) Deadpool W Diorama Marvel Legendsby TommyGunn79Used a f o punished for the base, a Moon Knight head which I sculpted to my likings, painted him all black with a base coat and dry brushed it with Te...2 comments |
![[Moon Knight] ML Black Panther base, Moon Knight head and cape.....this is a very basic but effective custom, first I filed down Panthers claws and removed his head, I then added the moon knight head and painted the figure all black for a base coat. Next I sculpted a crescent moon on his chest, then just trimmed the point off the hood and dry brushed the figure white......finished! Tell me what ya think](userimages/customs/33000/32949-1.jpg) Moon Knight Marvel Legendsby TommyGunn79ML Black Panther base, Moon Knight head and cape.....this is a very basic but effective custom, first I filed down Panthers claws and removed his hea...4 comments | ![[Deadpool "12 Icon] This is one of my two Deadpools, yea, sorry....the base figure for this is a Marvel Icon "12 Daredevil yellow version which made the paint job a little more time consuming, first had to sand down the DD on his chest, gave him a black base coat then dry brushed using Testors Insignia Red paint, i decided to use the existing Daredevil head and just sculpted over it.....way harder than i expected! also beltbuckle is sculpted.i used lobster claw rubber bands for his neck,wrist and ankle cuffs. weapons consits of random swords and guns. the small deadpool is not one of my better customs,but only used in the photos for size comparison. Comments welcomed](userimages/customs/33000/32849-1.jpg) Deadpool "12 Icon Marvel Iconby TommyGunn79This is one of my two Deadpools, yea, sorry....the base figure for this is a Marvel Icon "12 Daredevil yellow version which made the paint job a ...1 comments |
![[Bane] Mac gargan Venom base figure, first i painted it with a black base coat, then a light red coat, then dry brushed a flesh tone, i wanted to get the effect of venom running thru his veins so i painted them a lime green.the figures head is a spiderman classics Juggernaut minus the helmet in which i sculpted, the venom accessories are random peices from marvel figure factory figures. materials used: base figure,seperate head, Testors model masters paint, Aves apoxy sculpt, figure factory fodder and a Dremmel. comments welcome and appretiated](userimages/customs/33000/32848-1.jpg) Bane Marvel Legendsby TommyGunn79Mac gargan Venom base figure, first i painted it with a black base coat, then a light red coat, then dry brushed a flesh tone, i wanted to get the eff...5 comments | ![[Wolverine Retro Colors] used a Marvel Legends Wolverine, i have always liked the newer style costume,but the old school colors(bright yellow and light blue) so i decided to give Wolverine a make-over. like always, i gave him a base coat of white, then used the yellow paint and morning blue......after the paint i was still not satisfied so i made Wolvie a little more dangerous of a toy to play with by giving him steel claws, i used the smooth non bumpy side of a bobby pin.....i can not stress enough that as cool as this accessory is, it tends to be a little dangerous, first you want to get a good locking pair of vice grips, then you want to use a dremmel to sand off all the paint until you get down to bare metal,once that is done you want to grind down the part your going to use as the tip to an angle. once you have all your claws prepped, the next step is to heat the base of each claw with a torch lighter and while still hot, let each claw melt into the figures hand, let cool, then paint each hand.....enjoy,](userimages/customs/33000/32837-1.jpg) Wolverine Retro Colors Marvel Legendsby TommyGunn79used a Marvel Legends Wolverine, i have always liked the newer style costume,but the old school colors(bright yellow and light blue) so i decided to g...3 comments |
![[Venom] Used a scorpion sting Venom,a modified Sinister Six Venom head, also filled in the giant hole in his back. paint job consists of a black base coat followed by three shades of blue in which i dry brushed on.......and finished! (materials used) base figure,additional head,Testors Model Masters paint, Aves apoxy sculpt and a Dremel](userimages/customs/33000/32835-1.jpg) Venom Marvel Legendsby TommyGunn79Used a scorpion sting Venom,a modified Sinister Six Venom head, also filled in the giant hole in his back. paint job consists of a black base coat fol...8 comments | |
|