![[Fixer] Continuing to complete my thunderbolts roster here's fixer.
He's made from a falcon body, havok arms with the shoulder mod and a dr. strange. I sculpted the left side of his armor, the gauntlets and the eye piece. The right side of his armor came from an iron man figure. Shaved his head down and sculpted over that also. The piping was done with fine wire,the belt came from mr sinister's cape and the rest was just a paint job.
Hope you guys like him
Constructive criticism is welcome!](userimages/customs/46000/45949-1.jpg) Fixer Marvel Legendsby baby_customsContinuing to complete my thunderbolts roster here's fixer.
He's made from a falcon body, havok arms with the shoulder mod and a dr. strange. I sculp...14 comments | ![[Ghost V3] Well it's obvious that I like this character and I wanted to give it another shot, but this time in his costume that he wore when he was on norman osborn's thunderbolts.
He's made from a judge death with the boots from a long shot. Sculpted the head, extra clothing, any necessary straps and the armour pads. His straps that hang from his body are pieces of mr. sinister's cape and the pouches were fodder. Hope you guys like him.
Constructive criticism is welcome!](userimages/customs/46000/45651-1.jpg) Ghost V3 Marvel Legendsby baby_customsWell it's obvious that I like this character and I wanted to give it another shot, but this time in his costume that he wore when he was on norman osb...16 comments |
![[Toad] Just before Christmas and the New Year starts I wanted to submit another custom I've been working on. I decided to create toad in his janitor look in the wolverine and the x-men titles. He's been on my bucket list of customs for so long but I always put him off.
He's made from a series 7 weapon x, legs from a blade figure and the head is nightcrawlers. Sculpted the torso, belt, head, sleeves, and thighs. As an accessory I made his mop/broom which he was seen using in his introduction as the janitor. Hope you guys like him and happy holidays!
Conrtructive criticism is welcome](userimages/customs/45500/45445-1.jpg) Toad Marvel Legendsby baby_customsJust before Christmas and the New Year starts I wanted to submit another custom I've been working on. I decided to create toad in his janitor look in ...9 comments | ![[Scarlet Witch] Hey guys, been a while.
Just wanted to put something out there before christmas comes, as this time of year is a busy time.
She's made using a spiderwoman base with a two pack elektra head. The cape is made mainly from paper mache (props to Craig Warrack) and all other necessary details were sculpted on.
Hope you guys like her!
Constructive criticism is welcome.](userimages/customs/45500/45261-1.jpg) Scarlet Witch Marvel Legendsby baby_customsHey guys, been a while.
Just wanted to put something out there before christmas comes, as this time of year is a busy time.
She's made using a spider...21 comments |
![[Apocalypse AOA] Had this guy planned for the longest time now, just never got around to making him.
I used a maestro figure as the base and nothing else. I extended his torso and shins and resculpted on top of them. Sculpted the entire torso section, dremeld down his face and completely resculpted it. I snatched the cape from dr doom and sculpted it onto the figure. Sculpted the gauntlets, boots, neck brace and shoulder pads as well. Afterwards it was finally time to paint.
A big thanks to NeCrollector for guiding me in painting this guy, you really helped alot brother and it means alot!
He was painted with citadel paints, and sealed. Hope you all like him
Constructive criticism is welcome!](userimages/customs/44000/43865-1.jpg) Apocalypse AOA Marvel Legendsby baby_customsHad this guy planned for the longest time now, just never got around to making him.
I used a maestro figure as the base and nothing else. I extended...25 comments | ![[Nightcrawler] So I've been interested in rounding up my x-men in their modern costumes lately and I wanted to update my nightcrawler. So here's his AXM costume.
I used a xmc archangel and transplanted nightcrawlers forearms, legs and tail onto the figure. I was going to use the head from the ml 9 nightcrawler but it was too big and gargoyle like, so I decided to use longshots. I sculpted the hair and added the ears, I also did the shoulder mod to make his shoulders less broad. He was painted with citadel paints. Hope you guys like him!
Constructive criticism is welcome!](userimages/customs/43500/43197-1.jpg) Nightcrawler Marvel Legendsby baby_customsSo I've been interested in rounding up my x-men in their modern costumes lately and I wanted to update my nightcrawler. So here's his AXM costume.
I ...6 comments |
![[Havok] I had a spare bullseye body around and I wanted to attempt a character that I have very little knowledge on, so I decided to turn him into havok. His modern uniform of course.
I used a longshot head, archangel forearms, and wonderman boots. The belt was a combination of xmc beasts 'x' logo and longshots bag strap. I sculpted the headpiece and hair and then it was a straight up repaint. How to achieve his glowing effect on his suit was a head scratcher but with a few experiments I achieved a look that satisfies me enough. The pictures don't do the effect justice however. He was painted with citadel paints. Hope you guys like him!
Constructive criticism welcome!](userimages/customs/43500/43106-1.jpg) Havok Marvel Legendsby baby_customsI had a spare bullseye body around and I wanted to attempt a character that I have very little knowledge on, so I decided to turn him into havok. His ...6 comments | ![[Piledriver] As soon as I saw whiskey's mod for piledriver I couldn't resist trying it myself. I wasn't all too happy with the fist that came with him as well so I thought I might give it a go.
I swapped out his forearms with savage dragons, sculpted the sleeves, boot cuffs, and collar around his neck to make those areas more apparent. Glued down his belt because it was annoying how it was freely movable. Gave him a quick repaint with citadel paints and he was done. Hope you guys like him!
Constructive criticism is welcome!](userimages/customs/43000/42953-1.jpg) Piledriver Marvel Legendsby baby_customsAs soon as I saw whiskey's mod for piledriver I couldn't resist trying it myself. I wasn't all too happy with the fist that came with him as well so I...12 comments |
![[Beast-Modern Costume] Hey there guys! I'm currently working on building up my modern x-men team, and I thought it would be fun to try beast first! He's the type of character that I haven't really dove into making, but he was a real fun project to do.
He's made from an xmc stealth beast, I sculpted extra fur on his face and arms to give him a more beefy look. Sculpted the belt, harness and goggles, dremeled the shin guards and resculpted fur over the top of the area. The pouches and chest strap were fodder and the gun came from forge. Hope you guys like him! More to come.
Constructive criticism is welcome!](userimages/customs/43000/42784-1.jpg) Beast-Modern Costume Marvel Legendsby baby_customsHey there guys! I'm currently working on building up my modern x-men team, and I thought it would be fun to try beast first! He's the type of characte...7 comments | ![[Sentry] Since the new marvel legends never see the light of day here in Australia, I knew that I'd never get my hands on that new sentry coming out. So being impatient, I decided to have a go at the character.
He was made using a TNA wrestling figure, with doc samson's head, sentry's cape and a random figures hair. I sculpted the cape onto the body and sculpted the boots, gloves and belt. He was a fun guy to make and I'm happy that my dark avengers are almost complete. Hope you guys like him!
Constructive criticism is welcome!](userimages/customs/43000/42570-1.jpg) Sentry Marvel Legendsby baby_customsSince the new marvel legends never see the light of day here in Australia, I knew that I'd never get my hands on that new sentry coming out. So being ...9 comments |
![[Strong Guy] I wanted update my previous strong guy, so I decided to go with a monkeyman base. But then I thought the modern costume would be too simple for this size of a figure so I decided to go for the x-factor costume since the colours and design were more interesting than the modern look.
This guy was made from a monkeyman and he took alot of shaving, dremeling and sanding.. The arms were so time consuming, that I almost got to the point where I was gonna drop the whole project. But i got there in the end. His boots came from a juggernaut figure. His entire chest was resculpted, along with the yellow bands that you see throughout the figure. His head was a marvel select hulk, which I sculpted over to give him more of a smirk. He was painted with citadel paints. Had fun making this guy, it was a different experience. Hope you guys like him!
Constructive criticism is welcome!](userimages/customs/43000/42542-1.jpg) Strong Guy Marvel Legendsby baby_customsI wanted update my previous strong guy, so I decided to go with a monkeyman base. But then I thought the modern costume would be too simple for this s...24 comments | ![[Mr. Hyde] He was made using a lcbh marv figure. I resculpted his torso (although u cant't see a majority of the details), the hair, and the cane.I also resituated the head so it sits higher and so he wasnt hunching. The hat was fodder and the rest was just a paint job. My thunderbolts are 50% complete so expect more! He was painted with citadel paints. Hope you guys like him!
As always, constructive criticism is welcome!](userimages/customs/42000/41652-1.jpg) Mr. Hyde Marvel Legendsby baby_customsHe was made using a lcbh marv figure. I resculpted his torso (although u cant't see a majority of the details), the hair, and the cane.I also resituat...11 comments |
![[Crossbones] This guy was made using a bishop base with a resculpted torso and head. Additional things such as the armor and vest were sculpted and the pouches were fodder. The guns were from various figures. He was painted with citadel paints, Hope you guys like him,
Constructive criticism is welcome!](userimages/customs/42000/41502-1.jpg) Crossbones Marvel Legendsby baby_customsThis guy was made using a bishop base with a resculpted torso and head. Additional things such as the armor and vest were sculpted and the pouches wer...6 comments | ![[Ms. Marvel (Moonstone)] just a simple repaint with a sculpted mask and spiderwoman hair. Hope you huys like her!
Constructive criticism is welcome!](userimages/customs/41500/41276-1.jpg) Ms. Marvel (Moonstone) |
![[Galius Zed] To make this guy, I resculpted his face, sculpted his entire body, donated limbs from iron fist, and sculpted the boot cuffs and gloves. I placed a magnet within the right forearm of the figure so that it could be replaced with a construct. He was painted with citadel paints. I really enjoyed making this guy so I hope you guys like him!
As always, constructive criticism is welcome!](userimages/customs/41000/40662-1.jpg) Galius Zed Green Lanternby baby_customsTo make this guy, I resculpted his face, sculpted his entire body, donated limbs from iron fist, and sculpted the boot cuffs and gloves. I placed a ma...15 comments | ![[Iron Patriot] Sorry I been slacking on the customs lately, been busy with alot of things but hopefully I can deliver customs on a regular basis from now on. So anyway, Iron Patriot was made using an extremis iron man and I found that the suit fit the character more than the movie iron man suits. He was a simple repaint with some minor resculpting on the chest. And for a bonus, I sculpted a norman osborn head from scratch. The pictures don't do the norman head justice but I'm fairly satisfied with how it turned out. I clear coated the whole figure a gloss coat afterwards to give it that armor feel and then voila! Painted with citadel paints and sprayed with a gloss varnish. Hope you guys like my take on this character!
Constructive criticism is welcome!](userimages/customs/40500/40232-1.jpg) Iron Patriot Marvel Legendsby baby_customsSorry I been slacking on the customs lately, been busy with alot of things but hopefully I can deliver customs on a regular basis from now on. So anyw...10 comments |
![[Starscream] Since the original first edition releases of the transformers prime figures were never seen in Australian stores, I decided to use the entertainment pack starscream since it was my closest bet of getting an accurate tfp starscream figure. Simple repaint but this guy was a pain with pain chipping so its not perfect. Oh i also updated my soundwave custom to darken his colours. Painted with citadel paints.
Hope you guys like hime!
Constructive criticism is welcome!](userimages/customs/39500/39083-1.jpg) Starscream Transformersby baby_customsSince the original first edition releases of the transformers prime figures were never seen in Australian stores, I decided to use the entertainment p...8 comments | ![[Soundwave] Hello! Sorry I havent submitted a custom in a while, but hopefully I can make it up with this one.
I wanted a tfp soundwave that was accurate in both height, and colour scheme. So I cut his shin in half, and a put a clear rod between the area where I cut to have a base to sculpt around. So I sculpted around it and then sanded it. From then on it was a simple repaint. Don't mind the way I transformed his wings, I just believe if he has a longer front his wings should be longer. He was painted with citadel paints. This was my first attempt at kitbshing a transformer and painting one, hope you all like him!
Constructive criticism is welcome!](userimages/customs/38500/38475-1.jpg) Soundwave Transformersby baby_customsHello! Sorry I havent submitted a custom in a while, but hopefully I can make it up with this one.
I wanted a tfp soundwave that was accurate in both ...4 comments |
![[Thanos] It's bee ages since i've submitted a custom, but i'm back now and here to show u another favourite custom of mine.
Here's Thanos in his Annihilation costume, another custom inspired by warrack. He's made using a galactus series hulk figure. I shaved off his hair and resculpted a majority of his face. I sculpted his scarf, shoulder pads, bandages, pouches, belt, feet, and any other necessary details. He was painted with citadel paints. I hope you guys like him I had a great time making this guy!
Constructive criticism is welcome!](userimages/customs/37500/37483-1.jpg) Thanos Marvel Legendsby baby_customsIt's bee ages since i've submitted a custom, but i'm back now and here to show u another favourite custom of mine.
Here's Thanos in his Annihilation c...11 comments | ![[Hogun the Grim] I sculpted his scarf, belt, and his mace was made from scratch. His face is made from a HML Ultimate Iron man and then sculpted over. His horns are from Loki. I sculpted his skirt pieces individually and then attached them with rubber bands. He was painted with citadel paints. More warriors three are to come..
Constructive criticism is welcome!](userimages/customs/36500/36370-1.jpg) Hogun the Grim Marvel Legendsby baby_customsI sculpted his scarf, belt, and his mace was made from scratch. His face is made from a HML Ultimate Iron man and then sculpted over. His horns are fr...9 comments |
![[Ghost V2] I wanted to improve on my first attempt at ghost, and when I saw warrack's it inspired me to make another one.
I sculpted his face, elbow pads, shoulder pads, his belt straps, all necessary details and smoothened out his forearms so they look more like gloves. His head is alternate head is made from a loki and it is removable by magnets. For his lights I used slices of gambit's staff and his boots are from an X3 jean grey. He was painted with citadel paints. Hope you all like him!
Constructive criticism is welcome!](userimages/customs/36500/36108-1.jpg) Ghost V2 Marvel Legendsby baby_customsI wanted to improve on my first attempt at ghost, and when I saw warrack's it inspired me to make another one.
I sculpted his face, elbow pads, should...13 comments | ![[Taskmaster] A quick and easy custom that i based off of whiskeyrangoscustomshop.
I re-sculpted his face similar to his modern appearances, modified his cape and then gave him a full repaint.
Hope you all like him!
Constructive criticism is welcome!](userimages/customs/36500/36007-1.jpg) Taskmaster Marvel Legendsby baby_customsA quick and easy custom that i based off of whiskeyrangoscustomshop.
I re-sculpted his face similar to his modern appearances, modified his cape and t...4 comments |
![[Annihilus] This Annihilus is based on Craig Warrack's custom with a few differences.
Instead of sheelob parts i recycled pieces from the BAF Annihilus.The head, wings,shoulder pads, hands and hind legs are from the original Baf with the other necessary details being sculpted onto the blackheart base. I re-sculpted the face to try and replicate warrack's and i also extended the fingers using toothpicks and then sculpted around. I sculpted his head piece and made his gold antennas from wire and glue.I attached his wings by sculpting in bionicle joints. I sculpted his knee pads and the loin cloth is from an X3 jean grey figure. I cut Annihilus' thigh and ankle and cut off blackhearts shin. This is so I could attach the two and make his appearance more insect like in Annihilation. I had a great time making this custom and personally i think its my best.
He was painted with citadel and tamiya paints. Hope you all like him.
Constructive criticism is welcome!](userimages/customs/36000/35864-1.jpg) Annihilus Marvel Legendsby baby_customsThis Annihilus is based on Craig Warrack's custom with a few differences.
Instead of sheelob parts i recycled pieces from the BAF Annihilus.The head, ...11 comments | ![[Absorbing Man] Just a simple repaint, nothing more to say.
Constructive criticism is welcome!](userimages/customs/35500/35466-1.jpg) Absorbing Man |
![[Rockslide] A simple custom, scultpted extra rocks in the necessary places, then repainted him with citadel paints.
Constructive criticism is welcome!](userimages/customs/35500/35465-1.jpg) Rockslide Marvel Legendsby baby_customsA simple custom, scultpted extra rocks in the necessary places, then repainted him with citadel paints.
Constructive criticism is welcome!...5 comments | ![[Colossus (Juggernaut)] This interpretation of Colossus took me longer than i expected, but i'm fairly satisfied with the outcome. I guess this is my Christmas present to myself..lol
Anyway, when i saw cbrocustoms and dbocustoms take on this character, i was inspired to make one of my own, plus i hadn't had any plans for my abomination figure. Lots and lots of sculpting with this guy, and this was the first time i cast anything. I'm pretty happy with how the helmet turned out and its fairly durable so i wont be expecting any cracking or breaking. Re-sculpted his head, main body, legs, feet, and those gauntlet things on his arms. A problem that I came across while making this custom were the joints on his legs. They were extremely tight and the paint kept rubbing off, so I tried dremeling it but it didn't help. Finally I came to a decision of sculpting over he joint and then my problem was finally solved. Dremeled the warts on his arms, and his feet greatly, to prevent the clown shoe look that i had with my pr](userimages/customs/35500/35322-1.jpg) Colossus (Juggernaut) Marvel Legendsby baby_customsThis interpretation of Colossus took me longer than i expected, but i'm fairly satisfied with the outcome. I guess this is my Christmas present to mys...2 comments |
![[Strong Guy] Thanks for all of the feedback on my ghost custom and here is X factors strong guy.
Made from a Fin Fang Foom series savage hulk, sculpted the facial features, glove cuffs, belt and boots. Painted with citadel paints.
Constructive criticism is welcome!(:](userimages/customs/35500/35187-1.jpg) Strong Guy Marvel Legendsby baby_customsThanks for all of the feedback on my ghost custom and here is X factors strong guy.
Made from a Fin Fang Foom series savage hulk, sculpted the facial ...7 comments | ![[Ghost] Sculpted the head and armor, pouches were fodder and painted with citadel paints.](userimages/customs/35500/35155-1.jpg) Ghost |
|