![[Beast 90's Jim Lee Style] I was so disappointed with the MU Beast that came out, and I didn't want to pay so much for the SHS Beast so I made my own. Based off of the 90's comics and the X-Men cartoon I realized that Beast should of been a lot bigger. Recipie: Head- MU Skaar head w/ sculpt Upper & Lower Toros- MU Thanos Upper Arms- MU Thanos Lower Arms- Avengers 3Pk 1st App. Hulk Hands- Skaar hands w/ sculpted claws and articulated hands to open and close Belt- Modified Thanos skirt piece Legs- 1st App. Hulk Feet- 1st App. Hulk w/ sculpted claws w/ added articulation As far as his fur goes, I used a dremel tool to give it that fur like texture all over his body. Applied a couple of washes of black and a customized blue, sealed it and was done.](userimages/customs/47500/47278-1.jpg) Beast 90's Jim Lee Style Marvel Universeby WM23-CUSTOMSI was so disappointed with the MU Beast that came out, and I didn't want to pay so much for the SHS Beast so I made my own. Based off of the 90's comi...10 comments | ![[War Machine] This War Machine is the one that I wish Toybiz or Hasbro had made. The base was from ROML Neo Classic Iron Man. Head-was a casted Neo Classic IM with a casted target locater and ear port from Toybiz ML War Machine. Modded chest,torso, and crotch to look like WM armor. Modded the back to install retractable weapon system, Yes this WM has retractable weapons. Based off of the IM2 WM, I took the retractable parts from WM Initiative armor and also the arm sockets in order to make this work.after modding the back to allow for a bigger peg and also modding the top of the torso to allow full torso movement.I added the weapon tracks and shoulder pads from the Toybiz WM. Belt-modded belt from TBWM. Arms-sockets from IWM and upper and lower arms from NCIM and gauntlets with guns removed from TBWM and double barrel cannons from IM1 movie "Spec Ops" War Machine.Legs- NCIM top and lower legs,knee pads-sheet styrene, boots- TBWM. Weapons(pictured)- Toybiz WM minigun and rocket box and repo](userimages/customs/46500/46319-1.jpg) War Machine Marvel Legendsby WM23-CUSTOMSThis War Machine is the one that I wish Toybiz or Hasbro had made. The base was from ROML Neo Classic Iron Man. Head-was a casted Neo Classic IM with ...7 comments |
![[Living Laser] I never liked the way how he looked in the cartoon or the original Iron Man toy line. I recreated how he looked in the Iron Man comics, in his laser form. Recipe: Head- Modified MU Human Torch head. I removed the flames and added a piece of styrin sheet for the horns. Shoulder Pads- Styrine sheet. Body- MU Human Torch repainted figure in multiple washes of orange,yellow,white to get the color he is now as seen in the comics. Laser Blast- Ms. Marvel
Thank you for viewing. I welcome any and all comments/feedback.](userimages/customs/40500/40328-1.jpg) Living Laser Marvel Universeby WM23-CUSTOMSI never liked the way how he looked in the cartoon or the original Iron Man toy line. I recreated how he looked in the Iron Man comics, in his laser f...7 comments | ![[Mandarin] Continuing on with my collection of 90's themed customs. I give you THE MANDARIN. I couldn't let Iron Man just roam around without his arch nemesis. Just as he was shown in the 90's Iron Man cartoon. Recipe: Head- MU Namor casted head with sculpted hair. Body- Iron Man 2 Silver Centurion Armor. Removed the jet pack and removed the triangle unibeam. I added some fodder on the torso and the belt/loincloth/leg armor was made from fodder/Gi Joe Iron Grenadier Armor and sculpt for the loin cloth. I used plastic styrine for the symbol. hen Hands- Iron Man 2 Comic Series Mandarin (when I removed the Iron Man hands I relized the pegs were different sizes so I added sculpt to fill the gap) Boots- for the top of the boots I added pieces of plastic styrine and I sculpted the sides of the boots as well. For the ring's blast effect I heated up and melted a plastic sipping straw (lol) Cape- Modified MU Thor cape. Thanks for viewing. I appreciate and welcome all comments/feedback](userimages/customs/40500/40326-1.jpg) Mandarin Marvel Universeby WM23-CUSTOMSContinuing on with my collection of 90's themed customs. I give you THE MANDARIN. I couldn't let Iron Man just roam around without his arch nemesis. J...7 comments |
![[90's Apocalypse] I AM THE APOCALYPSE! For my next custom I wanted to have a 90's Apocalypse.I got the MU Apocalypse and thought that he was cool, but the classic look was always better. Recipe:MU Apocalypse, shoulder pads were separated from the collar,cut the pads to make them more like the ones in the comics/cartoon and removed the bumps and sanded them down.The arm hoses were taken from IM 6" Initiative War Machine. The "A" made from an old MU Magneto cape.The sheild was made from a sheet of styrene and hot glue for the hand attachment.Then a repaint later and boom....Apocalypse is Reborn!](userimages/customs/39500/39468-1.jpg) 90's Apocalypse Marvel Universeby WM23-CUSTOMSI AM THE APOCALYPSE! For my next custom I wanted to have a 90's Apocalypse.I got the MU Apocalypse and thought that he was cool, but the classic look ...5 comments | ![[Hawkeye] I've decided that I needed a Hawkeye to go with my Modular Armor Iron Man and War Machine, so I created my 90's Hawkeye. Just like in the Iron Man cartoon, Hawkeye is shown in this costume.Recipe: MU Dark Hawkeye, lower legs:MU "Patch" Wolverine, modded chain mail armor,and fodder for leg armor. Hawkeye comes with a bow,quiver and arrow. I wanted to do this one for a quite some time, but there werent that many pictures of him in this costume. I even found a picture of the toybiz action figure from the Iron Man cartoon. Thanks for checking this out, later.](userimages/customs/39500/39082-1.jpg) Hawkeye Marvel Universeby WM23-CUSTOMSI've decided that I needed a Hawkeye to go with my Modular Armor Iron Man and War Machine, so I created my 90's Hawkeye. Just like in the Iron Man car...4 comments |
![[Cable (90's Style)] As a kid of the 90's ,watching cartoons was the best thing to do. One of my favorites was the X-Men. Good story and great characters,thus brings my next custom...Cable. He is inspired by the cartoon series and also by the look that he had in the 90's X-Force #1 Comic.Recipe: MU Cable.Cable's gear was made with shoulder pads from MU Apocalypse,harness from G.I. Joe's Iron Grenadier,straps from MU Cable harness, modded Cable belt,armband made from Iron Grenadier ammo belt, and misc. fodder for straps on shoulderpads, right leg, and the gloves and "X" from MU Cable.Well you know what to do, peace out.](userimages/customs/39500/39081-1.jpg) Cable (90's Style) Marvel Universeby WM23-CUSTOMSAs a kid of the 90's ,watching cartoons was the best thing to do. One of my favorites was the X-Men. Good story and great characters,thus brings my ne...7 comments | ![[Psylocke] Not much to this one,Swapped the repainted dark pheonix(hasbro's poor excuse for a head) with a Black Widow's Head,front bang piece MU Sentry hair,pony tail casted from MU Loki. Also added a belt to give her that Jim Lee/MVC2 look.Well thanks for checking this out, later.](userimages/customs/39500/39050-1.jpg) Psylocke Marvel Universeby WM23-CUSTOMSNot much to this one,Swapped the repainted dark pheonix(hasbro's poor excuse for a head) with a Black Widow's Head,front bang piece MU Sentry hair,pon...5 comments |
![[90's Storm] Inspired by the 90's X-Men cartoon, i give you 90's Storm.I wished that MU would have done this already but since they didn't, it was needed to get me closer to having my 90's X-Men complete. Recipe: giant size x-men 35th anniversary Storm,POC Baroness high heels, 2x cast "X" belt symbols from Jean Grey,modded cape from giant size x-men 35th anniversary Storm,belt from fodder and some paint. Been really busy with work and family, but found time here and there to work on these. I think it came out decent but not as good as I'd like it to be. Well as always,comment and let me know what you think so i can improve. Peace out!](userimages/customs/39500/39049-1.jpg) 90's Storm Marvel Universeby WM23-CUSTOMSInspired by the 90's X-Men cartoon, i give you 90's Storm.I wished that MU would have done this already but since they didn't, it was needed to get me...2 comments | ![[Modular Armor Iron Man] I've been wanting to make this for a while took about 2 months working on when I could in between work and family. I was inspired by the second season of Iron Man (cartoon) and thought this would be a good figure to make. Recipe: Head- IM2 Neo classic IM, Upper Torso- MU Sentry with sculpt, Arms- IM2 Neo classic IM and sculpt on gauntlets with fodder, Lower Torso- MU Sentry with fodder, Legs- MU Sentry with fodder. I appreciate any feedback and or input.](userimages/customs/36500/36345-1.jpg) Modular Armor Iron Man Marvel Universeby WM23-CUSTOMSI've been wanting to make this for a while took about 2 months working on when I could in between work and family. I was inspired by the second season...6 comments |
![[War Machine Mark II Model JRXL-1000] When i first saw this i automatically thought.... its War Machine time! Recipe:Head- WM head with sculpt,Torso- WM torso with modded right weapons track and a cast of that track for the left side. and a casted unibeam repulsor from IM2 Neo Classic Iron Man,Shoulder Armor- I had 2 WM's and used the better looking armor,Arms- WM arms and removed ammunition shunt/power cord from the shoulder to the left gauntlet,Legs- WM legs with sculpt on the knees. Then i painted WM to his classic comic book colors.This is my first official custom on this site. I have been a fan of FR for about 2 years but just been too busy with work and moving too much to complete anything. I am a big fan of many of the customizers on this site and appreciate the constructive criticism.Thanks](userimages/customs/36000/35672-1.jpg) War Machine Mark II Model JRXL-1000 Marvel Universeby WM23-CUSTOMSWhen i first saw this i automatically thought.... its War Machine time! Recipe:Head- WM head with sculpt,Torso- WM torso with modded right weapons tra...5 comments | |
|