![[Original Human Torch] This was pretty much a fall in type of custom because I was reading an older issue of West Coast Avengers and saw the character of the Original Human Torch being brought back so I thought what the hell! Toy Biz is NEVER going to make this guy so I thought I'd give it a shot after all he was the first character to be called the Human Torch way back when Marvel was called Timely Comics.](userimages/customs/500/84-1.jpg) Original Human Torch Marvelby Mike MillerThis was pretty much a fall in type of custom because I was reading an older issue of West Coast Avengers and saw the character of the Original Human ...0 comments | ![[Incredible Hulk (Grey)] Just like when the Hulk first appeared was he Green...NO he was Grey and about 30 years later he was both Grey & Green (Figure that one out) So here he is in the '90's version Grey....](userimages/customs/500/86-1.jpg) Incredible Hulk (Grey) Incredible Hulkby Mike MillerJust like when the Hulk first appeared was he Green...NO he was Grey and about 30 years later he was both Grey & Green (Figure that one out) So...1 comments |
![[The Punisher] Lanard Ultra Corps body, dollar store soldier head, Lanard pants and boots, and weapons, homemade bulletproof vest (craft foam wrapped in a spandex blouse my wife was going to throw out)printed out a messenger skin I found at punisher.com and used it as a stencil to paint the skull, The Matrix Neo coat and shoulder holsters, Ultimate Soldier Twin .45's](userimages/customs/500/87-1.jpg) The Punisher Marvelby ThainerLanard Ultra Corps body, dollar store soldier head, Lanard pants and boots, and weapons, homemade bulletproof vest (craft foam wrapped in a spandex bl...0 comments | ![[The Punisher 2] Lanard Ultra Corps body, Dollar Store Soldier Head, hand made pants, shirt and trench coat, Ultimate Soldier weapons and Yahoo messenger skin from Punisher.com as a t shirt stencil.](userimages/customs/500/88-1.jpg) The Punisher 2 Marvelby ThainerLanard Ultra Corps body, Dollar Store Soldier Head, hand made pants, shirt and trench coat, Ultimate Soldier weapons and Yahoo messenger skin from Pun...0 comments |
![[Nick Fury] Ultra Corps Body and Head Ultimate Soldier jumpsuit and weapons, pleather and string eyepatch, toothpick cigar.](userimages/customs/500/89-1.jpg) Nick Fury G.I. Joeby ThainerUltra Corps Body and Head Ultimate Soldier jumpsuit and weapons, pleather and string eyepatch, toothpick cigar....0 comments | ![[Bi-Beast] The figure was made from a rotocast Hulk with an additional Hulk head grafted on. One hand and both feet were sculpted onto the existing base after some trimming. The open hand is a completely original sculpt.](userimages/customs/500/90-1.jpg) Bi-Beast |
![[Deathstroke the Terminator] Deathstroke here was created in his animated costume using a variant Mattel Batman. The armor was sculpted using epoxy putty, the chest belt is a cut piece of thin foam, and the staff is a lollipop stick from Walmart crafts.](userimages/customs/500/91-1.jpg) Deathstroke the Terminator Batmanby Super GDeathstroke here was created in his animated costume using a variant Mattel Batman. The armor was sculpted using epoxy putty, the chest belt is a cut...2 comments | ![[Colossus 1980's] This a custom rendition of Colossus during John Romita Jr.'s run on Uncanny X-Men in the 1980's. His chest was resculpted with Sculpey after pulling off the rubber pieces. The glove cuffs and belt were also sculpted using Sculpey.](userimages/customs/500/92-1.jpg) Colossus 1980's Marvel Legendsby Super GThis a custom rendition of Colossus during John Romita Jr.'s run on Uncanny X-Men in the 1980's. His chest was resculpted with Sculpey after pulling ...1 comments |
![[The Sandman] Custom made Sandman to fit in with the marvel legends line.
Created using a Marvel hulk classics Smart Hulk, Air Drying clay,Acylic paint Sand and an oven cleaner box and a piece of washing mashine connector piping... Plus lots of pva glue..
Eventhough The Sandman was a supervillian he did change sides and teamed up with Spiderman and Silver Sable for a brief time hence Superhero Status...
4" Base to Head total height 8"..](userimages/customs/500/93-1.jpg) The Sandman Marvel Legendsby NoscoCustom made Sandman to fit in with the marvel legends line.
Created using a Marvel hulk classics Smart Hulk, Air Drying clay,Acylic paint Sand and an...0 comments | ![[Jim Balent 90's Catwoman] This figure was made from a Silver Age Catwoman. Heavily retooled. I Dremeled her collar off, smoothed out her shoulders, dremeled off her anklebookts, her hair, her glovelines and pantylines. I removed the cape and skirt and filled in the holes left with sculpy. I sculpted up her chest, over her entire belt/waist, her ankles and the lips of her gloves and boots. The hair came from a Marvel Legends Elektra, which I shortened at the sides so it wouldn't protrude too far on her head. Finally I repainted her mask to reveal her eyebrows, gave the whole figure a purple paint scheme with high gloss boots and gloves.](userimages/customs/500/94-1.jpg) Jim Balent 90's Catwoman DC Directby Ray FerraroThis figure was made from a Silver Age Catwoman. Heavily retooled. I Dremeled her collar off, smoothed out her shoulders, dremeled off her anklebookts...2 comments |
![[Mysterio] I used the Marvel Legends Magneto as a base and added a cut down Marvel Legends Dr Doom cloak. I then went on to use a christmas bauble for Mysterios dome head and attached the dome to the shoulders by creating additional cape material (Fimo)and super glue. I also used some additional fimo to create his eye lapels.. Acrylic paint was used to paint the base fig and the Cloak with an acrylic finishing spray to finalise the final paint job..](userimages/customs/500/95-1.jpg) Mysterio Spider-Manby NoscoI used the Marvel Legends Magneto as a base and added a cut down Marvel Legends Dr Doom cloak. I then went on to use a christmas bauble for Mysterios ...2 comments | ![[Deadpool] vey cool and should be made. This is my first custom hope u all like it](userimages/customs/500/96-1.jpg) Deadpool |
![[New X-Men Jean Grey] I wanted to make a Jean that fit in with the already released New X-Men Wolverine figure. I also didn't want to go too Quitley to make it fit in with the already released Wolvie. The figure is a SOTA movie Tomb Raider, I completely sculpted the hair, belt, entire sweater and over her boots which I dremeled down to try and make them seamless with the pants. I was worried she'd look too much like Angelina Jolie but I realized the figure looked nothing like her anyway so I was okay. I utilized the interchangeable arm feature and gave her an optional coat, which came from a movie Cyclops figure. Originally I had made another short yellow x jacket as another option it looked great but had some sculpt which cracked when I tried to put it on her.](userimages/customs/500/97-1.jpg) New X-Men Jean Grey Marvel Legendsby Ray FerraroI wanted to make a Jean that fit in with the already released New X-Men Wolverine figure. I also didn't want to go too Quitley to make it fit in with ...2 comments | ![[Sublime Beast] Mark Silverstri drew most of the xmen comics i read as a youngin, so his return to the fold got my intrest. at about the same time i was getting into customs.this was the character that cemented my decision to go ahead and cut into that marvel legend I just bought and create the Sublime Beast. Ive been customizing ever since and have gained so much respect for quality work. this is only my first custom but there was alot of hard work put into it](userimages/customs/500/101-1.jpg) Sublime Beast X-Menby Beastmaster-0Mark Silverstri drew most of the xmen comics i read as a youngin, so his return to the fold got my intrest. at about the same time i was getting into...3 comments |
![[Clamp Champ] Just a simple head switch and cut off the big fist and replaced it with a clamp.](userimages/customs/500/105-1.jpg) Clamp Champ | ![[Leech] This fig went through alot of re-designs but im happy with this version](userimages/customs/500/106-1.jpg) Leech |
![[Wolverine] Simple re paint with some added touches..real claws (Steel)..facial hair, arm hair..and cigar.](userimages/customs/500/107-1.jpg) Wolverine X-Menby TMBSimple re paint with some added touches..real claws (Steel)..facial hair, arm hair..and cigar....1 comments | ![[Pumyra] Pumyra was the Thundercats healer, quiet, agile, reserved and well skilled with her pellet sling.](userimages/customs/500/108-1.jpg) Pumyra |
![[Manteena] This sways from the toon version](userimages/customs/500/109-1.jpg) Manteena | ![[Ghost Rider] epoxy putty added to the stikfas figure for the flames, collar, and boots. i carved the head and chest for the details there. the bike has epoxy putty and sheet styrene added to it, plus some minor design enhancements.](userimages/customs/500/110-1.jpg) Ghost Rider Stikfasby John Stevensonepoxy putty added to the stikfas figure for the flames, collar, and boots. i carved the head and chest for the details there. the bike has epoxy putty...1 comments |
![[Eddie Brock..Venom] This is more of a model or sculpture then it is an action figure. I used a Flexible rubber coating for the symbiot alien. A base from Realm of the Claw and beat up a super posable Spidy (Broke neck, twisted arm..etc) Painted hair yellow. The coating worked great, gave the figure a really cool texture.](userimages/customs/500/112-1.jpg) Eddie Brock..Venom Spider-Manby TMBThis is more of a model or sculpture then it is an action figure. I used a Flexible rubber coating for the symbiot alien. A base from Realm of the Cla...1 comments | ![[Demon (Etrigan)] Scratch, sculpey head by Laurie. Suit by Laurie](userimages/customs/500/113-1.jpg) Demon (Etrigan) |
![[Space Ghost] Batman Mego base head, modified and recast in black resin by Brian. Suit by Brian.](userimages/customs/500/114-1.jpg) Space Ghost | ![[Silver Age Batman] Suit is designed and sewn by Brian. Head had a Bravestarr series chin and mouth with the rest custom sculpted and cast by Laurie.
This is a joint submission from Laurie Halbritter and Brian Leitner.](userimages/customs/500/115-1.jpg) Silver Age Batman Batmanby Brian LeitnerSuit is designed and sewn by Brian. Head had a Bravestarr series chin and mouth with the rest custom sculpted and cast by Laurie.
This is a joint s...0 comments |
![[Black Adam] Suit: designed and sewn by Brian. Klingon head, retooled and cast in resin by Laurie.
This is a joint submission from Laurie Halbritter and Brian Leitner.](userimages/customs/500/116-1.jpg) Black Adam Captain Marvelby Brian LeitnerSuit: designed and sewn by Brian. Klingon head, retooled and cast in resin by Laurie.
This is a joint submission from Laurie Halbritter and Brian L...0 comments | ![[Firestorm] At the time I made this I wasn't sure if DCD was going to make one and so I thought I would give it a shot. Overall, this was one of the more involved figures sculpting-wise because of the sleeves and shoulder fins etc. It turned out fairly well I think, although I like DCD's version better, haha.](userimages/customs/500/117-1.jpg) Firestorm DC Directby Brent MontagueAt the time I made this I wasn't sure if DCD was going to make one and so I thought I would give it a shot. Overall, this was one of the more involve...0 comments |
![[Death of Superman] A Death of Superman figure is a project I had been wanting to do for a long time and finally broke down a while ago and made one. I wasn't sure if this version would ever be made so I gave it a shot. Making it was fairly simple and only the sculpting was time consuming.](userimages/customs/500/118-1.jpg) Death of Superman DC Directby Brent MontagueA Death of Superman figure is a project I had been wanting to do for a long time and finally broke down a while ago and made one. I wasn't sure if th...1 comments | ![[Battle Damaged Samurai Wolverine] hating the stupid hair on the boxed set maskless wolverine i decided to do somthin about it.a drimmel is your best friend it make such amazing thing possible.i realized ive never seen a samurai wolverine figure.this custom was made in an attempt to honor both the wolverine and samurai mythos. side note the ninja stars are actually left over plastics from roach baits.](userimages/customs/500/119-1.jpg) Battle Damaged Samurai Wolverine Marvel Legendsby Beastmaster-0hating the stupid hair on the boxed set maskless wolverine i decided to do somthin about it.a drimmel is your best friend it make such amazing thing p...2 comments |
![[HellBoy] I had to dremel off Hulks hair, careful not to put any holes in his very thin dome. (I did anyway). I painted his face and body and sculpted his new wrap around hair and beard out of Quicksteel.](userimages/customs/500/120-1.jpg) HellBoy Hellboyby TMBI had to dremel off Hulks hair, careful not to put any holes in his very thin dome. (I did anyway). I painted his face and body and sculpted his new w...0 comments | ![[Black Knight & Aragorn] This is the Nathan Garrett Black Knight from the first Masters of Evil.](userimages/customs/500/121-1.jpg) Black Knight & Aragorn |
|