![[Major Dutch Schaefer] Base figure is an lcbh marv, hands and head from lcbh savage dragon
I made savage dragon's left arm longer by cutting it from the biceps and forearm. I put metal wires inside to reinforce it and then cover it with epoxy and sculpted new muscles on the whole left arm. I also sculpted the elbow pad and the glove details.
sanded off the cross necklace on marv's neck and chest and made sure the stripy texture of the clothes stay the same.
The robotic right arm was made from a cheap toy gun parts and some plastic strips that were glued together and sculpted over. The elbow joint was a cut up bootleg mini robot joined together to a heavily modified/cut up savage dragon bicep and elbow joint.
I couldn't find a robot hand/fist that is big enough so I just re-sculpted savage dragon's right hand and fingers so that it'd look like a robot's hand.
Most of the work on this figure went into planning and making the robotic right arm. Well, I'm happy it turned out ok.
the bottom part of the right ar](userimages/customs/29000/28521-1.jpg) Major Dutch Schaefer Alien vs Predatorby getsaBase figure is an lcbh marv, hands and head from lcbh savage dragon
I made savage dragon's left arm longer by cutting it from the biceps and forearm....22 comments Rated 4.48 stars ( 164 votes) | ![[Dormammu Marvel Vs Capcom] For this contest I wanted to do a Marvel character, and looking upon those who have appeared in a Marvel vs Capcom and would be cool for my collection I went for Dormammu. (Dormammu appeared in Marvel vs Capcom 3)
The custom was made over a unknown wrestler, which I chopped his neck and head to fit the flaming head, which is a modified Madjack head with Human Torch's upper head flame. The shoulder pads were completely sculpted, as I didn't find anything suitable. I had to completely resculpt the torso and belt (carefully to maintain the middle torso articulation), and make the four spikes. The fire on his hand is spare flames from the Madjack head, which are removable, and I used the Emma Frost cloak to make his back skirt. The armour plates were made with spare plastic of a blister and a old folder.](userimages/customs/28500/28219-1.jpg) Dormammu Marvel Vs Capcom Marvel vs Capcomby argenta-2008For this contest I wanted to do a Marvel character, and looking upon those who have appeared in a Marvel vs Capcom and would be cool for my collection...12 comments Rated 4.43 stars ( 162 votes) |
![[Mai Shiranui] Hey everybody,
From the Capcom vs. SNK series, here is Mai Shiranui. One of my all time favorite fighting-game characters, for obvious reasons. I got one of those Capcom vs. SNK Figures and didn't like it and then when this contest came along, I decided to remake her for it. Her upper body was one of those Kasumi plastic statues, and I cut it up dremeled it down and actually had to resculpt her boobs to give her the famous "Mai endowments". I used a red balloon for her top, I think it came out pretty well. Dust and stuff loves to stick to balloons, and superglue doesn't that well, but I got it to work. In retrospect, I should have used it for her sash thingy, and will probably change that in the future. I gave her the Livewire head, because I kind of like the mischievous smile she has. Forgot to add that I resculpted her thighs and calves to give her a more voluptuous look. All in all, fun to make and I hope ya'll like it.
Head: DCD Livewire/mai ponytail/random ban](userimages/customs/28500/28493-1.jpg) Mai Shiranui Capcom vs. SNKby BDCdieselHey everybody,
From the Capcom vs. SNK series, here is Mai Shiranui. One of my all time favorite fighting-game characters, for obvious reasons. I ...21 comments Rated 4.40 stars ( 155 votes) | ![[Bilstein - Plasma Sword] This is Bilstein, the main villain of the Star Gladiator and Plasma Sword Capcom games. This guy was a really tough job to do, at first I was thinking to make a easier character as I had the pieces required in my fodder box, but finally I decided to make the coolest character even it if was two weeks work.
I started with a Deluxe Wrestling figure, I reshaped his feet, added all the leg paraphernalia, sculpted torso, changed and sculpted hands, sanded a Wrestling head until it had no form at all, added clear plastic to make the weird helmet wings, for the should pads I used the plastic of a blister with epoxi, and finally the Plasma sword with more clear plastic.
Painting; Firstly I applied some layers of black, then painted white all that was going to be yellow, and using two different mixtures of yellow I painted all the details, to get the colour of the darker yellow I used black ink. The sword was painted with many thin layers of yellow to get a bit of a translucid effect.](userimages/customs/28500/28375-1.jpg) Bilstein - Plasma Sword Capcomby argenta-2008This is Bilstein, the main villain of the Star Gladiator and Plasma Sword Capcom games. This guy was a really tough job to do, at first I was thinking...9 commentsRated 4.23 stars ( 150 votes) |
![[Lt. Lyn Kurosawa] Buzzer beater! Haha! A last minute submission! Glad I made it in time. :)
Base figure is a sota street fighter ibuki with psylocke's lower legs and feet.
I was about to finish sanding the hip joints when ibuki's hip joint broke. Arrrgh. Talk about frustrating... I'm one day away from the deadline and this has to happen!? Aaaaaaaaaaargh! So there, I have to improvise and look for other available joints. I don't want to sacrifice a new figure just so I could use the hip joints. Luckily I still have this dismembered movie blackheart lying around that still has it's hip joints. It doesn't match ibuki's leg socket so I have to drill it down and sand it until it fits perfectly.
I then sanded off unwanted details on ibuki's costume, sculpted the armor pieces, right shoulder armor was from a cut up toothbrush holder covered with epoxy and glued on with bits and pieces of cylindrical plastics. Details on the shoes were sculpted, sculpted parts of the hair, painted the figure, and voila! Here](userimages/customs/29000/28522-1.jpg) Lt. Lyn Kurosawa Alien vs Predatorby getsaBuzzer beater! Haha! A last minute submission! Glad I made it in time. :)
Base figure is a sota street fighter ibuki with psylocke's lower legs and f...5 commentsRated 4.21 stars ( 161 votes) | ![[Seth - Street Fighter IV] I chose Seth as is the Capcom I better know that hasn't an action figure, and is at the same time an awesome and unusual design and the main villain of Street Fighter IV. I managed various options of different heads, finally I went for a casted ML Thor face heavily modified with apoxie and all the rest of the head re-adapted. Hands and feet were from SOTA Ryu. There are many color schemes, I went for the purple-blueish matte one, as the complete body illustration that you can easily find by the net.
As it is a quite known character, I haven't felt necessary to include a original pic, if you haven't played Street Fighter IV (go and play it right now!) just google seth capcom.](userimages/customs/28500/28376-1.jpg) Seth - Street Fighter IV Street Fighterby argenta-2008I chose Seth as is the Capcom I better know that hasn't an action figure, and is at the same time an awesome and unusual design and the main villain o...10 commentsRated 4.20 stars ( 153 votes) |
![[Chris and Jill of Resident Evil] Chris Redfield was made on Shield agent base with ronin alternate head and casted guns. Jill Valentine was made from a Maria Hill. All other details were sculpted.](userimages/customs/29000/28528-1.jpg) Chris and Jill of Resident Evil Resident Evilby Foxy-boxing1Chris Redfield was made on Shield agent base with ronin alternate head and casted guns. Jill Valentine was made from a Maria Hill. All other details w...8 commentsRated 4.10 stars ( 153 votes) | ![[Bishamon Copcom] I recycled my Despero custom figure. I wanted to make my Bishamon Version Custom. I thought he was one tough custom to make.. Lots of Sculpting and details to make him more look like real.accessories were mostly rubber foam which I patiently cut and carved.
Hope you like him....](userimages/customs/28500/28480-1.jpg) Bishamon Copcom Capcomby cuztomizaI recycled my Despero custom figure. I wanted to make my Bishamon Version Custom. I thought he was one tough custom to make.. Lots of Sculpting and d...9 commentsRated 4.05 stars ( 148 votes) |
![[Mack the Knife (Captain Commando)] Mack the knife is mummy-like alien from outer space with big knives from Captain Commando video game. The recipe: just basic figure, add some sculpt with epo putty. The shoe is from WWE figure, and the knives is custom made. Paint it with acrylic paint.](userimages/customs/28500/28486-1.jpg) Mack the Knife (Captain Commando) Capcomby bee@FUManMack the knife is mummy-like alien from outer space with big knives from Captain Commando video game. The recipe: just basic figure, add some sculpt w...7 commentsRated 4.02 stars ( 147 votes) | ![[Chun-Li] Here's my entry for the Capcomical Contest. I've always liked Chun Li, I just wanted to see if I could make her hotter, I will let you decide how that came out. So I decided my Chun Li was gonna have bigger boobs, bigger rear, and shaplier, more defined Thighs, not like the Giant Thighs from the NECA Chun Li that made her legs look like Yokozunas. I went for a more anime look, by giving her skinny knees and ankles. Actually a lot of fun to work on, I hope you like her. Let me know what you think.
Head: DCD Vixen (modified) w/ SOTA Chun Li Hair-buns
Upper Torso: Play Arts Final Fantasy VII Tifa
Arms: SOTA Chun Li shoulders (modified)and hands/ ML Shanna
Pelvis: ML Shanna
Legs: WWE Kelly Kelly (heavily Modified)/ Unleashed Spider-man
Feet: SOTA Chun Li (Heavily Modified)
Accessories: SOTA + NECA Chun Li + Scratch build](userimages/customs/28500/28154-1.jpg) Chun-Li Street Fighterby BDCdieselHere's my entry for the Capcomical Contest. I've always liked Chun Li, I just wanted to see if I could make her hotter, I will let you decide how tha...5 commentsRated 4.00 stars ( 155 votes) |
![[Capcom Street Fighter Dee Jay] This is the first time I entering a contest, so I choose a street fighter character: Dee Jay.
Made him from SOTA Adon head (make a cosmetic surgery on his face) and use SOTA Ryu Revo body. Also sculpt his braids and add his MAXIMUM words on his pants (this is hard). Paint him using acrylic paint (both brush & airbrush).
fell free to give any comments, people.
THANKS ;-)](userimages/customs/28500/28437-1.jpg) Capcom Street Fighter Dee Jay Street Fighterby adi.bataraThis is the first time I entering a contest, so I choose a street fighter character: Dee Jay.
Made him from SOTA Adon head (make a cosmetic surgery on...6 commentsRated 3.98 stars ( 152 votes) | ![[Captain Commando] From ones of Capcom action games: Captain Commando. Made from DCUC Aquaman head, body and legs. As for the hands, I choose Bandai's Gundam hands because of their robotic shapes (of course). As usual: sculpt, reconstruct and reshape then paint him with acrylic paint (both brush and airbrush).
Fell free to add any comments.
CHEERS](userimages/customs/28500/28481-1.jpg) Captain Commando Capcomby adi.bataraFrom ones of Capcom action games: Captain Commando. Made from DCUC Aquaman head, body and legs. As for the hands, I choose Bandai's Gundam hands becau...4 commentsRated 3.97 stars ( 146 votes) |
![[Juri] hi all..I have seen lots of street fighter figure in figure realm but I haven't seen Juri figure so far. So I decided to make one. the base figure is ML Psylocke. Sculpted the hair, the clothes, the pants, feet, wrist bands, and the belt too..and then I repainted her..hopefully you guys like it..^^ any comments would be awesome..thank you guyss...](userimages/customs/28500/28397-1.jpg) Juri Street Fighterby MysticHeroeshi all..I have seen lots of street fighter figure in figure realm but I haven't seen Juri figure so far. So I decided to make one. the base figure is ...8 commentsRated 3.89 stars ( 151 votes) | ![[Baby Head (Captain Commando)] I made this one especially for the contest. I really like the technical challenge of this character, almost didn't make it but I'm glad I could finish it on time. The recipe: Basic figure but with huge sculpt on upper body. Took the Savage Dragon Legends for the hands. And the Baby itself is from incredibles keychain. Hoped you guys can enjoy it....
Thanks](userimages/customs/29000/28512-1.jpg) Baby Head (Captain Commando) Capcomby bee@FUManI made this one especially for the contest. I really like the technical challenge of this character, almost didn't make it but I'm glad I could finish...4 commentsRated 3.75 stars ( 141 votes) |
![[Poison Ivy (Plant 43)] A hulking tangle of vines, roughly man-like in form, slowly shambles towards you. The animate plant's bright green and red coloration stand out in stark contrast to the dull concrete and metal architecture of the experimental research complex that you've infiltrated. As the creature draws near, it begins to lash out at you with its' long tendril "arms", but you evade these stiff blows with relative ease. Suddenly, the thing's large, bulbous "head" splits apart and unfolds into three violet flower petals. From the center of this ghastly bloom, a caustic cloud of digestive enzymes jets directly into your face . . .
--------------------------------------------------------------------------------
Poison Ivies are sentient flora that were first encountered in the "B" scenario of Capcom's 1998 Resident Evil 2 Playstation video game (said title was also later ported to other gaming platforms, and Ivy creatures have appeared in several of the successive Residen](userimages/customs/28500/28377-1.jpg) Poison Ivy (Plant 43) Resident Evilby PatrawA hulking tangle of vines, roughly man-like in form, slowly shambles towards you. The animate plant's bright green and red coloration stand out in sta...8 commentsRated 3.67 stars ( 148 votes) | ![[Deadpool!] My first Deadpool, and it coincides with a Capcom contest! Randomly, this fits! Just like cat-dogs, chimichangas, and things that taste purple. While I can't remember if Deadpool was in MvC 1 or 2, I know he's in #3!
Recipe!
-ML Faceoff Punisher
-ML Airattack Wolverine (upper-legs, knees, forearms/hands, guns)
-Totally new headsculpt (with crazy-eyes!)
-ML6 Punisher (feet)
-DCUC Cyborg (belt, heavily modified)
-Rare Earth magnets (in his feet and back)
-Aves Apoxie Sculpt-it
-Random Accessories (from the fodder bin)
Resculpted the hand armor(/textured with a nailfile), Aves'ed-up the lower legs (to add bulk), and shoes. Dremmeled out the back, and installed a high power magnet/sculpted over. This allows for (sadly, not pictured) Ninja sword holster to attach. Dremmeled out the DCUC belt, added magnets, and attached over the figure's waist.
Tweaked the Airstrike Wolverine guns, and added magnets to his holster + grips. The attach to either side now, or can be hand-held. Technically,](userimages/customs/28000/27722-1.jpg) Deadpool! Capcomby blaynescottMy first Deadpool, and it coincides with a Capcom contest! Randomly, this fits! Just like cat-dogs, chimichangas, and things that taste purple. While ...10 commentsRated 3.66 stars ( 155 votes) |
![[Jabberwock S3] The earth shudders and the birds in the canopy overhead take raucous flight as a mass of sickly green flesh crashes into the mossy ground just ahead of you. The lump quivers and rises to its feet, unfolding as it stands, to reveal an obscenity unlike anything you have ever seen. Eight mismatched insect-like limbs, each tipped with a sickle-shaped claw, radiate outwards from a grossly mutated humanoid body. From your intelligence briefings, you recognize the exposed heart on the thing's chest as the tell-tale sign, and vulnerable spot, of the Tyrant series of biological weapons. Raising your automatic rifle, you let loose a burst at the pulsing organ, but, with uncanny reflexes, the creature reacts by shielding the intended target with its many appendages, and your bullets ricochet harmlessly off of its unbelievably tough hide instead. Spittle flies from the monster's many-mandibled maw as it bellows a challenge in return and advances, its scythe-like limbs threshing through the air in](userimages/customs/28500/28423-1.jpg) Jabberwock S3 Resident Evilby PatrawThe earth shudders and the birds in the canopy overhead take raucous flight as a mass of sickly green flesh crashes into the mossy ground just ahead o...7 commentsRated 3.56 stars ( 147 votes) | ![[Joe (Viewtiful Joe)] I really like the hero character, and for me it's very challenging to do custom with deform style (cause it's rarely been done). So here it is, the body is from 6" Quicksilver Hasbro - the head is from 12" Superman DCUC. Epo putty for some sculpting on the head and acrylic paint for the final touch.
Hope you like it, Thanks](userimages/customs/28500/28485-1.jpg) Joe (Viewtiful Joe) Capcomby bee@FUManI really like the hero character, and for me it's very challenging to do custom with deform style (cause it's rarely been done). So here it is, the bo...4 commentsRated 3.45 stars ( 141 votes) |
![[Frank West] We all love Zombies and we all love video games, right? Why not put these two ingredients together along with a totally awesome, yet unlikely hero, mix in some "Day of the Dead" and call it Dead Rising?!? Well, that is what our friends at Capcom have done, and in doing so we were introduced to Frank West. The photojournalist turned zombie-killer who has a penchant for getting into tight spots. This figure is a representation of Frank using a Hot Toys 1:6 scale TrueType male body and other accessories from around the 1:6 universe. A custom painted face and a few blood-splatter marks later and we have our very own Dead Rising Action Figure! I am surprised that Capcom hasn't optioned Frank and the gang out for statues, figures, models, or any other type of products that, at least I know I'd buy in a heartbeat. Zombies have been all the rage lately; from television and movies to figures and comics. It would be a win/win for Capcom... Until then though, 1:6 Frank will keep my toy](userimages/customs/28500/28287-1.jpg) Frank West Capcomby OrnclownWe all love Zombies and we all love video games, right? Why not put these two ingredients together along with a totally awesome, yet unlikely hero, mi...1 commentsRated 3.40 stars ( 142 votes) | ![[Ginzu the Ninja (Capcom Captain Commando)] From Capcom Captain Commando series: Ginzu the Ninja. Made from DCUC Aquaman, re-sculpt the head and other details with epoxy putty then paint him with acrylic paint (brush and airbrush).
Don't hesitate to leave any comments guys.
THANKS](userimages/customs/29000/28506-1.jpg) Ginzu the Ninja (Capcom Captain Commando) Capcomby adi.bataraFrom Capcom Captain Commando series: Ginzu the Ninja. Made from DCUC Aquaman, re-sculpt the head and other details with epoxy putty then paint him wit...5 commentsRated 3.36 stars ( 140 votes) |
![[Marvel Vs Capcom Sentinel] I tried to make the sentinel as he appeared in Children of the Atom and then Marvel vs Capcom. I have used clay only, later I will make him in action figure form. Peace.](userimages/customs/29000/28524-1.jpg) Marvel Vs Capcom Sentinel Marvel vs Capcomby anâtmanI tried to make the sentinel as he appeared in Children of the Atom and then Marvel vs Capcom. I have used clay only, later I will make him in action ...7 commentsRated 3.30 stars ( 141 votes) | ![[Lisa Trevor] A scream of hopeless despair freezes the blood in your veins as someone, or something, smashes the wooden door behind you to splinters. A woman, clad in a filthy torn dress, with chains dangling from her shackled ankles and her wrists permanently bound together inside a metal-reinforced block, forces her way into the room. Her head is concealed by a patchwork hood made from what appears to be the leathery skin of several human faces--doubtlessly trophies from previous victims. Terrified beyond all reason, and trapped with nowhere to run, you draw your automatic pistol and empty the entire clip into her. She staggers backwards from the impact of the bullets and, to your horror, several long tentacles begin to emerge from the empty eye sockets, nostrils, mouths, and ears of the grisly visages hiding her true face. Even more surprising, she doesn't fall, in fact, the woman seems to have suffered no serious injuries whatsoever. Your empty weapon falling from your trembling hands, you cower](userimages/customs/28500/28424-1.jpg) Lisa Trevor Resident Evilby PatrawA scream of hopeless despair freezes the blood in your veins as someone, or something, smashes the wooden door behind you to splinters. A woman, clad ...2 commentsRated 3.28 stars ( 144 votes) |
![[Arthur the Knight] A series of video games that I felt always deserved some sort of figure, gashapon, statue, or even plush iteration is Capcom's Ghosts'N Goblins. Year after year G'NG was denied... until now. I immediately thought of good 'ol Arthur, the brave knight, when I read about the Capcomical custom contest. Although the actual red treasure-chests don't make an appearance until "Ghouls'n Ghosts," I included one in my submission even though the character is based on Arthur as he first appeared in 1985. (Hence the more comical and pint-sized proportions.) Hopefully I can get around to creating a Red Arremer for Arthur to do battle against!
Recipe:
Arthur = A Sir Trollahad Figure from the Battle Trolls figure line is used for the base body. Everything else is Sculpey III.
Base = A cheap pre-cut round craft wood bought at Michael's Crafts (usually used for home-made clocks.) Grass, tombstone, and rocks are all made of Sculpey III.
Chest = A small do-it-yourself jewelry box found at most](userimages/customs/28500/28203-1.jpg) Arthur the Knight Capcomby OrnclownA series of video games that I felt always deserved some sort of figure, gashapon, statue, or even plush iteration is Capcom's Ghosts'N Goblins. Year ...4 commentsRated 3.18 stars ( 143 votes) | ![[War Machine (Marvel Vs Capcom 2)] I create this figure to realizition war machine from games marvel vs capcom 2. The base figure concept from war machine armor marvel vs capcom 2.(Enjoy this figure!)](userimages/customs/29000/28505-1.jpg) War Machine (Marvel Vs Capcom 2) Marvel vs Capcomby AE-ProjectI create this figure to realizition war machine from games marvel vs capcom 2. The base figure concept from war machine armor marvel vs capcom 2.(Enjo...2 commentsRated 3.17 stars ( 140 votes) |
![[Ironman ( Marvel Vs Capcom 2)] I create this figure to realizition my favorite character ironman modular from game marvel vs capcom 2.The base concept from ironman modular armor and this figure can open the mask looks like marvel face off series.(Watch it!)](userimages/customs/29000/28504-1.jpg) Ironman ( Marvel Vs Capcom 2) Marvel vs Capcomby AE-ProjectI create this figure to realizition my favorite character ironman modular from game marvel vs capcom 2.The base concept from ironman modular armor and...2 commentsRated 3.15 stars ( 144 votes) | ![[Resident Evil Tyrant] Capcoms resident evil game,,,"tyrant"
There are many different types of tyrants. They are a series of biologically engineered organisms created by the umbrella corporation to serve as potential super soldiers. They all have different strengths and weaknesses. Some look very cool, but all are very bad
Abomination base figure
Took left arm off at the mid section, added a fodder hand and sculpted to remaining arm, sculpted claws
Took spikes off and added to upper left shoulder/chest area
Sanded all spikes down from back, hands, and everywhere else
Removed half of both legs, sculpted new legs and feet
Sculpted partly exposed heart and many details throughout entire figure
also filled in mid stomach cavity section and sculpted
Base painted black, then added many dry rubs of blue, gray, brown, red, and black
Still has all articulation except left wrist and both ankles
Please leave comments,,,hope you enjoy,,,thank you](userimages/customs/28500/28458-1.jpg) Resident Evil Tyrant Resident Evilby toysandpets1Capcoms resident evil game,,,"tyrant"
There are many different types of tyrants. They are a series of biologically engineered organisms cre...3 commentsRated 3.08 stars ( 146 votes) |
![[Mayor Mike "Macho" Haggar] Here he is, Capcom's iconic character appearing in Final Fight, as well as Street Fighter and several other titles, Mayor Mike Haggar A.K.A. Mike "Macho" Haggar. Haggar is a former professional wrestler who became the mayor of Metro City. When Haggar refused to allow the Mad Gear Gang to bribe him, they kidnapped Haggar's daughter, Jessica. Haggar with the help of Jessica's boyfriend Cody and their friend, Guy, set out to save her. Haggar is commonly associated with the popular Street Fighter character Zangief because they are both large bodied wrestlers. Haggar's weapon of choice is a large pipe he uses to brutal smash his foe, which he can be seen with here.
This Custom was a last minute submission and I hadn't had time to add how he came to be. Originally, I started off wanting to make a Darkstalkers Sasquatch. After getting all the fodder together cutting, hacking, and dremeling it to size, a difficult task given his width and height requirements, I realized there was no](userimages/customs/29000/28527-1.jpg) Mayor Mike "Macho" Haggar Final Fightby RedRebelCustomsHere he is, Capcom's iconic character appearing in Final Fight, as well as Street Fighter and several other titles, Mayor Mike Haggar A.K.A. Mike &quo...3 commentsRated 3.01 stars ( 139 votes) | ![[Ken Masters] I realize this is a simple custom but I couldn't stand Ken's hair design from SF IV. I went with a little more anime style to give him his cool factor back that the new mullet-bowl do took away. Anyways, I took the original hair off and completely sculpted his new hair. I gave him a few fire effects as well to add a little more punch to my Ken. I hope you guys like him as I am very pleased with his new look.](userimages/customs/29000/28516-1.jpg) Ken Masters Street Fighterby billmaruI realize this is a simple custom but I couldn't stand Ken's hair design from SF IV. I went with a little more anime style to give him his cool facto...1 commentsRated 2.96 stars ( 136 votes) |
![[Nathan "RAD" Spencer] Nathan was a soldier in the Federal States of America armed forces, the FSA having risen out of the ashes of the USA after its economic collapse, until he lost his arm to a grenade. While on medical leave he was given a position with the FSA's R&D branch known as T.A.S.C. under the supervision of the famous Joseph "Super Joe" Gibson. Given the designation R.A.D #1, Research And Development subject 1, as he was the prototype Rad would become his nickname for years to come. It is during testing that the Imperial Army attacked with the aim of bringing Hitler back to life as their leader. During a secret mission Super Joe is captures and Spencer is sent in to rescue him. After rescuing Joe, who is later promoted to head of TASC, RAD continues to serve as more Bionic Commandos are created until the public and military turn on them fearing them which eventually plays a part in his death sentence and the events of Bionic Commando 2 for the Xbox 360.
The base is from a DC Direct](userimages/customs/28500/28021-1.jpg) Nathan "RAD" Spencer "V"by wesrNathan was a soldier in the Federal States of America armed forces, the FSA having risen out of the ashes of the USA after its economic collapse, unti...0 commentsRated 2.58 stars ( 141 votes) | ![[Maximum Zangief] So I've been wanting to use this Maximum Sweat figure for a custom for a while and just didn't know what to use it for. I had thought of doing some newer wrestler or maybe a DP but wasn't quite sure till I saw this contest posted. Then I knew I had to make a Zangief. I'm not a huge Street Fighter fan but I just saw Zangief in this base and had to bring it out.
I filled the screw holes with sculpt and added the beard, mohawk, chest hair and sanded off some of Kane's wrestling tights so it would seem that it was just skin and not tights. The belt, wrist bands, and bands on the tops of the boots are all wide rubber bands. He was painted with model master acryl and some other brand for the yellow. I decided not to put the "scars" on him cos I've seen pics of him w/o em and he looked a lot better to me.
Zangief fits in to the contest because he's in the capcom game Street Fighter.](userimages/customs/29000/28511-1.jpg) Maximum Zangief Street Fighterby mega_star_androSo I've been wanting to use this Maximum Sweat figure for a custom for a while and just didn't know what to use it for. I had thought of doing some n...3 commentsRated 2.43 stars ( 138 votes) |
|