![[Myconid (Patraw)] A contest to honor one of the Realm's true master artists, Patraw? I'm in!
There are so many impressive/inspiring Patraw pieces to choose from. I finally decided for Patraw's beautifully crafted Myconid (Challenge Custom) figure.
I tried my best to be true to both the reference art that Patraw posted in his Myconid submission as well as his amazing work-of-art, but with my own added twist.
Body - A movie Spawn with head and hands removed. I felt the details on this figure were perfectly fungus-like. Sculpted half the body to make it look less 'spawnish' while trying to keep as many of the intricate details that this figure already had.
Hands - A set of old TMNT hands were used.
Head - Sculpted the face. Created a frame using the top of a water bottle, MOTUC Sy-Klone's red shield, a straw and some blister plastic. Then, completed sculpted over this frame using Aves Apoxie, packing in as much detail as I could. The sculpting was done over several days and in layers.
A true tes](userimages/customs/44000/43963-1.jpg) Myconid (Patraw) Dungeons and Dragonsby NeCrollectorA contest to honor one of the Realm's true master artists, Patraw? I'm in!
There are so many impressive/inspiring Patraw pieces to choose from. I f...70 comments Rated 4.44 stars ( 91 votes) | ![[Fox Demon "Painted Skin" Movie] I would like to try how it is On the shoes of Mr. Patraw, so I decided to make an entry that is from raw materials and the rest are all sculpted and painted.
My inspiration was the Fox Demoness from PAINTED SKIN.
Initially I formed the wire into a human figure then wrapped it and sculpted it slowly with Water Stop clay until it is hardened. Then painted it.
My experience in doing this was so indescribable. I know now how hard it is to make a PATRAW MASTERPIECE.. So guys, every time you see Mr. Patraws works, please give him your applause.. It needs a heart, patience and full dedication to make a single piece.](userimages/customs/44000/43838-1.jpg) Fox Demon "Painted Skin" Movie Animeby cuztomizaI would like to try how it is On the shoes of Mr. Patraw, so I decided to make an entry that is from raw materials and the rest are all sculpted and p...26 comments Rated 4.08 stars ( 78 votes) |
![[Thor Frog] I am really proud of Thor Frog, here. The eagle eyed among you might recognize some of the parts used from existing figures. Some pieces were created using Magic Sculp. Thor Frog "stands" approximately two inches, because he isn't really designed to be standing with his legs fully extended. I tried to create an appearance that was a mix of a real frog with some cartoon like stylizing. There is an area in his back to allow him to be displayed jumping using a Superhero Showdown or similar figure stand. Thanks for looking, I hope you enjoy viewing Thor Frog as much as I enjoyed making him.](userimages/customs/43000/42782-1.jpg) Thor Frog Marvel Legendsby ayelidI am really proud of Thor Frog, here. The eagle eyed among you might recognize some of the parts used from existing figures. Some pieces were created ...21 comments Rated 4.04 stars ( 89 votes) | ![[Lobo Vs. Despero] A Friend asked me if I can make a small diorama of LOBO VS. DESPERO. So he gave me these two HEROCLIX Base Figure and I was overwhelmed how small and so difficult to sculpt.
So I used wires and rubber foam to make the bricks and the ruins. After Assembling, them. painting is also difficult since they so small! I think they are even less than an Inch..
Anyways, hope you liked them.](userimages/customs/44000/43845-1.jpg) Lobo Vs. Despero DC Directby cuztomizaA Friend asked me if I can make a small diorama of LOBO VS. DESPERO. So he gave me these two HEROCLIX Base Figure and I was overwhelmed how small and ...7 commentsRated 3.95 stars ( 80 votes) |
![[Bile Demon] "A Bile Demon has entered your dungeon. It will eat you out of house and home, but treat it well and it makes an excellent combatant and may even spend time in the workshop manufacturing traps for your dungeon."
For my first contest entry I chose the gluttonous, gaseous Bile Demon. He is one of my favourite creatures from my favourite game: Dungeon Keeper. The Bile Demon is one of the largest creatures in the game, and is so bulky that he must move around by picking himself up on his hands and then heave his enormous gut forward. He fights with two spiked flails attaches to his horns, or various deadly gas attacks. Bile Demons spend most of their time eating and sleeping, but will do combat training or manufacturing if needed. They detest Skeletons and will fight with them if their lairs are too close together. This particular Bile Demon is depicting the pose it strikes after being slapped by the hand of evil.
This figure is made entirely from scratch and features four poin](userimages/customs/43500/43217-1.jpg) Bile Demon Dungeon Keeperby Malnu"A Bile Demon has entered your dungeon. It will eat you out of house and home, but treat it well and it makes an excellent combatant and may even...7 commentsRated 3.85 stars ( 78 votes) | ![[Tyrant 091] A Tyrant variant that appeared in Capcom's 2003 Resident Evil: Dead Aim (original Japanese title: Biohazard Gun Survivor 4: Heroes Never Die) Sony Playstation 2 video game.
This prototype B.O.W. (Bio Organic Weapon) was created by infecting a human host with the tG-virus (a hybrid of the t-virus and G-virus from previous Resident Evil installments.) However, the resulting T-091 was considered a failure, because it did not exhibit the ability to generate bio-electromagnetic energy, which was the primary goal of the experiment. It also suffers from an exposed heart, a flaw common to many Tyrant variations, although, in this case, the organ protrudes from the creature's back, rather than the chest. These two shortcomings were ultimately corrected in the improved T-092 model (Morpheus D. Duvall).
While it may not have lived up to the expectations of the scientists that created it, the T-091 is still an extremely dangerous adversary. Like most Tyrants, it possesses superhuman strength,](userimages/customs/44000/43910-1.jpg) Tyrant 091 Resident Evilby PatrawA Tyrant variant that appeared in Capcom's 2003 Resident Evil: Dead Aim (original Japanese title: Biohazard Gun Survivor 4: Heroes Never Die) Sony Pla...5 commentsRated 3.78 stars ( 76 votes) |
![[Cyclops] Sculpted over the HOH Venom figure
Spiked club is a needle with Super Sculpey and toothpicks
base is from Heroclix with sculpted ground
the cyclops stands 1.25" without the club, 2" on the base with the club
Have been working on some 25mm minis for a Dungeon Dwellers game I have and I didn't want to paint the vintage LEAD ones that came with the game. So, I have bought some Reaper ones and several Heroclix and some of the Handful of Heroes to make my own. I really felt a Cyclops was needed for added fear that the game should invoke, searching around the "crypt of the sorcerer" and this was the also the perfect chance to make something in honor of Patraw and his awesome talents. This really makes me appreciate his skills that much more!](userimages/customs/44000/43904-1.jpg) Cyclops Dungeons and Dragonsby fastfreddieSculpted over the HOH Venom figure
Spiked club is a needle with Super Sculpey and toothpicks
base is from Heroclix with sculpted ground
the cyclops st...5 commentsRated 3.73 stars ( 74 votes) | ![[Halo Kitty] Yep thats right you read the title correctly. The moment I saw these blind pack kitties i knew right away what i wanted to create.
Full sculpt job, the only parts i left alone were the ears, arms, feet, and area around the eyes. It took almost 8 hours of sculpting time. Not all in one session. I had to sculpt certain areas and had to wait til its was dry before moving on. The painting is not 100%, while taking photos i noticed a few issues. I can honestly admit im not the best at painting but its progress not perfection lol. I hope you enjoy this and please leave feedback.](userimages/customs/43000/42948-1.jpg) Halo Kitty Haloby markiemarkyYep thats right you read the title correctly. The moment I saw these blind pack kitties i knew right away what i wanted to create.
Full sculpt job, t...6 commentsRated 3.24 stars ( 79 votes) |
![[Shadowhorn (Venom's Pet)] Here is my custom for the Patraw contest. Head is made from a missile of my Venom, the body is from the launcher. Horn is come from dinosaur' tail. Its feet was came from a digimon character(don't know who it was) And it has three tails: The two at the upper part was made from wires and the lower tail was made from a paper crumpled and formed into a tail. Then painted the whole figure with acrylics. Hope you like it, God bless!!](userimages/customs/44000/43658-1.jpg) Shadowhorn (Venom's Pet) Originalby Jan14Here is my custom for the Patraw contest. Head is made from a missile of my Venom, the body is from the launcher. Horn is come from dinosaur' tail. It...8 commentsRated 3.06 stars ( 77 votes) | ![[Darth Vader] I had this Magneto heroclix for a while and wasn't sure what to make it into until I heard about this contest. So I decided to go with a classic Darth Vader from ANH.
Repainted Magneto in three shades of black his suit is greyish black, his helmet is shiny black, and the cape a matte black.
The helmet was re-shaped with puffy paint, and then detailed with metallic markers and a triangle painted piece of vinyl added to the front of the helmet.
His belt, and chest piece are also painted detailed vinyl pieces with a small chain added at the neck. The inner half cloak is real material cut and sewn behind the vinyl pieces.
Finally his lightsaber which is removable is cut from a plastic piece repainted and detailed.](userimages/customs/43500/43409-1.jpg) Darth Vader Star Warsby RogueI had this Magneto heroclix for a while and wasn't sure what to make it into until I heard about this contest. So I decided to go with a classic Darth...8 commentsRated 2.88 stars ( 78 votes) |
![[Hand of the Miniature Master] The hand of the miniature master!!
A mythical disembodied hand known to frequent figurerealm dot com and other modelling websites. The hand of the miniature master has the ability to summon a miniature version of any item it may need or want. It uses it's miniatures in a never ending quest to rule the world of miniature making. Although the hand often creates minis from popular media such as DC comics, Thundercats and Transformers, it's main weapon are its vintage video game characters. The more obscure the better for the hand as this only means his enemies will have little knowledge of how to fight the miniature. It is thought that the left hand is always accompanied by a right hand but this has never been proved as the right is a shy and elusive hand.
Materials:
Twistie Tie armature
Tissue Paper
News print
Red Crepe paper
PVA glue
PVA glue and citadel paints mixture
If this contest has done one thing for me, it's made me appreciate Patraw's skills even more, working at this s](userimages/customs/44000/43892-1.jpg) Hand of the Miniature Master Miscby EDarthTThe hand of the miniature master!!
A mythical disembodied hand known to frequent figurerealm dot com and other modelling websites. The hand of the m...10 commentsRated 2.77 stars ( 73 votes) | |
|