![[Zer0: as a NUMBER] DAMN! I see someone else beat me to it. Here's my version of Zer0 from Borderlands 2!!! I love this game and this character!
I started off with a ROML Bucky Cap figure. I removed the belt and cut off the boot cuffs. I sculpted his shoulder, upper arm, lower arm armors; his chest and stomach; belt & side pockets; kneepads; and his 2 toed boots with buckles etc. Unfortunately I didn't attempt the 3 fingered gloves as I wasn't sure how to do so. He has 2 straps in the back (which I forgot to take a pic of) one holds his sniper rifle (or any gun) and the other for his sword (didn't make one yet) based painted the figure black and painted appropriate areas different greys (at first I wanted to paint him with one of the unique skins *Pandoracorn wink wink* but figured I just stick with his traditional skin with the red zero on his chest.) Painted red zero on his chest.
The most time consuming and difficult part of the custom was creating his heads. I plan on "trying" to compl](userimages/customs/47000/46686-1.jpg) Zer0: as a NUMBER Borderlandsby Eniam_RejDAMN! I see someone else beat me to it. Here's my version of Zer0 from Borderlands 2!!! I love this game and this character!
I started off with a ROM...7 comments Rated 4.19 stars ( 78 votes) | ![[Quake 1 Shambler] ''...suffering from near-fatal wounds, I was trying to find my way through darkness, in an endless labyrinth of chambers, holding tight my last serviceable weapons, a double shot-gun with last few shells and an heavy double axe. Cautious as if Death waited for me behind every corner, lost in a silent corridor, I could only hear the fast beating of my heart. Suddenly, a deep roar thrilled my soul: from the other end of the corridor, something like a giant white gorilla or a standing polar bear, 12 feet of height, came out of darkness. Fearful jaws shined in his head, and giant claws armed his limbs; a long whitish gory fur gave him a even more fearful aspect. That view reminded me in all details the description I have been told many years before by an old veteran at the Space Marine Training School. But soon I also discovered another abominable detail: he could generate a powerful lighting, combining the upper limbs upon his head. A sudden flash and a swish, that luckily just missed me.](userimages/customs/46000/45971-1.jpg) Quake 1 Shambler Quakeby roberto.bracciante''...suffering from near-fatal wounds, I was trying to find my way through darkness, in an endless labyrinth of chambers, holding tight my last servic...6 comments Rated 3.92 stars ( 72 votes) |
![[Alpha Skag] Catch a Skaaaaag!
The Skag is a cave dwelling, weapon eating, acid spitting, face lunging little nightmare from the Borderlands series. They can usually be found in packs with varying breeds of skag to make your day a little less sunny. The leader and toughest of these packs is the Alpha Skag, a well armored powerhouse of a creature that can make short work of a less than cautious vault hunter. This particular skag is modeled in a threatening position, just before being shot square in the mouth by Mordecai with a high powered Jakobs brand sniper rifle... Because if it took more than one shot, it isn't a Jakobs.
This piece also features a "skag pile": a regurgitated pile of bones and metal bits that the skag couldn't digest properly. Skag piles often yield useful loot such as cash, ammo, weapons, and sometimes even body parts! It can be seen that this pile contains a magazine for an assault rifle... looks like some lucky vault hunter is gonna get his hands dirty!
This custo](userimages/customs/47000/46697-1.jpg) Alpha Skag Borderlandsby MalnuCatch a Skaaaaag!
The Skag is a cave dwelling, weapon eating, acid spitting, face lunging little nightmare from the Borderlands series. They can usua...6 comments Rated 3.89 stars ( 71 votes) | ![[Angel- Borderlands 2] I stared by popping off Spider Woman’s head and then grinding down the neck so Soranik Natu’s head would fit in its place. I then sculpted the costume components onto the body using Aves Fixit sculpt. Next, I ground down one side of Natu’s hair to make the shaved part of Angel’s head, after which I painted her face. When that dried, I sculpted her hair. After several sculpting phases adding detail to her body, I stated the paint job, using citadel paints. I went for a gloss coat over her costume to give a shiny leather look, while doing a matte coat over the skin to protect the paint on the joints. I added the head and body together, and then drilled a hole for the flight stand. I added a few “outline” details into the paint job with black in an effort to recreate the cell shaded look of the game. The wings (made from blister pack) are attached to the flight stand so the figure only has them when flying.
She fits nicely into the FSP Fiesta th](userimages/customs/47000/46581-1.jpg) Angel- Borderlands 2 Borderlandsby EbonStaarI stared by popping off Spider Woman’s head and then grinding down the neck so Soranik Natu’s head would fit in its place. I then sculpte...5 commentsRated 3.31 stars ( 71 votes) |
![[Quake 1 Player] I have made the Quake 1 marine character (player), in honor to the hundreds hours spent more than 15 years ago on this mighty game.
Sculpted in green stuff and plasticard on an Indiana Jones range figure, trying to give to it that gothic appeal like the game had.
90% of figure surfaces were covered with green stuff, so base figure is only hardly recognizable.
Axe and double shotgun were scratch-built in plasticard and metal tubes.
Hope you like it!
Cheers](userimages/customs/46000/45516-1.jpg) Quake 1 Player Quakeby roberto.braccianteI have made the Quake 1 marine character (player), in honor to the hundreds hours spent more than 15 years ago on this mighty game.
Sculpted in green...3 commentsRated 3.30 stars ( 66 votes) on eBay Now! | ![[Master Cheif] Full resculpt on this puppy, The only thing on here that is not ML8 Ironman, is the Head ( ML Ult Ironman retooled.) Shoulder Pads (?)and hands (Dredd) Lots and lots of sculpt and Paint apps.](userimages/customs/45500/45418-1.jpg) Master Cheif Haloby cowboyinkFull resculpt on this puppy, The only thing on here that is not ML8 Ironman, is the Head ( ML Ult Ironman retooled.) Shoulder Pads (?)and hands (Dredd...3 commentsRated 3.09 stars ( 74 votes) |
![[Dayz Survivors] I love the videogame DayZ. It's a mod for the game ARMA2, a military simulation.
The game has both 3rd person and first person and is played by over a million players worldwide.
It's about zombies and survival.
I wanted to buy action figures for them but they just did not exist.
So I did the next best thing and made my own.
I started with a 12 inch dragon brand military figure then I wanted something more articulated and found a hot toys military figure and used that as my first prototype. They proved popular from fans of the game so I made a whole squad of 6 different survivors including 3 basic survivors, a Hero, a Bandit and a Camo survivor.](userimages/customs/45500/45002-1.jpg) Dayz Survivors Randomby zSc0peI love the videogame DayZ. It's a mod for the game ARMA2, a military simulation.
The game has both 3rd person and first person and is played by over ...2 commentsRated 3.01 stars ( 71 votes) | ![[Zer0: the Assassin] GET READY TO JOY PUKE YOUR FACE OFF!!! Cause my first Borderlands 2 custom figure is out! Ands its the Assassin himself! Zer0. this figure took alot of sculpting and custom paint mixes. He is a NECA Vector with a heavely modified venom head
, also the sword is real steel that I sharpened myself. unforgenetly you cant really see the 0 all that well in the picture :/, but ill see you guys and gals later!
~Ten](userimages/customs/45500/45321-1.jpg) Zer0: the Assassin Resident Evilby ProtocolTenCustomsGET READY TO JOY PUKE YOUR FACE OFF!!! Cause my first Borderlands 2 custom figure is out! Ands its the Assassin himself! Zer0. this figure took alot o...9 commentsRated 2.90 stars ( 71 votes) |
![[007 James Bond N64s Goldeneye] I scraped straight cuts off of a wrestler in a suit to give it the polygon look. used clay to sculpt out the head, silencer, and torso. and printed out the face. used flat black and gloss black](userimages/customs/47000/46729-1.jpg) 007 James Bond N64s Goldeneye James Bondby Flavor of MottI scraped straight cuts off of a wrestler in a suit to give it the polygon look. used clay to sculpt out the head, silencer, and torso. and printed ou...5 commentsRated 2.79 stars ( 73 votes) | |
|