![[Archangel] I picked up a spare ML Archangel, just so I could paint the wings but went ahead and gave him a full makeover. I didn't see any reason for this fella to have gun hands, so I switched his hands out for the left hand of claw and right fist of a wolverine. I repainted him from head to toe and gave him full mirror chrome wings. Simple custom, but thrilled with the outcome.
~Jim](userimages/customs/50000/49561-1.jpg) Archangel Marvel Legendsby horton'sheroesI picked up a spare ML Archangel, just so I could paint the wings but went ahead and gave him a full makeover. I didn't see any reason for this fella ...8 comments | ![[X-Force Archangel] With original wings having some articulations.
Poor painting ...](userimages/customs/49500/49349-1.jpg) X-Force Archangel |
![[Archangel] Archangel is one of my favorite X-men characters and has appeared different ways over the years. In his blue and white outfit he has both metal and feathered wings so I created a custom to reflect this using a Superman Blue body, modded 200X He-Man head, Marvel legends 2013 Archangel wings sprayed with Testors One Coat lacquer Diamond Dust, and Hawkman wings attached to ball joints. Both wing sets are removable so you can have this high-flying mutant in either form!](userimages/customs/49500/49335-1.jpg) Archangel Marvel Legendsby Jin SaotomeArchangel is one of my favorite X-men characters and has appeared different ways over the years. In his blue and white outfit he has both metal and fe...7 comments | ![[Archangel X-Force] I decided to give it a new body to my archangel and use as a basis to Cyclops jim lee, changing hands and some paint and go.
hope you like it.](userimages/customs/49500/49175-1.jpg) Archangel X-Force |
![[Archangel] The Dark Angel Saga was such a great story that I had to try and make this custom. It also gave me a chance to experiment with making better wings for Archangel.
His wings can also swap out and be replaced with their cape like configuration.](userimages/customs/49500/49113-1.jpg) Archangel Marvel Legendsby warrackThe Dark Angel Saga was such a great story that I had to try and make this custom. It also gave me a chance to experiment with making better wings for...58 comments | ![[X Force Archangel] Not a lot to say on this one, just a non-simple repaint. Obviously a lot of line work. Was defintely an excercise in patience as I went back and refined lines with black, then repainted with silver, then black, then silver......
Part of my MU custom X-Force team, posting that once all the members are up.](userimages/customs/49000/48733-1.jpg) X Force Archangel Marvel Universeby Zebus_0Not a lot to say on this one, just a non-simple repaint. Obviously a lot of line work. Was defintely an excercise in patience as I went back and refin...2 comments |
![[Archangel] Made this custom for Bryan Giusti so he can add to his roided out super customs. This is a recipe he conjured up. Savage Dragon upper body, Wraal legs and a set of WWE Boots, the head is McFarland Ripclaw and the wings from a DCU Hawkman. Pics did not come out as clear as I wanted. Hope you like it.](userimages/customs/49000/48550-1.jpg) Archangel Marvel Legendsby StevidMade this custom for Bryan Giusti so he can add to his roided out super customs. This is a recipe he conjured up. Savage Dragon upper body, Wraal legs...38 comments | ![[Archangel with Real Metal Wings] This is my 1st submission to figure realm. It is Archangel, based on the cover of X-Factor # 58 ("The vampire Issue").Unsure of what the base figure was, as it was a gift, but my brother thinks it's name was a synonym of "Leech". He kind of looked like a burn victim, with no eyes and not much of a mout. Dremeled in the eye sockets and mouth. Sculpted eyes and teeth. Sanded down "burney, wrinkly" texture of skin and sculpted mask and some outfit details. Wings are made of real metal. Some edges are lined with Green stuff to reduce the possibility of him actually slicing you. The back "Wing Sheath" is made of a combination of metal and apoxy.](userimages/customs/47000/46995-1.jpg) Archangel with Real Metal Wings Marvel Selectby Davey BlazeThis is my 1st submission to figure realm. It is Archangel, based on the cover of X-Factor # 58 ("The vampire Issue").Unsure of what the bas...17 comments |
![[Archangel (Xforce)] This is xmen classic archangel. Full repaint with flat black, sculpted the line detail and also the finger nails :D](userimages/customs/44500/44378-1.jpg) Archangel (Xforce) | ![[Archangel Chibi Version] Here is our version of archangel chibi style. It is made from a luffy one piece figure. The head is sculpted , legs and arms are also sculpted. The wings are made from styrene plastic. Hope you like it guys!](userimages/customs/44000/43502-1.jpg) Archangel Chibi Version X-Menby toymancustomsHere is our version of archangel chibi style. It is made from a luffy one piece figure. The head is sculpted , legs and arms are also sculpted. The wi...6 comments |
![[Archangel Garrus Vakarian - Mass Effect 2] Joker: "All right big guy. What do you call it when a turian gets killed by a horrible spiky monster."
Garrus: "Friendly fire."
So happy to have this finally done! Took the C.Viper body and sculpted every piece of armor on there.
Not only does this Archangel come with his Mantis Sniper Rifle, but I've also sculpted 3 heads in total and added a removable visor aswell as a Palaven themed base.](userimages/customs/43000/42748-1.jpg) Archangel Garrus Vakarian - Mass Effect 2 Mass Effectby VincentShawJoker: "All right big guy. What do you call it when a turian gets killed by a horrible spiky monster."
Garrus: "Friendly fire."
S...2 comments | ![[X-Force Archangel] Here goes my first submission.
I wanted an X-Force Archangel but the exclusive was really expensive and not to mention extremely rare, hence I made my own.
Added some more articulation, hinged neck joint so he can hit pretty good flight poses.
And I tried to keep his costume a bit simpler, I tried. :)
The sanding and paint curing in between coats took most of the time (that allowed me to go to work and do some chores).
Hope you guys enjoy it.
Marvel Universe Archangel Head, Legs, Feet & Hands
Marvel Universe Archangel Wings and Death Variant Wings
2-Pack Bullseye Torso and Arms](userimages/customs/41500/41472-1.jpg) X-Force Archangel |
![[Archangel, Xforce.] big fan of this character. made him grow, from some figure sculpted from scratch. made the estructure, and then.. this came to life and start a new proyect, and grow. u never know were the escupting is goona take u when u start a new piece. this is why, thanks for watching, the main man!!](userimages/customs/41000/40592-1.jpg) Archangel, Xforce. | ![[MU X-Force Archangel] And here's another MU :). Just gave him the buckle and then repainted. I did not follow the old lines on the fodder, but instead used the pattern he has in the comics (thanks for the comicbook JC!). Hope you like him. God bless!](userimages/customs/39500/39188-1.jpg) MU X-Force Archangel |
![[Archangel V2] Hi guys presenting my version 2 of archangel with the same interchangeable heads the long hair and death were casted from the original head sculpts and with the head gear which is a new sculpt,the interchangeable wings were reconstructed with the same measurements with the v1 wings thanks and good days!!!](userimages/customs/39000/38956-1.jpg) Archangel V2 Marvel Legendsby rexticonHi guys presenting my version 2 of archangel with the same interchangeable heads the long hair and death were casted from the original head sculpts an...9 comments | ![[X-Force ARCHANGEL] It was basically a repaint of the Archangel of Toy Biz. The new wings were made with plastic blister painted with silver paint and permanent marker.](userimages/customs/39000/38903-1.jpg) X-Force ARCHANGEL Marvel Legendsby Leo CustomsIt was basically a repaint of the Archangel of Toy Biz. The new wings were made with plastic blister painted with silver paint and permanent marker....9 comments |
![[Steampunk Archangel] Here is Archangel done in the world of SteamPunk!
Wingspan comes in at round 13/14 inches, Height: 13 inches on stand. Actual figure is 6 inches.
Archangel was made using Dr Dooms, Waist legs and arms, Punisher torso, and custom sculpted head.
Wing apparatus was created using various fodder bits and pieces. I dont know where the wings came from, but they are huge! The wings were given much more detail with pistons, gears and bolt heads. It was then given a metallic paint job, Copper, Steel, and bronze. And then weathered intensely.
Archangel attaches to the wings via magnets embedded into his back and the apparatus.
Figure comes with a custom made stand with a clear acrylic rod for support!](userimages/customs/39000/38786-1.jpg) Steampunk Archangel | ![[Archangel (X-Force)] I half finished a whole X-Force team just as I stopped making customs a couple of years ago so these were left unfinished for some time.
First up is Warren. He's the only one I used silver paints on as opposed to the codex grey because of the way his costume was portrayed. Removed the action feature from the wings and did a full repaint.](userimages/customs/39000/38542-1.jpg) Archangel (X-Force) Marvel Legendsby WingsI half finished a whole X-Force team just as I stopped making customs a couple of years ago so these were left unfinished for some time.
First up is ...6 comments |
![[Archangel] For Archangel I used DC toyman body, Steve Rogers head and some old archangel wings. thanks for looking.](userimages/customs/38500/38365-1.jpg) Archangel DC Superheroesby D2For Archangel I used DC toyman body, Steve Rogers head and some old archangel wings. thanks for looking....4 comments | ![[XMEN Archangel] Archangel base with a heman head swap that I hollowed out and then used spawn wings from a custom spawn I was working on](userimages/customs/37500/37007-1.jpg) XMEN Archangel |
![[Archangel] Finally! Have had this guy done for about a year but no wings. Thanks to BDCdiesel for sending me some wings.
Human Torch reworked with tubing and string for the details. DCD Flamebird wings and the rest is history.
Thanks for looking](userimages/customs/37000/36542-1.jpg) Archangel Marvel Legendsby Truwe 316Finally! Have had this guy done for about a year but no wings. Thanks to BDCdiesel for sending me some wings.
Human Torch reworked with tubing and ...5 comments | ![[Apocalypse and Archangel] I built Archangel from a bullseye and a GI Joe. Apocalypse was built from a Iron Monger. I thought that the X-Force version should have looked closer to his original suit but without the silly "A's".](userimages/customs/36500/36201-1.jpg) Apocalypse and Archangel |
![[Archangel] I made this a few months ago along with some of my other figures that I am finally getting around to adding. Archangel base. Added two sets of wings and a Warren Worthington III head. I gave the feathered wings articulation to go forward or backword. I also painted both of his metal wings to make them shinier! Check out my other X-Force figures. He looks really cool with the rest of the team!](userimages/customs/36500/36067-1.jpg) Archangel | ![[Archangel] Hey guys, made another of my favorite x-men.
This angel started as a doc sampson torso with steve rogers legs.
Wings are from a kids card game.
flying base is from Marvel Legends Showdown.
Thanks for checking him out.](userimages/customs/36000/35787-1.jpg) Archangel Marvel Universeby bzcustomsHey guys, made another of my favorite x-men.
This angel started as a doc sampson torso with steve rogers legs.
Wings are from a kids card game.
...3 comments |
![[Archangel 2.0] This is my second version of Archangel.
Figure base: Cyclops ML.
Head: Movie Punisher.
Wings: Manufactured. Painted Full Figure. ¡Thanks!](userimages/customs/36000/35727-1.jpg) Archangel 2.0 X-Menby jigsaw78This is my second version of Archangel.
Figure base: Cyclops ML.
Head: Movie Punisher.
Wings: Manufactured. Painted Full Figure. ¡Thanks!...4 comments | ![[Archangel (X-Force)] CC30 Entry:
I made the entire X-Force lineup, old and new, for Custom Con. I ended up shipping 8 of them to a customer already. Archangel is mostly a black spidy with 5inch archangel wings and Flamebird wings and of course sculpted details.](userimages/customs/36000/35556-1.jpg) Archangel (X-Force) Marvel Legendsby Jakey-JakeCC30 Entry:
I made the entire X-Force lineup, old and new, for Custom Con. I ended up shipping 8 of them to a customer already. Archangel is mostly ...3 comments |
![[Archangel] Hey guys, here's one of my Archangel experiments. Started with a Doc Sampson base, swapped in Steve rogers legs, used wings from some card / figure game from walmart.
Wings are immobile, but dang they leave an impression.
He's on a removable Marvel Legends Showdown Flying base.
I really like the traditional costumes of Angel rather than the stripey ones.
Thanks for checking him out.](userimages/customs/35500/35111-1.jpg) Archangel Marvel Universeby bzcustomsHey guys, here's one of my Archangel experiments. Started with a Doc Sampson base, swapped in Steve rogers legs, used wings from some card / figure ga...5 comments | ![[Red Lantern Archangel] Made this one for my friends birthday. Iceman head,black superman body,darknes hands,12inch archangel wings and some green stuff for details.](userimages/customs/35000/34988-1.jpg) Red Lantern Archangel D.C. Universeby drbannerMade this one for my friends birthday. Iceman head,black superman body,darknes hands,12inch archangel wings and some green stuff for details....4 comments |
![[X-Force Archangel] Marvel X-Force ArchAngel
-Highly Detailed Paintwork
-6 Inches Tall
Speedlee:
Had a blast with this one, turned out to be a lot better than I've expected :D
Recipe
-archangel
-punisher](userimages/customs/35000/34597-1.jpg) X-Force Archangel Marvelby speedleeMarvel X-Force ArchAngel
-Highly Detailed Paintwork
-6 Inches Tall
Speedlee:
Had a blast with this one, turned out to be a lot better than I've expe...17 comments | ![[Archangel] Hi guys good day,i present my custom archangel With three swap heads(original headsculpts)base from different versions of the character(as death,standard head gear,and with long hair)...and also i sculpted an interchangeable wings (close and spread winged),made from found objects that very near to the scale and sculpted over using a ruler as sculpting tool,i also added a slight modification for a slender buff using milliput...thanks](userimages/customs/35000/34559-1.jpg) Archangel Marvel Legendsby rexticonHi guys good day,i present my custom archangel With three swap heads(original headsculpts)base from different versions of the character(as death,stand...8 comments |
|