![[Azrael 2.0] I wanted to give him a more streamlined look so I used a smaller body. I think the Idea to use the Bullseye style body has been done before for Azrael, but I don't know who the credit goes to. A big shout out to Jin for the idea to use a Kamandi for the JPV head. They are held on by magnets and interchangeable.
Recipe
Body, legs and upper arms: ML Wally World Movie Cyclops.
Head, Lower Arms and cape pieces: DCU Azrael.
Cape: Darth Vader](userimages/customs/50000/49716-1.jpg) Azrael 2.0 Marvel Legendsby Delta TI wanted to give him a more streamlined look so I used a smaller body. I think the Idea to use the Bullseye style body has been done before for Azrael...6 comments | ![[Azrael Azbat Red 2.0] I wanna give a huge shout out to Darthsimbiont2099 and Category5Costoms. You guys had some great ideas that I incorporated into Both of my Azbat figures.
Recipe:
Body, legs & upper arms: DCU Azrael
Lower arms: DCU Azbat
Headss DCU Azbat Aquaman
Armor: DCU Azbat
Thanks for looking!](userimages/customs/50000/49651-1.jpg) Azrael Azbat Red 2.0 DC Universeby Delta TI wanna give a huge shout out to Darthsimbiont2099 and Category5Costoms. You guys had some great ideas that I incorporated into Both of my Azbat figur...1 comments |
![[Azrael Azbat Blue 2.0] I wanna give a huge shout out to Darthsimbiont2099 and Category5Costoms. You guys had some great ideas that I incorporated into Both of my Azbat figures.
Recipe:
Body, legs & upper arms: DCU Azrael
Lower arms: ML Mr Fantastic, DCD Azbat and DCU Azbat hands
Heads DCU / DCD Azbat
Armor and leg pouches: DCD Azbat
Cape DCU Batman
I repainted all of the blue parts with Testors acrylic Metallic blue and everything else was a combination of Citidel and Vallejo.
Thanks for looking!](userimages/customs/50000/49650-1.jpg) Azrael Azbat Blue 2.0 DC Universeby Delta TI wanna give a huge shout out to Darthsimbiont2099 and Category5Costoms. You guys had some great ideas that I incorporated into Both of my Azbat figur...2 comments | ![[Arkham City Azrael] Head / Legs: MK Jax
Torso: XMC Air Strike Wolverine
Arms: Assassin's Creed, FF Movie Mr Fantastic and fodder.
Hood: ML Moon knight
Cape: ML Mr. Sinister.
Armor: Assassin's Creed and LOTR Pieces.
The mask is sculpted and the bandages are pipe tape. He has interchangeable heads via magnets thanks to the tut that variablepenguin posted.
I want to give a big shout out to Fitzjedi, I drew a lot of inspiration from his AC Azrael. This custom has been on the back burner for about a year and has gone through a few incarnations before I was happy with him.
Thanks for looking, comments welcome!](userimages/customs/50000/49560-1.jpg) Arkham City Azrael Marvel Legendsby Delta THead / Legs: MK Jax
Torso: XMC Air Strike Wolverine
Arms: Assassin's Creed, FF Movie Mr Fantastic and fodder.
Hood: ML Moon knight
Cape: ML Mr. Sinist...7 comments |
![[Batman Azrael Artist Rendition] How was this custom designed? well it was not easy. the wings were really difficult. for them wings use a droid starfighter, head and arms were sculpted with epoxy. chest was sculpted putty pads and acetate. painting was made with alkyd enamel
How does custom fit the contest theme? I think it is an interesting figure. as this vision of azrael batman only appears in the comic. and I like the idea of having figures on the vision of the media have, which are only imaginary about such as superheroes. Interestingly serious direct dc mattel and devote a series based on the appearances of the heroes to look through as children or victims rescued.
Figure base. batman mattel
head and arms, sculpted with epoxy
backpack. of some gijoe
wings. wings of a droid starfighter
accessories. starwars](userimages/customs/49500/49428-1.jpg) Batman Azrael Artist Rendition DC Universeby To be revealed. . . How was this custom designed? well it was not easy. the wings were really difficult. for them wings use a droid starfighter, head and arms were sculpt...3 comments | ![[Azrael and Bane Prototypes Repaint] Hey guys just sharing alittle fixing I did. I bought thse prototypes on-line for really cheap, compared with the price these factory figs go these days.They were casted in the right colors and were missing some paint detail only. On Azrael, I drybrushed old gold on gauntlets, shoulder and chest, painted medal and stripe on cowl, mask detail, eyes and flames on gauntlets. On Bane, the work was minimum. The skin parts were already airbrushed, except for the left arm, which I got from a FB trade page. So I just painted the mask, zipper on his head and belt buckle. Really happy with them, and above all with the money I saved, specially on Bane. But since Bane took so little work done, I submitted both on a single entry.
Thanks for looking](userimages/customs/46500/46041-1.jpg) Azrael and Bane Prototypes Repaint D.C. Universeby ringomendozaHey guys just sharing alittle fixing I did. I bought thse prototypes on-line for really cheap, compared with the price these factory figs go these day...10 comments |
![[Batman Knightfall (Azrael)] Still could not figure DC Direct Batman Knightfall so I gave myself the task of making the custom.
Use the body of Azrael, Killer Moth's head sculpted in clay epoxy.
The coat, gloves DCSH Batman. The belts also are molded in epoxy and painted with acrylic paint.](userimages/customs/46000/45746-1.jpg) Batman Knightfall (Azrael) D.C. Universeby darthsimbiot2099Still could not figure DC Direct Batman Knightfall so I gave myself the task of making the custom.
Use the body of Azrael, Killer Moth's head sculpted...4 comments | ![[Azrael] My computer has broke so ive forgot to upload anything on the realm.
It's all been on Instagram. @jonnyvu
Ill take better pictures when the time comes but...
Wanted a better articulated Azrael so I put it on a Dcuc body.
Hope y'all like it!](userimages/customs/44500/44270-1.jpg) Azrael DC Universeby JonnyVuMy computer has broke so ive forgot to upload anything on the realm.
It's all been on Instagram. @jonnyvu
Ill take better pictures when the time com...4 comments |
![[Azrael No Man's Land Costume] Another painful custom character. It took me more than 2 years to complete this figure, only worked on it if I' was in a good mood. I used a Dr.Impossible head, re-sculpted the face&the hair.The body is from a Black solar suit superman, re-culpt the whole body,especially the hands, shoulders, belt, and boots.The cape is from Dr.Strange cape, remodeled the whole cape...hope you guys like it...](userimages/customs/43500/43485-1.jpg) Azrael No Man's Land Costume DC Universeby fujimiya.gokunagaAnother painful custom character. It took me more than 2 years to complete this figure, only worked on it if I' was in a good mood. I used a Dr.Imposs...5 comments | ![[Warrior Angel Azrael] This warrior angel was made at the suggestion of my wife.
I started with a DCUC Azrael Batman.
I swapped the head for a Steve Rogers head.
For the wings, I removed the pieces from the Azrael Batman cape and then re-assembled them into what you see here.
I re-sculpted the shoulder pads, and sculpted over the bat chest symbol.
Then I gave a full repaint.
Gold for the wings with a white body suit, complimented by red and pearl blue accents.
I have yet to come up with a name.
I think he will fit into my angelic collection surprisingly well, but let me know what you think.
I look forward to your comments.
Thanks for looking, and God bless.](userimages/customs/43500/43299-1.jpg) Warrior Angel Azrael My Heroesby EmmettThis warrior angel was made at the suggestion of my wife.
I started with a DCUC Azrael Batman.
I swapped the head for a Steve Rogers head.
For the win...14 comments |
![[What if...John Blake/Azrael the Dark Knight Rises] This is the 6th figure in my What if…John Blake concepts “Chalk” series (I really like the character). I imagined what Det. John Blake would do with everything that Bruce Wayne gave him. Blake has all of Batman’s resources, but none of his money so he I didn’t think he would retool the costume much. Instead, I think he would walk up to it and slap on the white chalk bat/bird that he drew all over Gotham, right on the chest. In this case Blake begins his training with the search for the Sword and Armor of St. Dumas, and takes the mantel of Azrael and goes after Bane.
Weather you want to admit it or not, those of us who knew the Knightfall story, for just a moment when Bruce is taken out by Bane and we didn’t know who John Blake was going to turn out to be, we thought there might be a chance that Blake could be some version of Azrael and take out Bane like he did in the comics. Wishful thinking?
He was a DKR Batman with a Robin head and hood cape.
E](userimages/customs/43500/43265-1.jpg) What if...John Blake/Azrael the Dark Knight Rises | ![[Azrael] I'm finally back posting on the realm! I wanted to do my own version of this guy, taking inspiration from many sources.
Azrael is made up of: Lord of The Rings body, ML Ronin head, random cloth cape,DC Azrael cape bits fodder swords and sculpey. Add some paint and sealer and here ya go! Comments welcome! Thanks for looking](userimages/customs/43000/42578-1.jpg) Azrael D.C. Universeby louddarrylI'm finally back posting on the realm! I wanted to do my own version of this guy, taking inspiration from many sources.
Azrael is made up of: Lord of...1 comments |
![[1:18/3.75" DC Comics' Azrael] This was a fun project, as the Jean-Paul Valley character is one of my favorites. This was made from a Marvel Universe comic pack Daredevil body with an MU Black Panther head and GI Joe Resolute Zartan hood. The inner cape is from an MU Moon Knight while the outer/top cape was created from sheet styrene. The gauntlets are from a Storm Shadow and the gloves from a UFC figure.](userimages/customs/42500/42459-1.jpg) 1:18/3.75" DC Comics' Azrael Batmanby starwarsgeekThis was a fun project, as the Jean-Paul Valley character is one of my favorites. This was made from a Marvel Universe comic pack Daredevil body with ...10 comments | ![[Azrael] While I was really hoping Azrael would appear to fight Bane in the Dark Knight Rises film it never happened...but that doesn't mean he can't have a figure! Here's a movie-style custom of Azrael in a design I figured might play into the ninja-ish League of Shadows theme. He was made from a Marvel legends Hand Ninja, DC Universe Azrael spine cowl, some cape, and lower hands from a RediKai figure. His flaming blades can be removed and replaced with taser whips or the Spear of Destiny passed down through the Order of Saint Dumas.](userimages/customs/42000/41760-1.jpg) Azrael Movie Mastersby Jin SaotomeWhile I was really hoping Azrael would appear to fight Bane in the Dark Knight Rises film it never happened...but that doesn't mean he can't have a fi...9 comments |
![[Arkham City Azrael] Hello,
So I wanted to do this Azrael for a minute, but was in the process of doing so many other things. In any case, I put an extra DCUC Sinestro head onto the Boromir body, so as to save Boromir's head for something else, and then sculpted Azrael's mask over it. I sculpted his left shoulder pad and used cut up pieces of another LOTR figure's armour for the right side armour plates. His leg pouches are from some Marvel figure belt, and his knee pads are from a Dark Knight Movie Master Batman's shoulder armor, with sculpt to smooth it out and hold it.
His left arm blades are from an Ultimate Wolverine's claw, and some sculpte to make it fit into the armor style. On his right forearm are three blades that protrude from the back of the guantlet. He has a cloth, custom shaped hood-which is removable to reaveal a smooth armoured head/mask, a cloth strap cape, and cloth robes over his chest armor with the Templar cross painted in a 'faded' fashion. The sword, sheath, and straps are all f](userimages/customs/42000/41584-1.jpg) Arkham City Azrael Marvel Legendsby fitzjediHello,
So I wanted to do this Azrael for a minute, but was in the process of doing so many other things. In any case, I put an extra DCUC Sinestro he...12 comments | ![[Jean Paul Valley | Azrael] well im not a fan of the character
don't get why bats would make him bats when he is a nobody
it would have fallen to grayson at that time like it eventually did
just like terry mcgiuness? wtf?
anyway
don't like him but as im expanding my batman display and enemies i had to do him
was gonna just get the dcuc one and have it on display
but i saw some people (jin saotome and redmist )
so i thought to use the knightfall costume and hybrid with azrael proppa costume
painted a spare mm tdkr fig red
gave him some halo figure arms and iron man 2 hands
plack panther head
some cape
lot of red in this and some gold
head is black panther with an azrael pattern but not black mouth its golden
thanks for viewing](userimages/customs/41000/40989-1.jpg) Jean Paul Valley | Azrael Batmanby Chester001well im not a fan of the character
don't get why bats would make him bats when he is a nobody
it would have fallen to grayson at that time like it eve...0 comments |
![[Azrael Batman Jean-Paul Valley Unmasked] This is another very simple head swap.
Simply swapped out a Dcu Aquaman head with the original helmet head. I thought he looked just like Jean-Paul Valley. Simple as they they come, but I think it was effective. Thanks for looking.](userimages/customs/38500/38010-1.jpg) Azrael Batman Jean-Paul Valley Unmasked Batmanby category5customsThis is another very simple head swap.
Simply swapped out a Dcu Aquaman head with the original helmet head. I thought he looked just like Jean-Paul Va...5 comments | ![[Azrael Batman] Azrael Batman: I completed this figure a few months back but never got the chance to upload the pics to the Realm. The figure is made up of a mess of different pieces. The torso and upper legs are from the DCUC Azrael. The gloves, lower legs and cowl are from the Legends of the Dark Knight Azrael Batman and the head is a DCSH Batman head with the mouth sculpted over (first time doing that, turned out pretty clean.) and all of it was then painted. I went through my cape box and didn't like what I was coming up with and I really liked the look of the Dark Victory/Long Halloween batman's cape. So I ripped it off that figure and stuck it on this figure to complete it with the cape look instead of the "wings". Hope you like it. Got more coming.](userimages/customs/38000/37960-1.jpg) Azrael Batman Batmanby 10over6Azrael Batman: I completed this figure a few months back but never got the chance to upload the pics to the Realm. The figure is made up of a mess of ...8 comments |
![[Azrael] Looking at my Azrael figure, I decided he needed a makeover to give him the ability to look straight ahead & lost the spagetti legs too. He is made from a DCU AzBats, with DCSH Azrael arms, head,& cape. I had to dremmel the shoulder sockets out to get his monster shoulders to fit in the Azbats body, and also sculpted the belt as well. I was gonna do an unmasked head, but were his cape is so thick, the head would not sit properly on his neck. This was also my first time using lacquer paint for the gold on his armor. Really pleased with how he turned out!
~JIM](userimages/customs/38000/37620-1.jpg) Azrael DC Universeby horton'sheroesLooking at my Azrael figure, I decided he needed a makeover to give him the ability to look straight ahead & lost the spagetti legs too. He is ma...12 comments | ![[Azrael (Knightsend)] In lieu of next summer’s The Dark Knight Rises I revisited the nice Knightfall TPBs that I got a while back. This time I read the entire story from Batman’s fall to Bane’s rise, and Banes fall to Azrael’s rise, to Azrael’s fall to Batman’s rise…again, or something like that. Awesome story!
SPOILERS AHEAD! (I know my brother hasn’t read it yet)
So after reading how could I resist making another Azrael custom, this time modeled after his appearance at the end of the story when in order to keep up with Batman he has to strip down to nothing but his pants, t-shirt, and helmet. Barry Kitson made Azrael look amazing, and I had to go for it. For a character that has repeatedly had THE best costume designs in the business he sure doesn’t get much love from DC.
So here is Knightsend Azrael, or as I like to call him, “Angry Azrael.”
He’s a DCUC Az-Bats lower and Helmet, DCUC Aquaman upper, someone’s fists, and a c](userimages/customs/35000/34991-1.jpg) Azrael (Knightsend) DC Universeby ACCustomFiguresIn lieu of next summer’s The Dark Knight Rises I revisited the nice Knightfall TPBs that I got a while back. This time I read the entire story f...7 comments |
![[Azrael Batman] Just want to convert one of my favorite DC character into a machine-robot like warrior. so I decide to pull Gundam Parts and have them repainted and sculpted the head.. Hope you liked it..](userimages/customs/35000/34641-1.jpg) Azrael Batman DC Superheroesby DR.EVILJust want to convert one of my favorite DC character into a machine-robot like warrior. so I decide to pull Gundam Parts and have them repainted and s...10 comments | ![[Azrael Batman] Original Azrael Batman Figure
Personalized and based on the comics, with unique details of its kind, with improvements in appearance](userimages/customs/35000/34594-1.jpg) Azrael Batman DC Universeby chief34Original Azrael Batman Figure
Personalized and based on the comics, with unique details of its kind, with improvements in appearance...6 comments |
![[Azrael Batman] I did not like the way they put together this figure. I removed the wings on back and added a cape from another Batman figure. Gave him a new chest section and added armor. Customized the head for better possibility. Hope you like it.](userimages/customs/34500/34479-1.jpg) Azrael Batman DC Universeby HappyDayCustomsI did not like the way they put together this figure. I removed the wings on back and added a cape from another Batman figure. Gave him a new chest ...6 comments | ![[Azrael] Azrael
head-iron man
body-assassin s creed
hands-some japanese toy,maybe a pokemon
shoulder armour-LOTR
sword-LOTR
back stripes-mr sinister
cape-zorro
painted the head
swaped the hands
like this religious variation of azrael](userimages/customs/34000/33587-1.jpg) Azrael Marvel Knightsby megatrooperAzrael
head-iron man
body-assassin s creed
hands-some japanese toy,maybe a pokemon
shoulder armour-LOTR
sword-LOTR
back stripes-mr sinister
cape-zorr...6 comments |
![[Batman Azrael] MU Gladiator & Black Panther Head
Sculpted top base,applied cape to base,sculpted chest guard,waist & leg belt
also sculpted claws and forarm guard.](userimages/customs/32000/31653-1.jpg) Batman Azrael | ![[Azrael Batman RED] Pretty basic... was kind of a bi#ch to repaint.. especially in between the spikes in the back.. but I got it done =P thanks for looking! hope you guys like it](userimages/customs/28500/28410-1.jpg) Azrael Batman RED DC Superheroesby wyLunPretty basic... was kind of a bi#ch to repaint.. especially in between the spikes in the back.. but I got it done =P thanks for looking! hope you guy...5 comments |
![[DC Universe Azrael Batman] Hey guys, just alittle small touch up on this figure.. Liked this figure a lot.. But I liked the version that fought bane better.. With the cape and what not...
Removed the spikes and added the cape. Nothing big... I'm currently making a red version of the azrael batman.. Which will be much more fun to look at =p](userimages/customs/28500/28043-1.jpg) DC Universe Azrael Batman D.C. Universeby wyLunHey guys, just alittle small touch up on this figure.. Liked this figure a lot.. But I liked the version that fought bane better.. With the cape and w...4 comments | ![[Knightfall Azrael/Jean-Paul Valley] The DC Universe Knightfall Batman (well, Azbats) from the Bane Wave is a really cool figure. But I absolutely loved his red armor and decided to fix the basic blue one up. First thing was to make the entire cowl sit lower on the body so I had to dremel the shoulders/pegs/underside of the cowl down. Then parts of the shoulder armor were removed to add more range of motion. Same was done for the elbows.
Once I had him painted and back together I made him a Jean-Paul Valley head using Kamandi's head, shortening the hair considerable, adding sculpted glasses complete with comic style shading, and a new double-ball jointed neck. Now he can have either look!](userimages/customs/28000/27919-1.jpg) Knightfall Azrael/Jean-Paul Valley Batmanby Jin SaotomeThe DC Universe Knightfall Batman (well, Azbats) from the Bane Wave is a really cool figure. But I absolutely loved his red armor and decided to fix t...7 comments |
![[Azrael Batman] This is my first custom that I made just over a year ago, his whole chestpiece was sculpted same with his leg strap and mouth area, his hands were also replaced with hands that grip, he ended up being sold to a U.S Marine....
base figure is a DCSH Azrael w/sculpting & fodder](userimages/customs/26500/26438-1.jpg) Azrael Batman DC Superheroesby 3bcustomsThis is my first custom that I made just over a year ago, his whole chestpiece was sculpted same with his leg strap and mouth area, his hands were als...1 comments | ![[Knightfall Azrael Batman (Azbats)] Well I had been working on this one since summer. I bought a pile of "The Batman" toys and I noticed Kryptonite Claw Batman looked a lot like Azbats. I found the Crimson patrol Batman on the Realms tore, bought it, and a few days later here I am. I hate the fact that it used soft plastic, because Ihad to use my crappy acrylics, which made the paint look a bit choppy and gross. But I still like it.
Base - Kryptonite Claw Batman
Head/shoulder armor, wings - Crimson Patrol Batman](userimages/customs/22000/21583-1.jpg) Knightfall Azrael Batman (Azbats) Batmanby AzraelWell I had been working on this one since summer. I bought a pile of "The Batman" toys and I noticed Kryptonite Claw Batman looked a lot lik...2 comments |
|