![[Barricade (Version 3 Remake)] Barricade is the next character I re-imagined for my "Wreckers" squad. Barricade is the body armored bunker buster of the Joe team. I used numerous pieces from armored GI Joe figures. His upper body is Retaliation Dukes, the arms of Rise of Cobra Flash, the thighs of an unknown rise of cobra figure, and the Helmet an lower legs of the much maligned Accelerator suit. Initially I was going to go with his original blue and gold armor look, but after check his other versions, his third figure worked far better as far as realism goes!](userimages/customs/49000/48616-1.jpg) Barricade (Version 3 Remake) G.I. Joeby GDXBarricade is the next character I re-imagined for my "Wreckers" squad. Barricade is the body armored bunker buster of the Joe team. I used...2 comments | ![[Barricade] Just another simple head swap.
Head - 25th Lift Ticket
Whole figure & helmet - Roc Speed Metal
Thanks for looking.](userimages/customs/35500/35165-1.jpg) Barricade |
![[Battle Damaged Barricade] Battle damaged barricade. just me and my knife, paint a lighter and and sculpting tools to make ol' barry here a junkyard machine.](userimages/customs/29500/29186-1.jpg) Battle Damaged Barricade | ![[Human Alliance Barricade] This is a repaint version of Human Alliance Barricade. My good friend future_trunks is responsible for the lighting of this figure and I did the painting of it. I am still a novice at the lights so, I has ecstatic when I received this as a Bday gift. The painting was consisted of gloss black with silver, brass and copper. Hope you all enjoy it.](userimages/customs/20500/20236-1.jpg) Human Alliance Barricade |
![[1:25 Scale Transformers Movie Barricade] 1:25th scale transformers movie barricade figure. I used bionicle pieces for the skeleton and a revell mustang gt model kit for the robot parts. The kit was cut up into hundreds of individual pieces. The hands and head are scratch built using styrene, a little sculpting and other bits. I had custom decals created by reprolabels and they did a great job.
He stands just under 9 inches tall and has working police lights in his chest. The chest is detachable for access to the power switch and batteries. He has 15 points of articulation.
I had a lot of fun working on this guy. Took several months to complete.
Thanks for taking a look and for any comments you might like to share.](userimages/customs/19500/19209-1.jpg) 1:25 Scale Transformers Movie Barricade | ![[Battle Damaged Barricade] Here is Barricade after his first encounter with Bumblebee. Although we thought he died after their battle, we saw him again together with the other Decepticons during the early stages of the final battle with the Autobots. Barricade is depicted in a Battle Damaged mode. Highly detailed with rusted and faded parts, broken glass and chipped paints. His left eye is also destroyed with some parts already missing like one of his fingers and side mirror. Truly, a high detailed depiction of Barricade after bravely standing his ground against Sam's guardian.](userimages/customs/10000/9537-1.jpg) Battle Damaged Barricade Transformers - Movieby dtorch3Here is Barricade after his first encounter with Bumblebee. Although we thought he died after their battle, we saw him again together with the other D...6 comments |
![[Barricade] "DECEPTICON BARRICADE" from the Transformers Deluxe Class line. Barricade was made with an exceptional level of detail. The inner body has a metal dry brush with a lot of detail. The tires, rotors and lug nuts were painted to give it more of a real look from the movie. Also added was the missing 911, 634 and license plate decals and working strobe lights (yes the roof lights realy work)to give it that added touch as he was in the blockbuster movie. The painting is done using some of the best paint's available with some airbrushing as well. The parts and accessories are from existing Transformers figures. Nothing noone else has already done but I think it is worth looking at.](userimages/customs/7000/6729-1.jpg) Barricade | ![[Alternators Barricade] I hadn't seen any Alternator customs based on the new TF movie, and since Barricade was my favorite movie character and since I had a knock-off, I thought I'd give it a crack. The Grimlock knock off had a unique head mold, which I tried to paint to loosely represent the movie character, with gold mouth, red eyes, and silver accents.
After complete disassembly, the body was air brush painted with acrylic black gloss and flat white for the doors. Seats and a few other accents were painted in dark gray, wheels painted flat back, and the fog lamps painted gold. Police letter stickers, car numbers, and the decepticon badges on the front fenders came from the Takara Masterpiece Starscream sticker sheet. Gold decepticon shoulder badges are from ReproLabels. All new paint was clear coated after sticker application.
Light bar came from a snap together Chevy Impala police car model, and the ramming bar was fabricated from various round plastic bits that held the Chevy model's twist-off pie](userimages/customs/5000/4705-1.jpg) Alternators Barricade |
![[Recon Barricade] Standard Recon barricade from the new assortment, equipped with flashing lights. repainted with 7 Metallic paint and 4 regular paints! This is Barricade as a private security car.](userimages/customs/4000/3991-1.jpg) Recon Barricade Transformersby Mikey11935Standard Recon barricade from the new assortment, equipped with flashing lights. repainted with 7 Metallic paint and 4 regular paints! This is Barrica...0 comments | ![[Transformers Movie Barricade Figure] Used Jin's recipe for the flashing lights and repainted the robot mode figure.](userimages/customs/4000/3893-1.jpg) Transformers Movie Barricade Figure |
![[Barricade] Basically like my first Barricade custom, this one has the flashing lights, decals, drybrushed metal parts and detailing. The main difference is that I used the head and hands from the Robot Replicas Barricade which in my opinion are superior to the ones he comes with. His head had a ball-joint in it so I didn't have to swipe one and the hands basically plug into where the thum would be once I removed it and the fingers inside the shell. One bladewheel attachment later and Barricade V2 was ready to roll! I also gave Frenzy and updated paint job with golden details like his movie counterpart had.](userimages/customs/4000/3796-1.jpg) Barricade Transformersby Jin SaotomeBasically like my first Barricade custom, this one has the flashing lights, decals, drybrushed metal parts and detailing. The main difference is that ...5 comments | ![[Transformers Movie Barricade (Repaint)] I'm back with another repaint.
this time, the favorite villain in the TF movie, BARRICADE!
we all know hasbro sucks on adding detailed paints on their figure... so I did repaint the black portions again as what I did to my previous repaint, BUMBLEBEE. I also repainted FRENZY.](userimages/customs/3500/3178-1.jpg) Transformers Movie Barricade (Repaint) Transformersby rateegI'm back with another repaint.
this time, the favorite villain in the TF movie, BARRICADE!
we all know hasbro sucks on adding detailed paints on their...6 comments |
|