![[TMNT Robin (Batman Animated Series)] TMNT + Robin color scheme](userimages/customs/50000/49845-1.jpg) TMNT Robin (Batman Animated Series) | ![[WWI Batman] I really enjoy coming up with new Batman figures and after making the WWI Captain America this one was a no brainer.](userimages/customs/50000/49823-1.jpg) WWI Batman Batmanby gijoeyI really enjoy coming up with new Batman figures and after making the WWI Captain America this one was a no brainer....3 comments |
![[Batman beyond Proto Suit] Like others here I got the bug to see an early version of the Beyond suit. When I got home with the new Injustice figure it screamed to be transformed.
This was just a repaint but I tried to go all out. I painted all the metallic pink areas black and used armor ink to high light the blued areas, not sure if it shows up in pics. Added the red and did a red ink wash on those to. I like the New God/Apocalypse look of the 'circuitry' commonly seen with the Beyond Suit](userimages/customs/50000/49796-1.jpg) Batman beyond Proto Suit Batmanby To be revealed. . . Like others here I got the bug to see an early version of the Beyond suit. When I got home with the new Injustice figure it screamed to be transformed...2 comments | ![[Batman TDKR Armour] Good day guys! Here's Batman in his Frank Miller armour!
My brother Jeff gave me the comicbook and I was instantly hooked by the story-telling and amazing art.
This figure was made from the DCDirect TDKR fig (see pics). The one with limited articulation. Listed below are the detailed steps in making this custom...
- Chop head & legs and reposition to achieve a more neutral pose
- Sculpt helmet, belt, arms, legs... basically everything that's not on the base fig
- Sonic gun... made from various pieces and sculpt
- Get TDKR lamp post. Attach wires and put a peg that plugs onto Bruce's utility belt
- Paint with the usual matte-mettalic-semimetallic-combo
Now Bruce is ready to charge his suit, wield his gun and wait until Supes arrives. And then he'll proceed to kick his Kryptonian @$$ like in the story :D.
Hope you like him guys! God bless.](userimages/customs/50000/49781-1.jpg) Batman TDKR Armour DC Directby To be revealed. . . Good day guys! Here's Batman in his Frank Miller armour!
My brother Jeff gave me the comicbook and I was instantly hooked by the story-telling and ama...18 comments |
![[I CAUGHT a BAT Dio - Poison Ivy (a.F.) X Batman (] Poison ivy is made from a mattel nikki bella. I removed her clothing and made her a new one using epoxy.
Bats stat dio is made from a black hand figure. I bought him cheap cause this one is missing lower part of a leg (left). And his face is kinda look like his on a struggle. That gave me an idea to just use it for a dio so i made it looked like one leg is stuck on the vines.
Vine trap on the back of the stat is made from a wafer stick container, epoxy and some fake plastic leaves.
Ive been wanted to make this kind of dio since i saw one of fabok’s art work of ivy trapped batman with some kind of plants and vines. I just added my own part of art and style.](userimages/customs/50000/49778-1.jpg) I CAUGHT a BAT Dio - Poison Ivy (a.F.) X Batman ( D.C. Universeby To be revealed. . . Poison ivy is made from a mattel nikki bella. I removed her clothing and made her a new one using epoxy.
Bats stat dio is made from a black hand figu...6 comments | ![[Batman beyond 2.0] I was super unhappy with my original Batman Beyond custom and I wanted to give him an update. I saw the ROML Constrictor arms and thought they would make perfect batarang launchers. Anyway, I am super happy with the way he came out, I keep him on my desk and think "Man I did a good job" lol. So anyway.
Recipe:
Body, & legs: ML Wally World movie Cyclops.
Arms: ML Constrictor
Heads: Both from DCU, interchangeable via magnets.
Jet thrusters (Not pictured) are from the old Kenner BB and are cut to fit in the holes in his feet.
I sculpted the bat symbol. It isn't perfectly symmetrical the pieces from the belt and all accessories are from the DCU Batman Beyond. I painted him up with some Vallejo glossy black and off we go.
I need to give him some wings but I am stumped. I was thinking maybe some red foam board but I am open to suggestions.
Thanks for looking,comments always welcome :)](userimages/customs/50000/49741-1.jpg) Batman beyond 2.0 Batman Beyondby Delta TI was super unhappy with my original Batman Beyond custom and I wanted to give him an update. I saw the ROML Constrictor arms and thought they would m...9 comments |
![[Batman Incorporated Figure] Hello all,
This was a simple swap of body parts and a repaint. I swapped out the dc direct batman inc. head, cape, legs from knee cap to the bottom of boot, and the arm from elbow to the hand and replaced it with a Marvel Legends Drax figure. I painted the figure with a regular acrylic Grey. After the paint dried I Proceeded to draw the distinctive lines and seams from the suit that is used in batman inc. pre New 52 comics. I then removed the Batman emblem from the figure along with his belt and placed them in the proper places.](userimages/customs/50000/49717-1.jpg) Batman Incorporated Figure | ![[Batman] well my original i wasn't happy with as he looked to bulky.. that was a hush head and arkham body...
with second wasn't happy with adding arkham forearms to a dcsh bats and hush head...
with this i got an arkham figure (dcuc) and cracked it, files down under armpitts of torso with dremmel... then painted "paints" grey.
gave him a painted cast i got off nuffsaid of the dc direct dcnu52 batman head (jim lee style)
sanded down gauntlets from arkham city ones into arkham asylum ones..
added dark knight fins to each (might have been batman begins, but either way i love the shape)
repaint.. minor edit to cape to make it more "in" on sides... bout it
thanks for viewing](userimages/customs/50000/49708-1.jpg) Batman Batmanby Chester001well my original i wasn't happy with as he looked to bulky.. that was a hush head and arkham body...
with second wasn't happy with adding arkham forea...3 comments |
![[Batman beyond] Woa, what? a figure outside of Spider-Man? That's right! I got this guy a while ago for pretty cheap and recently felt the urge to give him a batman head because I had the one with the Terry head. So I grabbed a spare Batman head and did the usual magnet thing and painted his head pretty simple but effective. I also carved some wings out of cardboard and painted them and attached them with the invisible rubber bands he came with.](userimages/customs/50000/49699-1.jpg) Batman beyond Batman Beyondby BluehawKWoa, what? a figure outside of Spider-Man? That's right! I got this guy a while ago for pretty cheap and recently felt the urge to give him a batman h...2 comments | ![[Dick Grayson Robin as Batman (Arkham Style)] If you have read the "Flashpoint" comic series you know that Darkseid (allegedly) kills Batman. Dick Grayson has already been off on his own as Nightwing for a while at this point, but feels it is his duty to become the next Batman. I thought this concept was pretty awesome and have not seen anyone do this figure yet so I made it. I may have botched the story a little bit (sorry about that) and if you want to know if Batman is dead you will have to read the comic, I won't spoil that.
As you can see this was a relatively simple custom. I used a DCU Batman Body, DCU Nightwing head and customized Batman's hands so he can hold the escrima sticks.](userimages/customs/50000/49684-1.jpg) Dick Grayson Robin as Batman (Arkham Style) Batmanby AFCustomIf you have read the "Flashpoint" comic series you know that Darkseid (allegedly) kills Batman. Dick Grayson has already been off on his own...1 comments |
![[Damien Wayne as Batman] This is Batman as he appeared in Batman #666 when Damian took over the mantle. He is made from the ML WW2 ultimate Cap and the ROML Ultimate Cap. His collar is from ML vengeance and the head is a cast of the DCD Nu52 Batman. The lower part of the trench coat is cloth so it wouldn't hinder the articulation.](userimages/customs/50000/49675-1.jpg) Damien Wayne as Batman Marvel Legendsby lestat12This is Batman as he appeared in Batman #666 when Damian took over the mantle. He is made from the ML WW2 ultimate Cap and the ROML Ultimate Cap. His ...8 comments | ![[Arkham City Batman] Happy Mother's Day! Wanted to post something today that my mother actually worked on, haha. Somehow I convinced her to stitch this cape I had made when visiting over the weekend, and she Actually Did! So, thanks Jenna for the help!
Liked everything about the new Play Arts Batman AC other than the cape and head. So, I made a fabric cape, swapped the head for the PA AA Batman, and ta da! I really love this sculpt, and I think the fabric cape turned out well. Hope you like it! Thanks for looking and ENJOY!](userimages/customs/50000/49661-1.jpg) Arkham City Batman Batmanby HayesHappy Mother's Day! Wanted to post something today that my mother actually worked on, haha. Somehow I convinced her to stitch this cape I had made w...8 comments |
![[Michael Keaton Batman] I've been working on this one off and on for a while now. He is essentially made from an LCBH wraarrl, a hydro shrunk Batman head, some parts from a DCD Batman Inc, and a lot of sculpting.](userimages/customs/50000/49656-1.jpg) Michael Keaton Batman Marvel Legendsby lestat12I've been working on this one off and on for a while now. He is essentially made from an LCBH wraarrl, a hydro shrunk Batman head, some parts from a D...13 comments | ![[Dc Jsa Liberty Files Batman Elseworlds] This is my custom JSA ELSEWORLDS BATMAN. He was made using a wwe mattel 8 inch undertaker combined with a jsa liberty files elseworlds Batman. Okay the original figure was terrible, it looked like a short out of shape batman that had no mobility that looked like he was ready to pop a squat. I went with the undertaker for the size that jsa batman needed to go with the parts I used. I sculpted the chest outfit, and the rest after that was pretty easy. I also made the goggles removeable. The original figure had them glued to his face. I hope you all like, and as always comments are welcomed. Thanks for looking, and God bless!
Your customizing pal, Mando](userimages/customs/50000/49581-1.jpg) Dc Jsa Liberty Files Batman Elseworlds DC Directby GOLIATH_CUSTOMSThis is my custom JSA ELSEWORLDS BATMAN. He was made using a wwe mattel 8 inch undertaker combined with a jsa liberty files elseworlds Batman. Okay th...10 comments |
![[Batman the Dark Knight V.2] This is version 2 of my batman that ive customized he now has DCMM shoulder pads and utility belt from the dark knight rises bale action figure i am also making a custom mask to fit his head as well :D hope you all enjoy.](userimages/customs/50000/49537-1.jpg) Batman the Dark Knight V.2 | ![[Batman] i took an made a unmasked version of batman. i had taken chris redfields head sculpt from re5 and changed out batmans head was a little difficult due to ball joint on chris's head being bigger than batmans neck hole.](userimages/customs/50000/49536-1.jpg) Batman D.C. Universeby abemontalvo55i took an made a unmasked version of batman. i had taken chris redfields head sculpt from re5 and changed out batmans head was a little difficult due ...3 comments |
![[Batman the Dark Knight Returns] I'm more a Marvel boy than a DC guy but I do like Batman and The Dark Knight Returns is one of my favorite comic-books. One day, looking at the Wrecker figure my wife gave me as a gift for father's day, I've been thinking it might be a good base for a DKR custom. Searching the realm, I found out it had been done at least one time but, hey, I had to to try to get mine anyway...
Sand off the torso and belly, modified gloves with added spikes, modified the head and the boots, sculpted the utility belt and the cape (thin plastic base and papier maché). Lots of painting and repainting to get things right (or almost).
Now I have a Dark Knight standing proudly on my shelves !](userimages/customs/49500/49486-1.jpg) Batman the Dark Knight Returns Marvel Universeby daredeviantI'm more a Marvel boy than a DC guy but I do like Batman and The Dark Knight Returns is one of my favorite comic-books. One day, looking at the Wrecke...3 comments | ![[Dc Universe Custom Batman beyond] Well welcome to another one of my customs. Dc universe batman beyond I didn't like the one they did I always thought he was to big. I remember watching the old cartoon and I remember him being smaller guy. So I went ahead grabbed aqua lad . I wanted to give him some removable wings. So not else much said. The legs are from that terrible robin young justice. Well any comments are welcome](userimages/customs/49500/49470-1.jpg) Dc Universe Custom Batman beyond D.C. Universeby 1andonly5711Well welcome to another one of my customs. Dc universe batman beyond I didn't like the one they did I always thought he was to big. I remember watchin...18 comments |
![[Batman Azrael Artist Rendition] How was this custom designed? well it was not easy. the wings were really difficult. for them wings use a droid starfighter, head and arms were sculpted with epoxy. chest was sculpted putty pads and acetate. painting was made with alkyd enamel
How does custom fit the contest theme? I think it is an interesting figure. as this vision of azrael batman only appears in the comic. and I like the idea of having figures on the vision of the media have, which are only imaginary about such as superheroes. Interestingly serious direct dc mattel and devote a series based on the appearances of the heroes to look through as children or victims rescued.
Figure base. batman mattel
head and arms, sculpted with epoxy
backpack. of some gijoe
wings. wings of a droid starfighter
accessories. starwars](userimages/customs/49500/49428-1.jpg) Batman Azrael Artist Rendition DC Universeby To be revealed. . . How was this custom designed? well it was not easy. the wings were really difficult. for them wings use a droid starfighter, head and arms were sculpt...2 comments | ![[DC Injustice Insurgency Batman] Hey there my friends!!
So today is some more Injustice. First off, Insurgency Batman. I love the way this guy looks in the game, armored up with lots of non-smooth fitting, almost piece-meal gear, and looking beat to heck. Very cool concept of the darker world's Dark Knight. Knew I had to tackle him.
So first I chopped off the plastic cape--if you know me by now, that's just not gonna stay!-LOL! Next I had to sculpt his chest armor and then sculpted that bat symbol on top of that. The armor isn't seemless, it's more like plates that are matched. More like samurai plate armor than an anime style. I also sculpted his bicep and leg plates, boot and knee armor, and his guantlets. I took off the head and cowl and put the cloth covered cape in there, anchoring it under the cowl.
The shoulder pads are the same method as my Comedian. I used a Movie Master's DK Batman. I used a strip of pleather, attached it to the shoulder, and then one under the pad--it allows for the pad to be in place](userimages/customs/49500/49328-1.jpg) DC Injustice Insurgency Batman Marvel Legendsby fitzjediHey there my friends!!
So today is some more Injustice. First off, Insurgency Batman. I love the way this guy looks in the game, armored up with lots...22 comments |
![[Batman Dark Knight Rises] Hello, this a simple work, a Batman begins bootleg knock off action figure turn into Batman dark knight rises. Entire suit has been hand re-sculpted with epoxy putty, repainted in black and I added the fabric layer.
thanks for watching!!!
sorry for the bad english.
JR](userimages/customs/49500/49324-1.jpg) Batman Dark Knight Rises | ![[6" Batman the Animated Series Custom Action F] First of all: sorry for the poor quality pictures. I had to take them with my phone and this was the best I could do with it!
Every fan boy knows how awesome Batman the Animated Series is but what we don't understand is why we haven't got a decent fully articulated action figure of him in 6 inch scale. Other Realmer's decided to fix this problem and have done some fantastic versions of him (which you really need to check out when your finished here!) Thus my ambitions to create my own were fueled!
The base body?
A DCUC silver Flash. I'm afraid non of his features survived my brutal dremelling, sanding and sculpting but if we are going to do this, we need to do it properly, right? As I love to pose these lil' critters, all articulation was retained. The lower arms however were removed and replaced with ball joints at the elbow so as not to interrupt the smooth animated look of his shoulders and arms. His hands were also given ball joints, painstakingly inserted into Flash's origina](userimages/customs/49500/49319-1.jpg) 6" Batman the Animated Series Custom Action F Batman Animatedby KnightimeFirst of all: sorry for the poor quality pictures. I had to take them with my phone and this was the best I could do with it!
Every fan boy knows ho...24 comments |
![[Batman] I used the Head, cape, hands, & belt from the DC Direct Batman Incorporated figure and the body is the Arkham City Batman by Mattel.](userimages/customs/49500/49287-1.jpg) Batman Batmanby MikeD42I used the Head, cape, hands, & belt from the DC Direct Batman Incorporated figure and the body is the Arkham City Batman by Mattel....4 comments | ![[TMNT Joker Vs Batman] I have no intention of stopping with these TMNT mash ups.](userimages/customs/49500/49254-1.jpg) TMNT Joker Vs Batman |
![[Dark Knight Returns Batman (Blue Variant Deco)] Hey guys, this week I opted for a simple custom: Dark Knight returns Batman in blue deco. Really a simple one. The figure was disassembled to work on the joints, then painted with a mix of citadel and model master acryl paints.
I opted to give him some more muscle definition and added some subtle layers of blue and grey to the costume. His soles were given a drybrush of brown to simulate mud, his facial features accented with darker tones, etc.
Once finished it still needed something extra... so I went ahead and gave him an unmasked Bruce Wayne head resculpted as close as possible to what he looked like in the movie. The head is actually a cast of an Ed McGuineess Superman… (of all heads!!) with the chin modded and hair resculpted. Its also compatible with the regular black and grey Batman. Thank you all for checking it out!](userimages/customs/49500/49197-1.jpg) Dark Knight Returns Batman (Blue Variant Deco) | ![[1970's to 1980's Batman] Hi All, geez its been ages
Recipe :
DC Direct Killing Joke Body & G Belt.
History of the DC Universe Arms, Cape & Neck.
Dc universe fists & Glove Spikes
Dc Direct Arkham Assylum Head.
This has been an ongoing custom that I previously had completed 2 years ago but decided the head I had on before didn't look quite right.I decided to also totally repaint my previous Neal Adams version and fix the grey to a darker grey and the blue to a lighter hue. I also took off the iconic G belt and resprayed it yellow from its original colour.I changed the head to the one from the DC Direct Arkham Assylum figure and reshaped the ear pieces. The result had been staring me in the face for 2 years until last week when I realised hang on a second this head will look way cooler.
Now I truly think I found a perfect recipe for the 1970's Neal Adams Batman.
Its a shame about the limited movement you can do but , you sacrifice looks for articulation these days. This would also fit right in i](userimages/customs/49500/49164-1.jpg) 1970's to 1980's Batman Batmanby metalmikeHi All, geez its been ages
Recipe :
DC Direct Killing Joke Body & G Belt.
History of the DC Universe Arms, Cape & Neck.
Dc universe fists &...23 comments |
![[Bigtocinet´S BATMAN] hi everyone! its batman time!
pretty simple custom but effective in my opinion. tell me what you think!
modded head, change belt and feet, and a fully repaint.
The gun comes from an "alien" playmobil.
i hope you enjoy it!! please comment! thanks](userimages/customs/49500/49141-1.jpg) Bigtocinet´S BATMAN DC Universeby bigtocinethi everyone! its batman time!
pretty simple custom but effective in my opinion. tell me what you think!
modded head, change belt and feet, and a ful...10 comments | ![[Batman Final Version] made a new head and gave him a new paint job, modeled his head off some concept art i found by nebezial on deviant art. in the backround is the groot i'm working on.](userimages/customs/49500/49044-1.jpg) Batman Final Version Marvel Universeby Mutation92made a new head and gave him a new paint job, modeled his head off some concept art i found by nebezial on deviant art. in the backround is the groot ...2 comments |
![[Batman beyond Mark I] I was thinking about Iron Man's armors and how each suit improved on the last. It's never complete and he keeps tinkering with the tech to make it better. It was only logical that as Bruce Wayne approached his older years, he would do the same.
It is not quite the suit that we know from Batman Beyond, but Bruce has taken significant steps to protect himself and amplify his strength to compensate for being a little slower, and a little weaker.
The first thing that I thought he'd do would be close off the lower face and give himself more protection. This would also allow for the suit's stealth tech to work better. The tech isnt quite there to include the built in mouth that Terry would get, and it makes him look a little more ninja like.
Next, I figured that after years of adventuring, Bruce is not going to giveup the cape so easily. After all, it cloaks him and works well as a weapon also. Eventually he'd decided to ditch it and build the glider wings under the armpits, but](userimages/customs/49000/48978-1.jpg) Batman beyond Mark I | ![[Weathered Iron Batman] I had an extra Marvel Legends Iron Man laying around and decided it would be cool to make an Iron Batman using the Azrael head. I experimenting with some different kind of paints to give him an Iron look with rust effects. I think he turned out pretty cool and I will definitely be using this weathered effect on other figures down the road. Hope you guys like him.](userimages/customs/49000/48977-1.jpg) Weathered Iron Batman Marvel Legendsby RG3 CustomsI had an extra Marvel Legends Iron Man laying around and decided it would be cool to make an Iron Batman using the Azrael head. I experimenting with s...7 comments |
|