![[Batwoman (Kate Kane] I've wanted to make a Batwoman custom figure for a while, and got around to it after finding an ML 10 Mystique figure. Unfortunately, this isn't the cooler Mystique figure that many customizers have been using for characters such as Talia al Ghul, but I decided to go for it anyway. I used the head from ML Scarlet Witch, and sculpted over the mask (it now seems the head is a mite too big). I sculpted the Bat-symbol, boots and gloves, with the glove scallops/spikes cut from plastic bubble packaging. The belt was from a 5 inch Bruce Wayne-to-Batman figure. The cape was from an old Tomorrow Woman figure, which I cut to create the scalloped tips. Then, it was all painted up (this figure was pretty difficult to paint, for some reason). On the whole, I'm not really satisfied with it, but I gave it a shot. My camera has a "selective colour" function which I used so only the red shows up in the first picture.](userimages/customs/48000/47861-1.jpg) Batwoman (Kate Kane Batmanby JeddTheJediI've wanted to make a Batwoman custom figure for a while, and got around to it after finding an ML 10 Mystique figure. Unfortunately, this isn't the c...10 comments | ![[Batwoman 2.0] This is pretty much a complete overhaul of my previous Batwoman figure. I just kept wanting to tweak and improve it to make her look more like her comics counterpart. She's really one of my favorite characters and favorite customs!
- the base figure and the cape relain the same: DCD Justice Batgirl (who has a perfect woman's figure) and the cape from the Batman and Son DCD line
- the boots and gauntlets seemed too thick for her so I removed the Sculpty from them to streamline then more
- I used only a bit of Sculpy to fill in the spaces on the original Batgirl boots instead of sculpting the entire boot to the foot
- I used a tiny piece of twisty-wire at the bottom of both gloves to give the impression that she is wearing a separate piece. Used small strips of rubber band around the original spikes to create the other part of the gauntlet
- I reformed the hair using Sculpty for a more windblown look and separate the locks
- Painted a light layer of white over her skin color to make her](userimages/customs/48000/47579-1.jpg) Batwoman 2.0 Batmanby latinladThis is pretty much a complete overhaul of my previous Batwoman figure. I just kept wanting to tweak and improve it to make her look more like her com...3 comments |
![[Batwoman] High Realmer's , I'm back with another, The Batwoman. I really enjoyed doing this custom again and I hope you will enjoy it too. For Batwoman multiple body parts starting with the head, I used mu widow, sculpted mask and top-half of hair. Upper female me torso with dc infinite heroes lower arms. Upper legs are mu spiderman and lower legs are dc infinite heroes. The cape is from mu scarlet witch, sculpted belt and bat emblem. Hope u all like, comments are welcomed, and have a good one!](userimages/customs/46500/46237-1.jpg) Batwoman | ![[Batwoman] 2/19/13: I've wanted to revisit my Batwoman figure for awhile. There were some things about it that I wanted to improve:
- the boots and gauntlets seemed too thick for her so I removed the Sculpty from them to streamline then more
* I used a bit of Sculpy to fill in the spaces on the original Batgirl boots instead of sculpting the entire boot
* I used a tiny piece at the bottom of both gloves to give the impression that she is wearing a separate piece. Used small strips of rubber band around the original spikes to create the other part of the gauntlet
- I reformed the hair using Sculpty to make it more like how it appears in her book
- Painted her face a paler color
- Attached an extra piece to her cape over her shoulder
I'm a lot more satisfied with how this figure came out. I keep hoping, though, that DC releases a current version of Batwoman sooner rather than later
(The first pic btw is the BEFORE one; the second is the AFTER)
The original DCD Batwoman was nice but it's b](userimages/customs/43000/42535-1.jpg) Batwoman Batmanby latinlad2/19/13: I've wanted to revisit my Batwoman figure for awhile. There were some things about it that I wanted to improve:
- the boots and gauntlets see...4 comments |
![[B3gw528 Kate Kane Batwoman V2] well my first wasnt good
but i got a new huntress so my old huntress body (was star saphire,then a catwoman,then huntress) now batwoman
my original head
new sculpt and full repaint
thanks for viewing](userimages/customs/42500/42265-1.jpg) B3gw528 Kate Kane Batwoman V2 Batmanby Chester001well my first wasnt good
but i got a new huntress so my old huntress body (was star saphire,then a catwoman,then huntress) now batwoman
my original h...0 comments | ![[B3gw528 Batwoman | Kate Kane] well love the character and dcuc havent yet done a figure of her yet for whatever reason.
so now ive got movie masters catwoman so my custom version was scrap/fodder so i used her body and got all the excess sculpt off and gave her x-23 boots and some other feet.
full repaint
a robin cape
etc
the head was some wonderwoman but i tried to sculpt it so she didnt look like huntress which was hard
job done
thanks for viewing](userimages/customs/41500/41194-1.jpg) B3gw528 Batwoman | Kate Kane Batmanby Chester001well love the character and dcuc havent yet done a figure of her yet for whatever reason.
so now ive got movie masters catwoman so my custom version ...4 comments |
![[Batwoman] I started with the standard mu female body invisible woman I sculpted her mask first then her belt then I painted her then I slipped her cape on](userimages/customs/38000/37840-1.jpg) Batwoman Marvel Universeby dcauguyI started with the standard mu female body invisible woman I sculpted her mask first then her belt then I painted her then I slipped her cape on...2 comments | ![[JLU Batwoman] It looks like a simple custom but it sure bloody damn difficult to make it good....](userimages/customs/37500/37368-1.jpg) JLU Batwoman |
![[Batwoman] I got this Batgirl and the legs just snapped off:(
These tiny little girl figures are so delicate!
So I decided to make a Batwoman
Head - DCUC Wonder Woman With Sculpted mask
Body - DCUC Batgirl
Legs - ML Emma Frost
I'm super happy with this. Hope you guys fancy her too!](userimages/customs/34500/34221-1.jpg) Batwoman D.C. Universeby JonnyVuI got this Batgirl and the legs just snapped off:(
These tiny little girl figures are so delicate!
So I decided to make a Batwoman
Head - DCUC Wonder...8 comments | ![[Batwoman] This custom was very simple, made some repaint and some esculpted ears and belt, and there you go...](userimages/customs/17000/16846-1.jpg) Batwoman Batmanby pablofettThis custom was very simple, made some repaint and some esculpted ears and belt, and there you go......0 comments |
![[Batwoman] This is a figure that I want to make because is a new concept for a Batwoman, probably for here Mexico and is based on my girlfriend. In first place was created for a comic con costume but then we create her a new story.
Its a simple custom just a little of sculpting and a little paint job and voila.
enjoy it, please leave comments...](userimages/customs/15000/14766-1.jpg) Batwoman Batmanby pablofettThis is a figure that I want to make because is a new concept for a Batwoman, probably for here Mexico and is based on my girlfriend. In first place w...4 comments | ![[Batwoman] Got ahold of a cheap DCD Batwoman so I went ahead and customized my own Batwoman using parts from it.
Base: ML Wasp
Head, Lower Arms, Cape, Lower Legs, Belt: DCD Batwoman](userimages/customs/14000/13896-1.jpg) Batwoman Batmanby DDAGot ahold of a cheap DCD Batwoman so I went ahead and customized my own Batwoman using parts from it.
Base: ML Wasp
Head, Lower Arms, Cape, Lower Leg...3 comments |
![[Batwoman] An interesting DC character, but too bad she never appear in the show. So here I made her.](userimages/customs/12500/12314-1.jpg) Batwoman | ![[Batwoman] First I want to say a big thank you to the people who put encouraging and honest feedback for my customs, I really wanted to reply to the comments but, had trouble posting replys, but now I finally found out how to register to the forums, and I will definatley reply and post. Well back to the custom, I really liked the movie Mystery Of The Batwoman, and wanted to make a custom of Batwoman, I used a Hawkgirl base, (Batman Animated)Poison Ivy's arms, JLU Dr. Light's cape, JLU Batman's ears and a Batgirl Thirillkiller kneecuff(for the Bat Sign). I sculpted the face, the Bat Sign and a tiny bit on the arms. More customs to come. Hope you like it. God Bless](userimages/customs/6500/6293-1.jpg) Batwoman |
![[Batwoman] I watched this Batman Animated Feature, and thought the character would make a neat custom. I have never made a animated character before. But think she came out really well.](userimages/customs/1000/640-1.jpg) Batwoman | ![[BatWoman] This figure was made out of a Mattel BatGirl and a Jack in the Box Premium BatGirl...The cape was taken from the Batman and Robin movie BatGirl and then painted.](userimages/customs/500/306-1.jpg) BatWoman Batmanby HolyHeroes!This figure was made out of a Mattel BatGirl and a Jack in the Box Premium BatGirl...The cape was taken from the Batman and Robin movie BatGirl and th...6 comments |
![[Batwoman] This is a custom of Batwoman from the animated movie Mystery of the Batwoman.](userimages/customs/500/296-1.jpg) Batwoman | |
|