![[Cap & Bucky] caps a repainted kirby cap, with a couple fodder pouches, a thompson smg and shield from ult ww2 cap. bucky is a kid flash with robin head, joker collar, loki tunic for shirt detail and kamandi belt. boot cuffs and center of collar sculpted. then total repaint on both. robin head from camco kid. both guns from casting cave.
thanks for looking and all comments are greatly appreciated.](userimages/customs/50000/49600-1.jpg) Cap & Bucky | ![[Captain America Bucky Barnes] Second figure for the day,
Recipe:
Torso,upper legs&belt-DCUC Vigilante
Lower legs,Arms&Head-DCUC Blue lantern Flash
I also took the ear wings,shield, pistol&knife holsters from a ROML Bucky Cap
Thanks for checking him out and tell me what you think
*Sorry the Pics are blurry*](userimages/customs/49500/49471-1.jpg) Captain America Bucky Barnes Marvel Legendsby TOK3NSecond figure for the day,
Recipe:
Torso,upper legs&belt-DCUC Vigilante
Lower legs,Arms&Head-DCUC Blue lantern Flash
I also took the ear wings...4 comments |
![[Bucky and Toro] This started out by accident. I was heating the hair for an X-23 and held the heat on the head too long and partially melted the face. After a few choice words, I came up with the Invaders sidekicks. Ground away the clothing features and used hot glue to make the flames on Toro. For Bucky used the belt from Super Patroit, green stuff for the hair, boots, collar, and gloves. Used toothpaste foil for the shirt and mask.](userimages/customs/49000/48815-1.jpg) Bucky and Toro Marvel Legendsby YBulltoisThis started out by accident. I was heating the hair for an X-23 and held the heat on the head too long and partially melted the face. After a few cho...2 comments | ![[Bucky Captain America] I just wanted a variant head to change up my display every now and then for my Bucky Captain America, so I ordered a Winter Soldier head cast from CKCastings. I painted up the head cast with trying to match up the skin tones the best that I could.](userimages/customs/47000/46894-1.jpg) Bucky Captain America Marvel Legendsby 1987olds442I just wanted a variant head to change up my display every now and then for my Bucky Captain America, so I ordered a Winter Soldier head cast from CKC...10 comments |
![[Marvel Universe Bucky Captain America] Hello Everybody!
here is my custom Bucky Captain America
He is made from the Ultimate Captain America with sanded of chain mail, and sculpted details.
hope you all enjoy!](userimages/customs/45500/45073-1.jpg) Marvel Universe Bucky Captain America Marvel Universeby gonardHello Everybody!
here is my custom Bucky Captain America
He is made from the Ultimate Captain America with sanded of chain mail, and sculpted details....4 comments | ![[Movie Concept Winter Soldier Captain America BUCKY] Captain America, Plus a different head sculpt + sculpting, and Iron Man arm. Added fodder bits for details. Full Repaint.](userimages/customs/43500/43418-1.jpg) Movie Concept Winter Soldier Captain America BUCKY |
![[Captain America Buckycap Hulked out] Hulked out Buckycap started out as a Juggernaut figure Split his torso open, gave him arms from world war hulk, a head from classic avengers hulk, shaved his head down and sculpted the mask on, added wings from sub-mariner's ankles to the mask, sculpted the cuffs for the gloves and gave him a paint job!
(now i just have to find a belt to fit him!)](userimages/customs/43000/42857-1.jpg) Captain America Buckycap Hulked out Marvel Universeby skrappsHulked out Buckycap started out as a Juggernaut figure Split his torso open, gave him arms from world war hulk, a head from classic avengers hulk, sha...8 comments | ![[Bucky] Here I was trying to make a beefier Bucky. I started with a HOM Logan figure then I swapped in some FO Punisher Arms, and some Captain America 2-pk legs with the cuffs modified. Then I added the studs to the chest and sculpted on a new color. For the head I used a DCD Aquaman. I thought it was just a tad to big for the body but thought I'd go for it anyway. Also gave him a Socom pistol, knife (from Danger Girl Natalia) and a Tommy Gun modified with an extra handle and a drum magazine.
cheers](userimages/customs/42500/42347-1.jpg) Bucky Marvel Legendsby Green SkinHere I was trying to make a beefier Bucky. I started with a HOM Logan figure then I swapped in some FO Punisher Arms, and some Captain America 2-pk l...22 comments |
![[Bucky Barnes] This is my Bucky figure, I tried to get a military-but-classic look. Have I got it?
The base is Colonel Miles Quaritch from Avatar 6´´ series with arms from ML series 7 Ghost Rider, hands from ML Daredevil Movie and head from DCUC Green Lantern Hal Jordan .
I chose this head because I wanted a more mature look.
The jacket have two pieces of leather: one on the torso (over card board) and other to get a coolest neck piece. The jacket inside is red so you can see classic red collar.
The buttons are made of plastic cutted with a tool to make holes in belts.
His arms show elbow pads from Ghost Rider arms.
The lower body is just a repaint: black belt, red pants and blue boots, retaining their original military look.
Hope you like!](userimages/customs/41500/41365-1.jpg) Bucky Barnes Marvel Legendsby javier2099This is my Bucky figure, I tried to get a military-but-classic look. Have I got it?
The base is Colonel Miles Quaritch from Avatar 6Â&A...6 comments | ![[Captain Bucky O'hare] So like i said in the workstation, i've been wanting to give this guy a crack since i first joined the realm and noticed there was only 3 entries into the Bucky O'Hare category. I wanted to go away from my usual style and try something else. So I went for a cartoon style. It was quite nerve racking adding the black lines after doing all the layers of paint he needed. There are a few lines that went wrong but overall i'm pretty pleased with him. Here's the recipe.
RECIPE:
Base = DCUC Negative man, torso, arms and legs re-sculpted for that spacesuit look.
Head = Vintage Bucky O'Hare, ears shaved down and foam for the ear cuffs. It just sits over the head of a DCUC Dr.Midnite.
Collar = sculpted, stars are the mives old earrings.
Stars on epalletes = cut out from a fancy watch strap.
Epalettes and cloak = vintage Bucky, sculpt to blend.
Upper gloves = Vintage Bucky, sculpt to blend.
lower gloves = Sculpted.
Hands = ML Beta ray Bill.
Belt = Sculpted some random tube for the r](userimages/customs/39000/38778-1.jpg) Captain Bucky O'hare Bucky O'Hareby EDarthTSo like i said in the workstation, i've been wanting to give this guy a crack since i first joined the realm and noticed there was only 3 entries into...48 comments |
![[Captain America (Bucky Barnes)] Good day realmers! So, I’d possibly get my very own piece of the new RML Bucky-Cap in a couple of days. I just wanted to make a post for this little guy who had been filling-in for the spot in my display for a good 2 years since his completion around December of 2009, shortly after my 1st Bucky-Cap. And as you can see, some parts of him needs some paint re-touching... Paired weapons for this bad boy ‘cause double wield is awesome.
Recipe
FO Punisher: Body (sculpted front and rear stars), Weapons (Boot knife re-positioned to left shoulder; Luger? pistol repositioned to left leg)
FO Cap: Head (resculpted), Belt, Boots
LCBH Madman: Gloves
ML6 Punisher: Pistol and Holster
Bullseye: strap
Cheap Soldier fig: other knife](userimages/customs/37500/37484-1.jpg) Captain America (Bucky Barnes) Captain Americaby witherdustGood day realmers! So, I’d possibly get my very own piece of the new RML Bucky-Cap in a couple of days. I just wanted to make a post for this li...3 comments | ![[Bucky (Movie Version)] I decided since it's been a little while since the movie figures have been out, that a Bucky figure won't be made...so I did. I bought the Lost Boys figure for the basic build, cloths & coat. I used a DC Justice Society alternate Starman head as the Hair was right & shaved the beard off. Built the tunic from cutting the coat up. Built the Boot Spats & used a leather strip for his shoulder belt. Then a whole lotta repainting, the Tunic is actually a dark Navy Blue but due to the cloud cover outside changing my shading...it's a little off. Shoulder insignia was done in 1 try, darn happy with that! Any thoughts? Long live Winter Soldier!!](userimages/customs/34500/34305-1.jpg) Bucky (Movie Version) Captain Americaby CapSoldierI decided since it's been a little while since the movie figures have been out, that a Bucky figure won't be made...so I did. I bought the Lost Boys f...3 comments |
![[Bucky Capt] This was made for a friend! Simple recipe using daredevil icons figure! Everything else was sculpted! Comments and crits are welcome!](userimages/customs/34000/33779-1.jpg) Bucky Capt | ![[Marvel Universe Classics Bucky] Here we have a classic Bucky. He's a Kid Flash with Beast boy head and Kamandi belt. The boot cuffs are re-purposed Red Tornado gloves.](userimages/customs/34000/33761-1.jpg) Marvel Universe Classics Bucky DC Universeby LesternessmanHere we have a classic Bucky. He's a Kid Flash with Beast boy head and Kamandi belt. The boot cuffs are re-purposed Red Tornado gloves....16 comments |
![[Captain America (Bucky)] again this has been done for some time
just a repaint of the blue beetle with some minor sculpting
thanks for looking](userimages/customs/32500/32019-1.jpg) Captain America (Bucky) | ![[Bucky] base figure/cobra soldier...head is from star wars anakin skywalker.and some of little details... and hand paint it,oh,, the cyborg arms is from a cobra soldier bat..salamat po.](userimages/customs/32000/31522-1.jpg) Bucky Marvel Legendsby junkman03base figure/cobra soldier...head is from star wars anakin skywalker.and some of little details... and hand paint it,oh,, the cyborg arms is from a cob...1 comments |
![[Squady Bucky Cap] My wife is super cool she lets me collect 6 inch figs and then she collects squadies, Specific barbies and then her hobbies of Sewing, Quilting, embroidery and scrap-booking. So when she gets duplicates of squadies she goes through and chooses the best one to keep and we then give the other to the 4 nephews. But if their is tons of the same fig which there usually is as the repaint and repackage 1 in almost every 2 pack. So every 6th fig or so She has me make a new figure. This is the first one I did for her a year before they actually released one of him. LOL go figure I make it then they make it I have that kind of luck. So I have photographed him with the original and the recent release.](userimages/customs/31500/31490-1.jpg) Squady Bucky Cap Super Hero Squadby Bob-A-FerretMy wife is super cool she lets me collect 6 inch figs and then she collects squadies, Specific barbies and then her hobbies of Sewing, Quilting, embro...2 comments | ![[Captain America "Bucky Barnes"] This is the second Captain America incarnation figure made for may boy, used Face off Punisher as base figure, lower legs and boots are from ML Series 1 Cap. forearms and gloves and face from LCBH Madman, silver base color and clear blue tamita paint for the shiny look of the uniform, this is also the second version that i made from this character, first one was a mess, i`m not so convinced about the result but love the fact that my boy are happy with his figures, that what im working for! please feedback.](userimages/customs/31500/31102-1.jpg) Captain America "Bucky Barnes" Marvel Legendsby thejoemxThis is the second Captain America incarnation figure made for may boy, used Face off Punisher as base figure, lower legs and boots are from ML Series...7 comments |
![[Captain America (Bucky)] This is a Captain America custom I made for a Marvel "Heroic Age" entry in CustomCon 27. I used an HML Daredevil since he seemed appropriately sized for Bucky, then resculpted the head a bit and smoothed out a lot of the details on the costume. Hardest part was getting the clear colors on there evenly while keeping the lining clean, but the time paid off and I think he came out great. Easily the best of my 3 attempts at this suit. I just love the redesign and the character's run in the latest volume of Cap.](userimages/customs/31000/30738-1.jpg) Captain America (Bucky) Marvel Legendsby raybotThis is a Captain America custom I made for a Marvel "Heroic Age" entry in CustomCon 27. I used an HML Daredevil since he seemed appropriate...7 comments | ![[Captain America (Bucky)] Probably a year behind this but finally got around to the new Captain. Started with the HML Spider-man, Bullseye's legs, Bucky's boots, and Madman's gloves. The head is a splice act with the top being from Captain America FO and the 2 pack Winter Soldier head.
A little practice with airbrushing and taping things off. Didn't go as well as planned but I still like the figure.
The gun and knife are removable.
A shout out to Raybot as it was his figure that inspired this creation.
Thanks for looking!](userimages/customs/30500/30464-1.jpg) Captain America (Bucky) Marvel Legendsby Truwe 316Probably a year behind this but finally got around to the new Captain. Started with the HML Spider-man, Bullseye's legs, Bucky's boots, and Madman's ...5 comments |
![[Bucky Barnes] Here is my 2nd attempt at Bucky. I used a Hasbro Torch figure as base. Sculpted the boots, shirt and collar. The rifle is off Black Widow. The belt was laying around and fit perfect.
I originally was going to use the Torch head and started sculpting mask and hair when I noticed his face was a bit melted. So I scratched that and used the Hasbro Winter Soldier head. Oh yeah and I used brass brads as shirt buttons. The paint application was to match Caps colors. Hope you guys like him. Keep customizing!](userimages/customs/30000/29636-1.jpg) Bucky Barnes Captain Americaby crazyhorseHere is my 2nd attempt at Bucky. I used a Hasbro Torch figure as base. Sculpted the boots, shirt and collar. The rifle is off Black Widow. The belt wa...4 comments | ![[Captain America -Bucky] This is a pretty simple custom i scuplted the mask on the winter soldier alt head from the two pack then scuplted the wings and star. Im pretty happy with it hope u guys like.](userimages/customs/30000/29519-1.jpg) Captain America -Bucky Marvel Legendsby CHOOSE1This is a pretty simple custom i scuplted the mask on the winter soldier alt head from the two pack then scuplted the wings and star. Im pretty happy ...2 comments |
![[Captain America with Bucky and Metal Mayham] This is a metal mayham suit that was re painted into captain americas colors. when we bought the suit it was very damaged from the back and it ws missing many peices. So the whole set up on the inside had remade to fit this particular captain america figure. The suit has two LED lights added that are powered by 3 AAA batteries that are easy to change. If you raise the right arm of the suit the gun has lights and shooting sound. we added the gun on the top. it moves up and down and swivels 360 degrees. also there are two stands on the top of the suit to hold buckys guns while he is using the other one. we added the stands the figures came with to give them places to stand. The seat that captain america sits in was stolen from our daughters barbie van then re shaped and designed a bit to fit in. the foot pedles were taken from 2 different speed racer cars. there are canteins and boxes added into the legs to turn it into a storage center. there is a place for captain america to hang his](userimages/customs/29500/29187-1.jpg) Captain America with Bucky and Metal Mayham Captain Americaby mmdiegoThis is a metal mayham suit that was re painted into captain americas colors. when we bought the suit it was very damaged from the back and it ws mis...6 comments | ![[Bucky Barnes] Again I thought ML Icon was a good choice for bucky since I did winter soldier with him. Sanded off FF4 symbol, sculpted gloves and other areas. Used Foamies re-enforced with resin and paint. Then finally took a military web belt with canteen, pouches and gave him a tommy gun. Came out very clean.](userimages/customs/29000/28804-1.jpg) Bucky Barnes Marvel Iconby ChazzoAgain I thought ML Icon was a good choice for bucky since I did winter soldier with him. Sanded off FF4 symbol, sculpted gloves and other areas. Used ...0 comments |
![[Captain America (Bucky Barnes)] Hey there! Here's my take on a Bucky Barnes Captain America.
Recipe:
FO DD Head, resculpted
FO Punisher Body
Toy Biz Cyclops Boots
DCSH Batman Belt Pouches
Ult. Nick Fury Pistol
DMC Cast Cap. Shield
Pretty straight forward! Just some simple modding, resculpting, and hole filling. Paint took some time, but after all was said and done, I'm quite happy with it.](userimages/customs/28000/27997-1.jpg) Captain America (Bucky Barnes) Marvel Legendsby cbrocustomsHey there! Here's my take on a Bucky Barnes Captain America.
Recipe:
FO DD Head, resculpted
FO Punisher Body
Toy Biz Cyclops Boots
DCSH Batman Belt P...1 comments | ![[Captain America (Bucky Barnes)] This guy was for a friend. I thought he'd be super easy, but it turns out painting stars really is not cool.
Heads: HML Human Torch
Body: HML Ben Reilly Spiderman
Hands: HML Union Jack
Lower Legs: TBML Taskmaster
I did an unmasked head since I had an extra johnny storm one just laying around.
The photos are weird though, they make his flat black shiny, and his shiny blue, red, and silver flat. In person, his metallics have a real nice sheen going on.](userimages/customs/27500/27469-1.jpg) Captain America (Bucky Barnes) |
![[Golden Age Bucky] My golden age Bucky is one I'm really proud of not because its a really good custom but this is were a lot of my work started Removable masks I love removable masks to me thats one of the best action features a toy can have, variant heads are great but when I figured out how to pull off a removable domino mask that can stand up to a hard day of adventure and playing with out falling off I was impressed with my self so since then (keep in mind I finished this custom back in 09 I think) I have done a lot of mask work so say tuned for that) I have done a lot with removable masks
This was Kid Flash 100% with some face alteration, painting and some greenstuff
The removable mask is greenstuff and if some one will tell how to post a tutorial I will gladly show everyone how to do this and if not I'm still going to post how to do it just like a normal custom (keep in mind I have got in a lot better since Bucky here this was just the first)
thanks](userimages/customs/27000/26705-1.jpg) Golden Age Bucky Invadersby somethinggeekyMy golden age Bucky is one I'm really proud of not because its a really good custom but this is were a lot of my work started Removable masks I love r...1 comments | ![[Bucky Cap] Today we take a look at the legendary Marvel Bukkikyappu custom. Captain America is made from eight series. He was shaved, and then down the black, smooth base. Sculpture star, the wings on his head on his chest, gloves and boots went to cuff him. The knife and gun holster pouch were taken from the shield soldiers, bonded over their utility belt instead. To which he is fully painted, and sealed for protection.](userimages/customs/26500/26240-1.jpg) Bucky Cap Marvel Legendsby Eniam_RejToday we take a look at the legendary Marvel Bukkikyappu custom. Captain America is made from eight series. He was shaved, and then down the black, sm...2 comments |
![[Ult. Bucky] I made a more badas$ Bucky because well Look for your self
Head-Nightwing
Torso-Cap.Cold
Arms-Taskmaster
Knee caps-Conan?(I think)
Shins-cyclops (stealth I think)
Boots-Cyclops (with tops sculpted)
Holsters-sculpted
Everything else sculpted and painted
Thanks for looking](userimages/customs/26000/25944-1.jpg) Ult. Bucky Marvel Legendsby somethinggeekyI made a more badas$ Bucky because well Look for your self
Head-Nightwing
Torso-Cap.Cold
Arms-Taskmaster
Knee caps-Conan?(I think)
Shins-cyclops (s...2 comments | ![[Captain America Bucky] Modified paint job on chest and pants. Added gun belt, knife and hand gun.](userimages/customs/25500/25162-1.jpg) Captain America Bucky |
|