![[Ripclaw] This Transformers Prime custom Beast Hunters Ripclaw features two easy to do mods and one not so easy to do. Her neck mod involves buying a set of the double ball joints from Big Bad Toy Store and removing her old one, drilling down into the neck piece so you can glue in the ball cup. The other ball post end snaps perfectly in her head socket. For her ball-jointed elbows I used TF Movie Depthchage's elbows, cutting the originals off at the red swivel peg and drilling into that to mount the gold ball cups. While Ripclaw's bio mentions the character is a 'She' there's still argument in the Transformers fandom. Here I went to put an end to that buy sculpting a brand new chest plate to show off her new assets. They don't get in the way of her Transformation and with the additional mods she can look in any direction and put her claws on her hips! Some panel lining, shading, and recoloring of her head and this shapely fembot dragon was ready for battle.](userimages/customs/49000/48526-1.jpg) Ripclaw Transformersby Jin SaotomeThis Transformers Prime custom Beast Hunters Ripclaw features two easy to do mods and one not so easy to do. Her neck mod involves buying a set of the...5 comments | ![[Ninja Claw] NINJA CLAW
head-ninja gaiden
body-bullseyes
hands-lotr
boots-lotr
sword-some samurai
bow-lotr
arrows-lotr
fabric
leather
pin
LOVE NINJAS!(one day i ll make an army)](userimages/customs/48000/47863-1.jpg) Ninja Claw Marvel Universeby megatrooperNINJA CLAW
head-ninja gaiden
body-bullseyes
hands-lotr
boots-lotr
sword-some samurai
bow-lotr
arrows-lotr
fabric
leather
pin
LOVE NINJAS!(one day i ...1 comments |
![[Red Claw] Here is my custom made Red Claw figure.
I used Catwoman as a base and Nightwing's hands, all the details has been sculpted,
I hope you like it](userimages/customs/46500/46472-1.jpg) Red Claw Batman Animatedby zelu1984Here is my custom made Red Claw figure.
I used Catwoman as a base and Nightwing's hands, all the details has been sculpted,
I hope you like it...2 comments | ![[Clawful] These are two custom painted Clawful and Spikor heads. Compliments of sculptor/artist Kevin Kosse. He shipped me the heads and they arrived in gray cast. Painted very thin layers, about 8-10 coats to get them looking right. Then sealed with Citadel Purity Sealant. A very simple custom or 2. Only paintwork done was to head.
He-Man!](userimages/customs/46000/45726-1.jpg) Clawful |
![[Iron Claw] Beret - GI Joe Flint
Head - GI Joe Claw
Body - MU Namor
Boots - MU Captain Britain](userimages/customs/45500/45034-1.jpg) Iron Claw | ![[Ripclaw] I hated the Legendary Heroes version of Ripclaw. It was just plain stupid looking. On the other hand I loved the Mcfarlane toy version of ripclaw but hated that it had no articulation. So I combined them both. I took the head and hands of the mcfarlane version did some minor dremeling and made them fit. I added some shading to the body and legs. I also painted the belt. He turned out pretty good for a three hour job.](userimages/customs/45000/44851-1.jpg) Ripclaw Imageby BWSI hated the Legendary Heroes version of Ripclaw. It was just plain stupid looking. On the other hand I loved the Mcfarlane toy version of ripclaw bu...3 comments |
![[Yellow Lantern Rip Claw] Hello Realmers! Here is my Original Custom Rip Claw Yellow Lantern. it just a simple HEad and hand swap from a Spawn Rip Claw. One evil dude deserves to part of the Yellow Lantern Corps.](userimages/customs/43000/42880-1.jpg) Yellow Lantern Rip Claw D.C. Universeby Darth_Reign_Hello Realmers! Here is my Original Custom Rip Claw Yellow Lantern. it just a simple HEad and hand swap from a Spawn Rip Claw. One evil dude deserves ...2 comments | ![[Clawful] This my take on MOTU Clawful. I would say, a movie version of it? I've seen version of him which he looks like a lizard? I'm not too familiar with the character so I took some of the things I like from different pictures and put it together the way I had envisioned Clawful. Hope you guy enjoy it!
Base: ML Scorpion
Belt: Two pack Conan with sculpting parts
Head, Body, Arms, Legs and Feet has sculpted parts sculpted](userimages/customs/43000/42864-1.jpg) Clawful |
![[Dark Claw, Amalgam Comics] Wolverine variant base body, House of M Wolverine arms (I think), Longshot boots. Fabric cape, packaging plastic for the mask flares and a spiffy paint job.](userimages/customs/43000/42834-1.jpg) Dark Claw, Amalgam Comics Marvel Legendsby BotCustomsWolverine variant base body, House of M Wolverine arms (I think), Longshot boots. Fabric cape, packaging plastic for the mask flares and a spiffy pain...2 comments | ![[Dark Claw] Dark Claw – Black panther base . Custom sculpted boot detail, custom sculpted “razor edges” custom sculpted “winged” mask and boot detail. Custom sculpted glove armor. Custom added claws (modded for the dark claw look) AoA wolverine head sculpted over. Black spandex cape with metal rods to allow pose-ability
Thanks for taking the time to view and comment on my work... lots more to come](userimages/customs/43000/42516-1.jpg) Dark Claw |
![[X-Force Wolverine (Steel Claws)] What up Realmer's!!
Today I bring you Wolverine in his X-Force duds, I know this guy has been done almost as much as Deadpool but he's been sitting on my to do list for some time now and I figured I should finish him...he even has Steel Claws (this is my first time doing metal claws)
Simple recipe
Head: Wolverine (ML 25th anniversary)
Body: Ultimate Wolverine (ML)
Hands: Batman Beyond (DCUC) w/ minor sculpting and real metal claws (ladies hairpins)
Let me know what you think ?](userimages/customs/43000/42505-1.jpg) X-Force Wolverine (Steel Claws) Marvel Legendsby 3bcustomsWhat up Realmer's!!
Today I bring you Wolverine in his X-Force duds, I know this guy has been done almost as much as Deadpool but he's been sitting on...8 comments | ![[Metal Claws for Wolverines] Metal claws made with alluminium](userimages/customs/42500/42441-1.jpg) Metal Claws for Wolverines |
![[Razor Claws Alien] a new alien figure build using as base a gymnastics barbie, the details of the skin was reproduced using a neddle, and the head was reproduced from the warrior from Alien resurrection, movie maniacs series.](userimages/customs/41500/41467-1.jpg) Razor Claws Alien Aliensby betito1616a new alien figure build using as base a gymnastics barbie, the details of the skin was reproduced using a neddle, and the head was reproduced from th...4 comments | ![[Clawful (MOTU Hybrid)] Oh. Dear. GOD. I have been waiting SO LONG to post this figure! A year. AN ENTIRE YEAR, I've been working on this guy on and off. A whole year drilling and digging and cutting and sculpting and finding JUST the right joints, or actually making new joints BY HAND. 12 months. 52 weeks. 365 days, AT MINIMUM. He's been scattered in pieces, taking up so much space on my worktable for so long, I'D FORGOTTEN I HAD THAT MUCH SPACE ON MY WORKTABLE!!
Well, here he is, finally, after all this time, I present Skeletor's huge, hunched henchman, the looming, lethal lobster, Eternia's deadliest catch . . . Clawful!
MOTU Hybrid is my attempt to unify the best of all three MOTU eras. The ideas (i.e. color schemes and concepts) of the original cartoon, the sculpts of the 2002 toys, and the articulation of modern figures, at a far more reasonable cost. Please note that "in a reasonable time frame" isn't even MENTIONED in that criteria (though from now on, it just may be!). What ca](userimages/customs/40500/40330-1.jpg) Clawful (MOTU Hybrid) |
![[Darkclaw] Base fig:LOTDK batman
Mask: scarab (mummies alive)
Mask wings: mcfalane helm
Cape: old sweatshirt
Claws: nails](userimages/customs/40500/40204-1.jpg) Darkclaw Amalgamby braleefunBase fig:LOTDK batman
Mask: scarab (mummies alive)
Mask wings: mcfalane helm
Cape: old sweatshirt
Claws: nails...2 comments | ![[Wolverine (Claw Mod)] just added some metal claws that are removable as well.](userimages/customs/40000/39810-1.jpg) Wolverine (Claw Mod) |
![[Dark Claw] Only a litle wolverine sculpted to make it more like the comic, also I put real metal claws.I hope you like.](userimages/customs/38500/38486-1.jpg) Dark Claw | ![[Clawful] So this guy has been a looon time in the works and this contest finally gave me the motivation to get him finished. A lot of sanding and sculpting went into this one and a whole lot of sculpting too. Most of the articulation comes from a Thorbuster Ironman and has been sculpted over and to blend in. I'll give a full breakdown of how each joint was achieved below. He's gone from 0 to 31 P.O.A in about 6 months, yeah, I started him that long ago and that's probably being generous.
So I figure everyone has different views on what a P.O.A is (personally I see it as any direction a part can move) so i'll list the 31 and see if y'all agree
1.Head - Up and down - Thorbuster IM neck dremmeled off then sculpted over to blend.
2.Head - spins round
3 and 4. Shoulders - spin round - ML Maestro (idea stolen from Argenta)Sanded down, sculpt to blend
5 and 6. Shoulders -up and down
7 and 8. Upper arms - swivel round - sanded down the Maestro arms to a cuff that fit over the peg and dremelle](userimages/customs/38000/37944-1.jpg) Clawful |
![[Clawdeen (4 Month Old Cub)] Hey She-Ravers!
Here's Clawdeen as a cub.
A repaint of a LPS kitten. A lot of time went into painting this little dude. I love how he turned.
Now Catra has a cub of her own.
:)
Completed March 2012.
Thanks for looking. Enjoy!
:)](userimages/customs/38000/37701-1.jpg) Clawdeen (4 Month Old Cub) | ![[Evil Clawful] Posable figure of 80 vintage motu evil clawful !](userimages/customs/37000/36998-1.jpg) Evil Clawful |
![[Sabreclaw (Revengers)] Hudson Logan is the son of Wolverine on Earth-982(MC2). He is also the half-brother of Wild Thing. Strangely, he possesses claws and a healing factor more similar to Sabretooth's than his father's...
Sculpted head to toe,head modified,feet and hands came from warewolf figure,primer,tamiya and clear sealant finished off this figure..enjoy!!](userimages/customs/37000/36879-1.jpg) Sabreclaw (Revengers) Marvelby jazz04porcheHudson Logan is the son of Wolverine on Earth-982(MC2). He is also the half-brother of Wild Thing. Strangely, he possesses claws and a healing factor ...3 comments | ![[Real Metal Claws Wolverine Superhero Showdown] Repainted the crappy painted wolverine superhero showdown. Then installed real metal claws using safety pins. I hope Logan is happy with the modifications.
Thank you!](userimages/customs/36000/35675-1.jpg) Real Metal Claws Wolverine Superhero Showdown Marvel Universeby markdamalerioRepainted the crappy painted wolverine superhero showdown. Then installed real metal claws using safety pins. I hope Logan is happy with the modificat...2 comments |
![[Santa Claws] I took a King Pin figure and added the details with apoxie sculpt. The claws are made from a bobbi pin. The small mace at the end of his hat is from a weapon from a Peter Criss figure](userimages/customs/34500/34079-1.jpg) Santa Claws Marvel Legendsby 6700curtisI took a King Pin figure and added the details with apoxie sculpt. The claws are made from a bobbi pin. The small mace at the end of his hat is from a...9 comments | ![[Wolvie (Steel Claws)] Hey guys. Nothing much here. Used the x men classics wolvie. (thanks shino and xysma for telling me about the tutorial). Dug out the claws, which to my surprise were very straight! Used the bobby pin method. Painted the claws silver. Thanks.](userimages/customs/34000/33986-1.jpg) Wolvie (Steel Claws) |
![[Ultimate Wolverine: METAL CLAWS!] Soooo...
I love the Ultimate Series and Magneto is my favorite...blah blah blah...but YOU want WOLVERINE!
I've seen some of you guys and gals do AMAZING metal claw Wolverines and I wanted to get in on the game! So I took the UM Wolvie, and sculpted on his face. The Hasbro sculpt made him look like a 90-year-old-man. Well...I mean a NORMAL 90-year-old man.
So I filled in the wrinkles and added a some extra hair. Repainted the suit to match the early issues of Ultimate X-Men, and used the many metal claw examples you gave (plus some tips from Katosuki) to get those suckers in correctly.
This figure is so freaking poseable I couldn't load all the pics, but I'm VERY happy with the result. I'm adding metal claws and hair to the X2 movie Wolverine now too.
Critique away and thanks for looking!
-Fitz](userimages/customs/33000/32749-1.jpg) Ultimate Wolverine: METAL CLAWS! Marvel Legendsby fitzjediSoooo...
I love the Ultimate Series and Magneto is my favorite...blah blah blah...but YOU want WOLVERINE!
I've seen some of you guys and gals do AMA...17 comments | ![[Kaya Clarke (Wolfclaw) Dead Space Edition] This was made as a gift for my friend whose character is the daughter of Isaac and Nicole in the DS role playing game we do online. Oddly enough the DC Armory Power Girl looks a lot like Nicole from DS. I started with the basic figure and added parts from the DS 2 Isaac NECA figure such as the Rig on her back, her alternate head/helmet, the stasis unit, the kinesis unit and boot thrusters. I made alternate hands as well from various sources including some mechas. I made a custom Javelin gun (turned out so-so) and a custom plasma cutter a long with a storage box, shards of the markers from the 2 games, an Ishimura crew patch, and some other goodies. I painted the head's hair brown and added the new eye color. I had tried for an alternate head but it didn't work out so well and was scrapped for now. If i can find another head for her i'll make it. I modified the DS1 Ripper to fit in the hand slots of the one pair of hands I made. I also made 2 display bases for the figure. I also include](userimages/customs/33000/32706-1.jpg) Kaya Clarke (Wolfclaw) Dead Space Edition Dead Spaceby wesrThis was made as a gift for my friend whose character is the daughter of Isaac and Nicole in the DS role playing game we do online. Oddly enough the D...6 comments |
![[Wolverines (Metal Claws)] A simple exchange of two plastic claws WOLVERINEs, by metal claws.](userimages/customs/33000/32552-1.jpg) Wolverines (Metal Claws) | ![[Improved Clawful 200X Inspired (Classics)] The classics line pays homage to the vintage line however, many fans were not happy with the way Clawful was released, so i felt a little improvement was needed:
-New more menacing head from the 200X staction that does not look like a cartoon clown, instead he now looks like a much more menacing evil warrior!
-New crab-like shell sculpt on the back inspired in the looks of the staction.
-New belt and loincloth featuring Clawful's tribal logo on the belt
-MUCH BIGGER CLAW!! he is the warrior with the "grip of evil" but with that flimsy small claw he came with, he wasn't going anywhere, so I sculpted a much bigger and menacing claw that still articulates and can hold things.
-Newly designed feet, to better look like the staction, and also has newly sculpted shin guards. The paint used to detail the white sculpts, was a pearlescent white to resemble pearls.
-Combat worn shield with "Tribal" logo. It can be attached to clawful's left hand
-Grittier, dark](userimages/customs/32500/32493-1.jpg) Improved Clawful 200X Inspired (Classics) |
![[LION WARRIOR (Style Realm of the Claw)] Made with a Lion of McFarlane`s Twisted Land of Oz. Resculpted the whole body of the lion to cover the wounds, even changing his pose and putting it more upright, because the version of Uncle Todd is very curved. I painted full figure with matte vinylic paints using various tones superimposed (black, brown, caramel, etc. ...), drybrushing with the technique. Accessories and spare clothing / armor are remnants of several dolls. The base is the DC Direct Reativated, covered with sand and glue and then painted with vinylic paints.](userimages/customs/32500/32451-1.jpg) LION WARRIOR (Style Realm of the Claw) Originalby Leo CustomsMade with a Lion of McFarlane`s Twisted Land of Oz. Resculpted the whole body of the lion to cover the wounds, even changing his pose and putting it m...5 comments | ![[Bone Claw Wolverine] Just a guile with a wolverine select head, and bamboo skewers cut down and fixed to the hands. Just combined a few customs of wolverine I have seen and made a hybrid of it.Thanks for looking](userimages/customs/32000/31916-1.jpg) Bone Claw Wolverine Marvelby orypthedemonJust a guile with a wolverine select head, and bamboo skewers cut down and fixed to the hands. Just combined a few customs of wolverine I have seen an...2 comments |
|