![[Spidey Showdowns: Cloak & Dagger] This duo 1st appeared in a Spider-Man comic back in the early 80's, and they gave poor Spidey a run-for-his-money, so it was only fitting to include them in this series.
Made Dagger from a MU Ms Marvel, got rid of the mask, resculpted the face, added the light daggers cut from clamshell package. Cloak was a lil trickier to pull off. Wanted to design his cape with a billowing effect, so came up with this notion of combining two different ones - one from Count Dooku and the other a Helspont cape. The hood was sculpted from scratch and attached to the MU Surfer head instead of the cape, allowing some movement in the neck. The rest of the figure dangles in mid-air as the neck is sculpted firmly to the top of the cape.
Thanks for checking it out, make sure to make your customs! MAKE'EM!lol \ml](userimages/customs/50000/49687-1.jpg) Spidey Showdowns: Cloak & Dagger Marvel Universeby N TTThis duo 1st appeared in a Spider-Man comic back in the early 80's, and they gave poor Spidey a run-for-his-money, so it was only fitting to include t...9 comments | ![[Cloak & Dagger] These are two Marvel characters that dont get much love as action figures. I never really followed their comic history, but i would buy their figures if they came out in the MU line.
Cloak
Head - Gi Joe Renegades Ripcord
Body - MU Black Spider Man
Cape - MU Moonknight
Hood - Star Wars Vintage Collection Darth Maul
Dagger
Head - Gi Joe Roc Scarlett
Body - MU Secret Wars Spider Woman
Neck Jewel - Star Wars Yavin Medal
Thanks for looking and comments are welcome.](userimages/customs/40000/39675-1.jpg) Cloak & Dagger Marvel Universeby steve2477These are two Marvel characters that dont get much love as action figures. I never really followed their comic history, but i would buy their figures ...3 comments |
![[Cloak and Dagger] Cloak and Dagger](userimages/customs/35500/35323-1.jpg) Cloak and Dagger | ![[Cloak & Dagger] Sanded down all the parts to get smooth costume appearance. Sculpted Cloak's cloak. Citadel paints.](userimages/customs/29000/28850-1.jpg) Cloak & Dagger |
![[Cliff Dagger] I was happy to see MASK make a minor appearance in the 25th anniversary line of GI Joe figures recently. I did a repaint to make it a bit more realistic and less cartoony.](userimages/customs/26500/26253-1.jpg) Cliff Dagger G.I. Joeby SEAL Team Six CustomsI was happy to see MASK make a minor appearance in the 25th anniversary line of GI Joe figures recently. I did a repaint to make it a bit more realist...1 comments | ![[Cloak and Dagger] Hi, I think Cloak and Dagger are really cool so I decided to make a Marvel Universe scale for them. I hand painted both of them but I did use a little bit of clay on Dagger. They are ready to stop crime in New York hope you enjoy and your comments are always appreciated. Sorry for my finger in the way, my pictures are done by my close friend Galactape.](userimages/customs/24500/24306-1.jpg) Cloak and Dagger Marvel Universeby metroid primeHi, I think Cloak and Dagger are really cool so I decided to make a Marvel Universe scale for them. I hand painted both of them but I did use a little...0 comments |
![[G.I.Joe Frostbite with Ice Dagger] This custom was done a long time ago, had the chance to take some photos...a repaint of the ROC Ice Dagger vehicle. Frostbite was made with a Snowjob head and Frostbite ROC that comes with the ice dagger.](userimages/customs/23500/23081-1.jpg) G.I.Joe Frostbite with Ice Dagger G.I. Joeby rateegThis custom was done a long time ago, had the chance to take some photos...a repaint of the ROC Ice Dagger vehicle. Frostbite was made with a Snowjob ...4 comments | ![[Cloak & Dagger] Tyrone Johnson and Tandy Bowen were two teenage runaways that were experimented on by underworld chemists. They survived the process and gained superpowers; Tyrone could control darkness, and Tandy could harness light. Together, they called themselves Cloak and Dagger, and declared war on drugs and made it their mission to clean up the streets.
I made these two figures a while back, but touched up the paint recently. For Cloak, I used Kraven for the body, War Machine for the face, and Green Goblin for the hands. The cloak was made from vinyl on the outside, rubber on the inside. I then added another layer by using Wraarl's cape. For Dagger, the body and hair are from Black Cat, and the face is from Phoenix. The chest broach, earring, and eye circle were made from craft store junk. As usual, photos by Nara and myself. Thanks for looking, feel free to comment, and Make Mine Marvel!](userimages/customs/22000/21716-1.jpg) Cloak & Dagger Marvel Legendsby tommyxTyrone Johnson and Tandy Bowen were two teenage runaways that were experimented on by underworld chemists. They survived the process and gained superp...6 comments |
![[Cliff Dagger with Jack Hammer] I loved the M.A.S.K cartoon as a kid, and of course the toys too!
My favourite was the Jack Hammer Ford F150, which converted into a tank like armoured vehicle, with a spring loaded cannon on the back and the hood would slide up to create a bullet proof cover for the windshield.
The driver was Cliff Dagger, a muscle bound thug.
I always thought M.A.S.K would have been cooler if it was in scale with Gi Joe, so here is my update.](userimages/customs/22000/21682-1.jpg) Cliff Dagger with Jack Hammer M.A.S.K.by CriscoI loved the M.A.S.K cartoon as a kid, and of course the toys too!
My favourite was the Jack Hammer Ford F150, which converted into a tank like armour...2 comments | ![[Dark X-Men Cloak & Dagger] Marvel Select Cloak and Dagger with detailing sculpted with Apoxie Sculpt and painted with Citadel paints.](userimages/customs/18500/18018-1.jpg) Dark X-Men Cloak & Dagger |
![[Dagger] So while we were on holidays we found some toys for cheap at a few farmers markets… and one of them happened to be the Cloak and Dagger Marvel Select. So we got the idea to make them in 3 ¾” since we doubt they’ll make it to Wal-Marts shelves anytime soon.](userimages/customs/16500/16357-1.jpg) Dagger Marvel Universeby ivorygleamSo while we were on holidays we found some toys for cheap at a few farmers markets… and one of them happened to be the Cloak and Dagger Marvel ...1 comments | ![[Cloak & Dagger] The cape is from Moonknight. The Head is from a mc farlane toy serie (?don't know which?). I ve made the hair with green stuff from games workshop, the colours I use are also from games workshop.](userimages/customs/13000/12754-1.jpg) Cloak & Dagger Marvel Legendsby OLJA1The cape is from Moonknight. The Head is from a mc farlane toy serie (?don't know which?). I ve made the hair with green stuff from games workshop, th...3 comments |
![[Cloak and Dagger] Hi everyone,
CLOAK and DAGGER ML SCALE:
This duet of heroes was in my customs top list since I started to make customs. Don't ask me why, I don't know. Maybe because the Cloak was present in the Starlin/Perez Infinity Gauntlet, who knows.
So when action figures were editing in Marvel Select, I was glad. Their bodies were perfect, excepted their heads, to big. I had to find only 2 smaller heads. One of them was MGS Sniper Wolf with painted hair for DAGGER and the other one, ML Blade for CLOAK.
Easy but efficient. But very easy...
I hope you enjoy.](userimages/customs/10500/10384-1.jpg) Cloak and Dagger Marvel Legendsby FrenchtouchHi everyone,
CLOAK and DAGGER ML SCALE:
This duet of heroes was in my customs top list since I started to make customs. Don't ask me why, I don't kno...0 comments | ![[Cloak & Dagger] Dagger stands 6.5 inches tall (8 inches, including the hair) and was made from a Purgatori fig. Her head was from a Hush Poison Ivy fig. with new hands and hair sculpted with apoxie. Her accessories include a necklace, an earring and her light daggers for prop.
Cloak stands 7 inches tall and measures approx. 10 inches wide. His cloak was created using plastic from a clamshell package, and cut out to resemble a flowing, living cloak. Some minor sculpting to cover the seams (and reinforce the shape), but most of it was left as is. The figure inside was borrowed from a Mcfarlane Ron Artest fig. and was sculpted to remain firmly attached to the costume. The figure is unmoveable but both arms remain poseable and can swivel. An opening was cut on the inside of the cloak, for the shoulder socket to rotate. Finished in acrylic.
It's a privilege to showcase these works with so many other amazing Customizers, all specialists at providing eye-candy. Hells bells, it ain't easy being you judges.](userimages/customs/4000/3703-1.jpg) Cloak & Dagger Spider-Manby N TTDagger stands 6.5 inches tall (8 inches, including the hair) and was made from a Purgatori fig. Her head was from a Hush Poison Ivy fig. with new hand...12 comments |
![[Cloak & Dagger (Version 2)] This is a second version of a custom of "CLOAK & DAGGER",and my second custom in series of good b-list Marvel Heroes(SleepWalker was the first). As I said this is my second version of this custom & I like them alot more because I used a better cape (MoonKnight's) for Cloak and Psylocke is a easier base figure to use for Dagger. Now I got to get back to finishing up my custom of Darkhawk.](userimages/customs/2000/1776-1.jpg) Cloak & Dagger (Version 2) Marvel Legendsby JakeThis is a second version of a custom of "CLOAK & DAGGER",and my second custom in series of good b-list Marvel Heroes(SleepWalker was the...4 comments | |
|