![[Gorgon] The base was the MU Punisher, virtually all resculpted with epoxy. Painting with matte vinylic paints and a little enamel silver.](userimages/customs/49500/49497-1.jpg) Gorgon | ![[Gorgon] This was another of my entries for last winter's Custom Con. He's mostly SOTA Guile, with wrestling figure hands, X3 Juggernaut feet and a Mr. Sinister head. The collar and headpiece are styrene, and the shoulder wrap is from Dr. Strange's cape.
He was pretty simple to put together, until it came to the legs... The haunches are fodder limbs, sculpted over, and I added new-style rocker joints in the feet.
The base is foamboard, with the backing removed and the texture carved & scored in - he can stand without it, but looks much better on it!](userimages/customs/46500/46067-1.jpg) Gorgon |
![[Gorgon] This is a commissioned piece from about a year ago based on Gorgon from Hydra. The buyer wanted him in his red and white robes so i used a Gandalf base with a Kazar headcast and a few TMNY swords. enjoy!](userimages/customs/45000/44680-1.jpg) Gorgon Marvel Legendsby da manThis is a commissioned piece from about a year ago based on Gorgon from Hydra. The buyer wanted him in his red and white robes so i used a Gandalf ba...5 comments | ![[Gorgon] It's not everyday that a figure is made for an Asian character. Gorgon is one of them and i think he is a badass enough to merit his own figure i wanted his red suit stand out so i had it painted as deep as possible,as for the accessories i opted to give him his signature sword and shades..Hope you like it realmers](userimages/customs/43000/42684-1.jpg) Gorgon Marvel Legendsby L/R CustomsIt's not everyday that a figure is made for an Asian character. Gorgon is one of them and i think he is a badass enough to merit his own figure i want...21 comments |
![[Gorgon] GORGON
head-hercules
body-wwe
legs-mc farlane
belt-narnia
stripes-lotr
fabric
leather
aluminium paper
my own interpretation of inhuman Gorgon](userimages/customs/36000/35603-1.jpg) Gorgon Marvelby megatrooperGORGON
head-hercules
body-wwe
legs-mc farlane
belt-narnia
stripes-lotr
fabric
leather
aluminium paper
my own interpretation of inhuman Gorgon...5 comments | ![[Gorgon (Inhumans)] Made for a friend. herc base, cut off front of feet, sculpted inverted hoof, then re-tooled the ankle joint for a large rotation range. this worked perfectly, stands up great. when fully upright he is around 8+ inches tall. really great poseability on the legs. i ground down the leg bands, except for the part i needed for gorgon, i cut down the skirt, removed herc symbol. sculpted "fabric" on shoulders, and lines on chest cowl is modded from mr sinister, and scultped around. sculpted more facial hair and headress/mask.](userimages/customs/30500/30355-1.jpg) Gorgon (Inhumans) Marvel Legendsby PAINTcustomsMade for a friend. herc base, cut off front of feet, sculpted inverted hoof, then re-tooled the ankle joint for a large rotation range. this worked pe...4 comments |
![[The Hand's Gorgon] Hello. Next is a custom I have been sitting on for a while, but he's ready to make someones collection bigger and deadlier haha. Ripclaw head, Hand body, Neca Ninja Gaiden swords, yes 2! Also Gaidens feet. Filled holed in the back of the head with sculpting putty from Aves and some paint over a Ronin jacket. Hope ya dig! Take care.](userimages/customs/27000/26641-1.jpg) The Hand's Gorgon Marvel Legendsby Comicustoms!Hello. Next is a custom I have been sitting on for a while, but he's ready to make someones collection bigger and deadlier haha. Ripclaw head, Hand bo...2 comments | ![[Gorgon] Base figure is AOA Sabertooth. Arms from elbow down are Lord Thor. Legs from lower knee joint are from a Doctor Who werewolf. The hooves were made from several layers of styrene sheet with an Apoxie skin, and the hair and shoulder wrap thing are a blend of Apoxie and Kneadatite - not as flexible as B-Yellow, but enough for my needs. The collar and headpiece are styrene sheet. The head's a TNA Kevin Nash, with the nose resculpted.
He actually came together pretty easily - I hollowed out the lower part of Sabertooth's legs to fit the werewolf legs, and reinforced those with brass rods. I would have liked to have been able to put rocker joints in the feet, but the design made it unfeasable. All in all though, I'm very happy how he turned out.](userimages/customs/26000/25629-1.jpg) Gorgon |
![[Gorgon] Randy Orton and tons of sculpt, tons of hours, tons of paint, and tons of patience ! This figure beat me up !](userimages/customs/23000/22697-1.jpg) Gorgon | ![[Inhumans - Gorgon Mcguinness Style] There's not much left of J'onn J'onzz underneath all that sculpt and paint, but this base figure was the largest in the series to make Gorgon.
A piece of clamshell plastic was cut and fitted over the shoulders. Sculpt work was then done overtop to create the clothing piece. Having the plastic as base kept the clothing in shape (while sculpting) and also helped retained articulation in the shoulders (by separating the apoxie from being applied directly to the figure). Replaced the hands from a WWE, used a collar from Spawn, and the hooves from a Mcfarlane Dojo. The hard part was trying to attach the hooves in such a way that still allowed the figure to stand upright on its own. Some minor sculpt in the heels to balance it out. Will have Medusa ready by the break of dawn!](userimages/customs/22000/21764-1.jpg) Inhumans - Gorgon Mcguinness Style DC Directby N TTThere's not much left of J'onn J'onzz underneath all that sculpt and paint, but this base figure was the largest in the series to make Gorgon.
A piece...2 comments |
![[Inhumans Gorgon (Complete)] Hello. I swapped the hands from my w.I.p. Gorgon with DC U Atom Smashers right fist and Desperos right open hand. Dremmeled out the inside of the wrists, heated the plastic and popped in the new hands. No more Akuma hands. The Hooves are sculpted over Man-Bat feet. Did a few more color washes with flesh, brown and burnt orange. I may add the black squares and lines down the front of his costume. Only thing I think is missing. Back to Extremis Ironman... thanks for looking and take care.](userimages/customs/20500/20072-1.jpg) Inhumans Gorgon (Complete) Marvel Legendsby Comicustoms!Hello. I swapped the hands from my w.I.p. Gorgon with DC U Atom Smashers right fist and Desperos right open hand. Dremmeled out the inside of the wris...5 comments | ![[(W.I.P.) Inhumans Gorgon] Hello. Where do I begin on this one? I started with Akuma, swapped on Ken's legs, DC U Man-Bat feet, DC U Captain Cold's shouler cloth, sculpted around the edge of his poncho thingy, sculpted collar, beard, over where the ponytail was, sculpted around the Man-Bat feet until they resembled hooves. Cut the lower half of M. Bisons jacket off and put it around Gorgons waist, then added a black foam strip to make a belt. Sculpted a cuff around the top of his boots and used Ninja Gaidens head gear. Orange and brown and brown color scheme with some dark tones and highlights thrown in.
I still need to add the lines and squares down the front of his legs. Down the fron of his torso also. Im looking for some fists to swap also but I think Savae Dragons will do Still a w.I.p. (work in progress).
Hope you like where it is so far.](userimages/customs/20000/19790-1.jpg) (W.I.P.) Inhumans Gorgon Marvel Legendsby Comicustoms!Hello. Where do I begin on this one? I started with Akuma, swapped on Ken's legs, DC U Man-Bat feet, DC U Captain Cold's shouler cloth, sculpted aroun...8 comments |
![[Gorgon] This for some reason was a figure I've been wanting to do for a while. But yet couldn't find the right figure until now. I like to use the wwe figures because they usually have a lot of expressions on there face. And in my opinion that is one thing that marvel figures are lacking. On this gorgon I sculpted the beard, hair, pants, shirt wrinkles on his shoulders, and lowere shirt. I also added the leg lines with sinister bands. I also made his crown using tooth paste tubing, the rest was a steady paint job. Let me know what you all think, and as always thanks for looking. I always enjoying hearing the positive feedback from my peers.](userimages/customs/17500/17405-1.jpg) Gorgon Marvel Legendsby GOLIATH_CUSTOMSThis for some reason was a figure I've been wanting to do for a while. But yet couldn't find the right figure until now. I like to use the wwe figures...4 comments | ![[Inhumans: Gorgon] Gorgon general of the Inhumans
Upper Body- Savage Dragon
Upper legs- Wolverine Marvel Legends series III
lower legs- Minotaurs Caspian Prince Narnia movie
epoxy clay sculpt](userimages/customs/10500/10026-1.jpg) Inhumans: Gorgon Marvel Legendsby churichuroGorgon general of the Inhumans
Upper Body- Savage Dragon
Upper legs- Wolverine Marvel Legends series III
lower legs- Minotaurs Caspian Prince Narnia ...4 comments |
![[Gorgon] Gorgon from the greek myths like Medusa. Made from the adult superstars figure Briana Banks and the LOST Shannon. Added snakes, fur, wings, and a whole lot of paint. Of all the figures I have created the gorgons took the longest. This was my first gorgon.](userimages/customs/4500/4492-1.jpg) Gorgon Creaturesby ImmacolataGorgon from the greek myths like Medusa. Made from the adult superstars figure Briana Banks and the LOST Shannon. Added snakes, fur, wings, and a whol...2 comments | ![[Gorgon] Another Inhuman custom and this time it’s Gorgon (3 down, 3 to go). I used a Hasbro ML Hercules as the base. The toughest part had to be cutting off all those straps on his legs and manually sanding it down (still too poor for Dremel). I also had to cut those straps that were covering his ears so that I could sculpt some ears to begin with. The WIP picture shows what I had to sculpt, and the rest is just paint job. Thanks for looking and please comment.](userimages/customs/4500/4246-1.jpg) Gorgon Marvel Legendsby NeoZeRo35Another Inhuman custom and this time it’s Gorgon (3 down, 3 to go). I used a Hasbro ML Hercules as the base. The toughest part had to be cutti...3 comments |
|