![[Iron Spider] The Iron Spider figure wasn't a good base figure to start with, I mean it had some good aspects but overall it wasn't very good. I thought I should at least give it a decent paint job. I gave him a darker red and gold done in paint pen. The arms were made out of layers of wire wrapped around each other and the ends of the original arms were put into place.](userimages/customs/50500/50016-1.jpg) Iron Spider Spider-Manby BluehawKThe Iron Spider figure wasn't a good base figure to start with, I mean it had some good aspects but overall it wasn't very good. I thought I should at...2 comments | ![[Iron Spider-Man] Hello again Realmers! Im here with yet another Spiderman Custom created from the BigTime Spidey ML figure. This time i present Iron Spider-Man.
The Chest logo, arm cuffs, ankle cuffs, and back piece were sculpted with Aves. The Spider Leg arm things were created using the legs from a StarWars spider assassin droid. I cut up the legs in various locations and re attached them to create 2 points of articulation instead of just the 1 original point. By doing that it extended the length of the legs as well. After that i attached some small ball joints i purchased from BBTS to the legs and back of the figure as shown in the picture. Once all that was complete i dolled him up with a fitting paint job and Wala!](userimages/customs/49500/49077-1.jpg) Iron Spider-Man Marvel Legendsby TextureMeHello again Realmers! Im here with yet another Spiderman Custom created from the BigTime Spidey ML figure. This time i present Iron Spider-Man.
...27 comments |
![[Iron Spider] Iron Spider! I received a IronMan Figure and had some random claws and legs laying about and figured why not.](userimages/customs/47500/47470-1.jpg) Iron Spider | ![[Iron Spider-Man] This is my favorite armor that Pete has put on, but the figure they put out was horrible. I took and shaved down the head and eyes and re-sculpet them. The hands where another issue. I replaced his arms with that of Black Lantern Abin Sur. Added some sculpy to the chest to help fill out the symbol and repainted him.
Check me out on Facebook at Happy Day Customs to check out any of my current projects.
Hope you enjoy.](userimages/customs/47000/46574-1.jpg) Iron Spider-Man |
![[Iron Spiderman] one of my early custom, sculpted the spider symbol,swapped the head with iron spiderman hasbro, and added the claw to his back. the claws are removable
hope you like it
cheers!](userimages/customs/44000/43908-1.jpg) Iron Spiderman Marvel Legendsby spidey_mvcone of my early custom, sculpted the spider symbol,swapped the head with iron spiderman hasbro, and added the claw to his back. the claws are removabl...12 comments | ![[Iron Spiderman Chibi Version] Made from luffy one piece figure. The entire figure is sculpted from head to feet, the iron legs are from marvel universe iron spiderman. Hope you like it guys!](userimages/customs/44000/43503-1.jpg) Iron Spiderman Chibi Version Spider-Manby toymancustomsMade from luffy one piece figure. The entire figure is sculpted from head to feet, the iron legs are from marvel universe iron spiderman. Hope you lik...7 comments |
![[Iron Spider-Man] Here's a Minimate Iron Spider-Man custom with an MU Iron Spider-Man tendrils.](userimages/customs/39000/38530-1.jpg) Iron Spider-Man | ![[Iron Spider Man (Concept)] This is my version of the uniform of the iron spider man, in fact the only differences are the eyes (never liked the golden eyes) and web-shooters.](userimages/customs/33000/32551-1.jpg) Iron Spider Man (Concept) Marvel Universeby LonerobThis is my version of the uniform of the iron spider man, in fact the only differences are the eyes (never liked the golden eyes) and web-shooters....2 comments |
![[Iron Spider] Marvel Civil War Iron-Spider
Base - Hasbro Black Spider-Man
Head - Hasbro Iron-Spider
How I made -
Sculpted magnets into his hands, feet, and back. The golden arms are removable and hold strong with magnets. Switched the heads and sculpted the iron spider symbols. Strengthened and added sculpt to the gold arms then used dremel to sharpen. Painted with silver and red mixes. Finished with hard coat gloss. He is very durable flexible and heavy.
Iron-SPIDER](userimages/customs/30500/30250-1.jpg) Iron Spider Marvel Civil Warby toxinvenomMarvel Civil War Iron-Spider
Base - Hasbro Black Spider-Man
Head - Hasbro Iron-Spider
How I made -
Sculpted magnets into his hands, feet, and back...8 comments | ![[Iron Spider] I had the Iron Spiderman, it had no paint job and looked like plastic.
I repainted him and gave him a hard coat gloss finish.
It really took me a while to like this version of Peter Parker.](userimages/customs/20500/20090-1.jpg) Iron Spider Spider-Manby toxinvenomI had the Iron Spiderman, it had no paint job and looked like plastic.
I repainted him and gave him a hard coat gloss finish.
It really took me a w...7 comments |
![[Iron Spider-Man (Animated)] This is an iron spider-man made from an animated spidey. For the most part the body is a repaint. The legs are from the animated doc ock. The hard part was determining how the legs would be joined together and attached to spidey's back. I found a small, cheap paint container, trimmed it down and cut 3 holes so the legs would lie down snug in it. I put superglue on the bottom, a wad of liquid nails over that, pushed the legs into the glue, and put more superglue in every crevice. Worked pretty well. I carved just a bit into spidey's back (just enough to make a flat spot) so a magnet would fit. I put the other magnet, of course, on the piece that attaches the legs to his back. I'm most happy with the color of the red that mixed.
I learned one hard lesson - apparently liquid nails expands a tad, and trimming it down is like trying to trim steel lolz. I'll remember that next time, so there's a tiny bit showing under the magnet. I'll fix that when I get a new bit to slowly bore it away. Bt](userimages/customs/19500/19137-1.jpg) Iron Spider-Man (Animated) Spider-Manby foxfanThis is an iron spider-man made from an animated spidey. For the most part the body is a repaint. The legs are from the animated doc ock. The hard par...5 comments | ![[Iron Spider] The final figure from my CustomCon24 entry.
Peter Parker takes off his mask for all the world to see and with support from Iron Man, dons the Iron Spider suit! The suit has 4 mechanical legs to help Peter in his fight against crime, and Peter has suprises of his own up his sleeves: super strong spider stingers that can knock out bad guys!
Iron Spider comes with an alternate, unmasked head, 4 magnetic spider attack legs, a magnetic backpack and 2 spider stingers.
Now, this was more of a challenge. The main figure was pretty easy and the only thing that's a little interesting about it is that I painted it silver and then coated it with a transparent red to get that shiny metallic red effect.
I also put magnets in the palms of his hands so that I could attach his 'spider stingers.'
Image
Scarlet Spider, Ben Reilly and Iron Spider all use the head from a Marvel Legends Longshot figure. As they are meant to be genetically identical, I thought it appropriate to use the same base head fo](userimages/customs/19000/18686-1.jpg) Iron Spider Marvel Legendsby warrackThe final figure from my CustomCon24 entry.
Peter Parker takes off his mask for all the world to see and with support from Iron Man, dons the Iron Sp...5 comments |
![[Iron Spiderman] I took a ML Icons Spiderman & repainted it and added the tentacles.](userimages/customs/18000/17808-1.jpg) Iron Spiderman | ![[Iron Spider-Man] I bought the original iron spider-man online and was very disappointed at it. I only wanted it to enhance its originaly extra arms but the reality of it is that the whole figure just sucked. So instead, I made my own iron spider and will just have to make its extra arms out of scratch.
I used various references to complete the look of iron spider-man. There was the bust, comic books, fan art, and the original figure. Started with captain marvel as a base. ripped off the head and forearms. LCBH star head, bullseye forearms, original iron spider hands. sculpted over the forearms, sculpted the legs, the bottom of star's eyes, and of course the insignia. painted the forearms and the shoulders gold. For the color, I did the metallic look, primed in black then based in silver and finally clear red.
Soon, if I find the right formula and materials, I'll add on his spiderlegs.](userimages/customs/17000/16626-1.jpg) Iron Spider-Man Spider-Manby abeamI bought the original iron spider-man online and was very disappointed at it. I only wanted it to enhance its originaly extra arms but the reality of ...5 comments |
![[Iron Spider] head: spiderman
body: daredevil classic spiderman
emblem, boots, wrist, arm and eyes: putty epoxy](userimages/customs/15500/15145-1.jpg) Iron Spider | ![[Iron Spiderman, Black Ops Ironman, Stealth Ironman] Spiderman was a repaint of animated Spiderman using Citadel Scab Red and Folk Art metallic gold. Black Ops Ironman was created from the movie Ironman figure, and was repainted with black and silver Sharpies. Stealth Ironman was a movie Ironman and was repainted with Folk Art Blue Metallic Sapphire. The armory was hand built out of wood cut to size and was painted with sterling silver spray paint. Mirrors were added for the base of the diorama.](userimages/customs/13000/12890-1.jpg) Iron Spiderman, Black Ops Ironman, Stealth Ironman Iron Manby MadnehyraSpiderman was a repaint of animated Spiderman using Citadel Scab Red and Folk Art metallic gold. Black Ops Ironman was created from the movie Ironman...0 comments |
![[Iron Spiderman] I liked the first iron spiderman that came out but the gold part was yellow so I repainted the yellow gold](userimages/customs/11500/11100-1.jpg) Iron Spiderman | ![[Iron Spider] When I saw Boskoes version of this, my face nearly fell off. I thought the Hasbro Spiderman Origins was a big disappointment for such a rockin' suit! Needless to say, I missed out on their auction; so you can imagine my excitment when I saw this toy line in our local Games 401.
Ryan hacked off the original arms/legs and replaced them with some much nicer articulated ones from a ML Spiderman. A little apoxie sculpt for the eyes and then paint, paint, & more paint!](userimages/customs/8500/8170-1.jpg) Iron Spider Marvel Legendsby ivorygleamWhen I saw Boskoes version of this, my face nearly fell off. I thought the Hasbro Spiderman Origins was a big disappointment for such a rockin' suit! ...5 comments |
![[Iron Spider-Man] Spider-Man Animated Series: Black Costume Figure
Legs from Star Wars Tri-Pod Droid
Used Model Master Acrylic Flat Black as a base coat, dry-brushed everything with Testors MM Silver and applied several coats of Tamiya Clear Red and Yellow.](userimages/customs/8000/7723-1.jpg) Iron Spider-Man Spider-Manby core-customsSpider-Man Animated Series: Black Costume Figure
Legs from Star Wars Tri-Pod Droid
Used Model Master Acrylic Flat Black as a base coat, dry-brushed e...1 comments | ![[Animated Iron Spider Man] So I seen the cool new Spidey Figures and had to do something with one.
I decided to use the Amored Spidey and make an animated version of the Iron Spider. I removed the 2 mini arms and the 2 large arms form the front. I sculpted over the new holes and created a new arm port in the back. I resculpted over each of his feet and forearms to match the original look of the figure. I was going to sculpt over the web lines but decided to keep them to make him different from the original and keep the animated "armor feel". I did go over the eyes to make it more bugish however.
Painted him black then silver then with the clears! TADA animated Iron Spider](userimages/customs/8000/7701-1.jpg) Animated Iron Spider Man Spider-Manby ShinobitronSo I seen the cool new Spidey Figures and had to do something with one.
I decided to use the Amored Spidey and make an animated version of the Iron S...2 comments |
![[Iron Spiderman] So, fun with epoxie.
I painted the whole figure silver after shaving down his belt, wrist and shin cuffs. Then, I sculpted the gauntlets and bracers and the chest spider out of epoxie and painted that silver. Then, I went to town with red and yellow Citadel Color ink, which was a pain to apply but worked out okay.
-M](userimages/customs/6000/5536-1.jpg) Iron Spiderman Marvel Legendsby solorioSo, fun with epoxie.
I painted the whole figure silver after shaving down his belt, wrist and shin cuffs. Then, I sculpted the gauntlets and bracers...4 comments | ![[Iron Spider] wanted a more realistic spidey suit. This is what I think spideys iron suit should look like also what he would wear even after he traded to caps side](userimages/customs/5500/5468-1.jpg) Iron Spider Spider-Manby mattluttonwanted a more realistic spidey suit. This is what I think spideys iron suit should look like also what he would wear even after he traded to caps side...1 comments |
![[Stealth Iron Spider-Man] AREZ' STEALTH IRON SPIDER-MAN DOB 11/23/07
This is the new addition guys, hope you dig him. STEALTH IRON SPIDER-MAN, I don't need to post any recipe, because it is too obvious what figure I used. Any comments, critics, and suggestions are WELCOME!!!
Thanx for looking!!!](userimages/customs/5500/5153-1.jpg) Stealth Iron Spider-Man Spider-Manby AREZAREZ' STEALTH IRON SPIDER-MAN DOB 11/23/07
This is the new addition guys, hope you dig him. STEALTH IRON SPIDER-MAN, I don't need to post any recipe...6 comments | ![[Iron Spider] Okay where we go... I was browsing at a rummage sale and I found these spider legs looking things, and the idea popped into my head. I could use em or a Iron spider man! and this is the end result. Repainted the who figure, even the long legs. Glued the legs on the back, and used apoxie sculpt to cover up the gaps. Awesome figure addin those legs gave it more posing possibilities. Fun figure to make.](userimages/customs/5000/4970-1.jpg) Iron Spider Marvel Legendsby markiemarkyOkay where we go... I was browsing at a rummage sale and I found these spider legs looking things, and the idea popped into my head. I could use em or...1 comments |
![[Iron Spider] Well, i really think that the hasbro iron spider really sucks, so i made my own with some spiderman from the classics line, the hard aprt was sculpt all the deatils from his armor, i like to hear yor opinion.](userimages/customs/3500/3132-1.jpg) Iron Spider Marvel Legendsby thejoemxWell, i really think that the hasbro iron spider really sucks, so i made my own with some spiderman from the classics line, the hard aprt was sculpt a...5 comments | ![[Iron Spider Man Variant] well I was curiouse to see how he would look black and white like a symboit spider man](userimages/customs/2500/2258-1.jpg) Iron Spider Man Variant |
![[Iron Spider-Man] this repainted yellow golden based on the "hasbro IRON SPIDER-MAN",
and lengthened the IRON ARM.](userimages/customs/2500/2108-1.jpg) Iron Spider-Man Spider-Manby toxinthis repainted yellow golden based on the "hasbro IRON SPIDER-MAN",
and lengthened the IRON ARM....3 comments | ![[Civil War Iron Spider-man] After the shocking events in "The Other" storyline, Peter recieves this new costume to help him adjust to his newest developments, as well as giving him some added muscle! The iron spidey also appeared in "Civil War" storyline as well.
The new costume was designed by Joe Quesada. I like the new design very much. I used the spider-man from Urban Legends to build this iron spidey. Hope you guys like it.](userimages/customs/1000/780-1.jpg) Civil War Iron Spider-man Spider-Manby Hunter RAfter the shocking events in "The Other" storyline, Peter recieves this new costume to help him adjust to his newest developments, as well a...13 comments |
|