![[Lockjaw] This was probably the most difficult custom I've ever made, not to mention time consuming - 2 1/2 years from start to finish! I was originally going to use the Little Nicky bulldog that most people use for Lockjaw, with the intention of adding articulation. When I got it I found it was hollow, and thus useless - I would have to build him myself!
He's essentially a full sculpt over a fodder skeleton with resin cast feet. Most of the joints were transplanted from other figures, but the hips (rear shoulders? Whatever they're called on a dog) and ankles were scratchbuilt. All in all, he's got ball & socket ankles & torso, cut shoulders and a swivel/hinge neck - more than enough.
He's not perfect - I'd love to go back and make an improved version, if I had the time & money - but he's good enough for my display!](userimages/customs/46500/46070-1.jpg) Lockjaw | ![[Lockjaw 2.0] I made a mold of my modified Mr. Beefy and cast it in brown and tan plastic then painted him. I used an original sculpt and molded and cast it for the tuning fork on the head. I'll be using the Elektra Sai trick in the future.](userimages/customs/44000/43985-1.jpg) Lockjaw 2.0 Marvel Legendsby BotCustomsI made a mold of my modified Mr. Beefy and cast it in brown and tan plastic then painted him. I used an original sculpt and molded and cast it for the...6 comments |
![[Apocalypse, Lockjaw, and Ultron] so i put these in the marvel universe category, because i wanted a larger apocalypse for my little guys to actually worry about. ultron was just a black-wash but he is a robot so he can be any size right? apocalypse and lockjaw are heavily sculpted, i think i'll make apocalypse thicker, he needs it. and i used wildmutt as a base for lockjaw cause i wanted a more alien looking lockjaw. plus his jaw moves.](userimages/customs/42500/42133-1.jpg) Apocalypse, Lockjaw, and Ultron Marvel Universeby Mutation92so i put these in the marvel universe category, because i wanted a larger apocalypse for my little guys to actually worry about. ultron was just a bla...2 comments | ![[Lockjaw] We have a hard time looking for a dog figure so we opted to used instead a apa figure from the movie legend of ang air vender. We removed the middle legs and sculpted the entire figure to make it look like a giant dog from inhuman, well we hope you like it guys!](userimages/customs/37000/36952-1.jpg) Lockjaw Marvelby toymancustomsWe have a hard time looking for a dog figure so we opted to used instead a apa figure from the movie legend of ang air vender. We removed the middle l...10 comments |
![[Lockjaw] HAHA im a copy cat!!! lots of great ones out there, i found the dog for $5 bucks! cant go wrong, and they have more!! Redid the whole back leg thing, basically lined the removed half up, ground it a bit, and heated with a heat gun and then blasted with cold water in the shape i wanted, if u haven't done this, i suggest doing it with all rubber.](userimages/customs/34000/33793-1.jpg) Lockjaw Marvel Legendsby PAINTcustomsHAHA im a copy cat!!! lots of great ones out there, i found the dog for $5 bucks! cant go wrong, and they have more!! Redid the whole back leg thing, ...3 comments | ![[Lockjaw] I needed to make a Lockjaw figure and was told to check out the Little Nicky dog. The problem was that the dog's leg was cocked up in the air as if urinating and featured some kind of urine missile, which would never do. So I clipped off the leg and repositioned it and resculpted the leg to make it look more natural. I didn't get the repositioning perfect, but by the time it mattered it was too late. Sooo, one of his hind legs doesn't reach the floor, but he balances just fine. I used an Elektra sai for the tuning fork on the head. Painted using normal artist brushes as well as my trusty sidekick airbrush.](userimages/customs/30000/29505-1.jpg) Lockjaw Marvel Legendsby BotCustomsI needed to make a Lockjaw figure and was told to check out the Little Nicky dog. The problem was that the dog's leg was cocked up in the air as if ur...2 comments |
![[Lockjaw] Took a Lil Nicky DOg and neutered him. cut off his left leg because it was positioned in a peeing position. resculpted it on to look like hes standing on all fours. dremeled off his collar and sculpted to match his fur. sculpted his antennae and then full paintjob](userimages/customs/28000/27795-1.jpg) Lockjaw Marvel Legendsby Eniam_RejTook a Lil Nicky DOg and neutered him. cut off his left leg because it was positioned in a peeing position. resculpted it on to look like hes standing...1 comments | ![[Lockjaw] To go with my Machine Man custom, I made a base with a zombified Lockjaw (capturing a scene from Marvel Zombies 3).
As with many Lockjaw cutoms, he's made from a Little Nicky Mr. Beefy, with the action features removed and the left side of his face hacked off and resculpted to show his teeth and torn flesh. After repainting, hot glue was added and painted with Tamiya clear red to get that gory bloody effect.
Hot glue and Tamiya clear blue was added to his sculpted antennae to represent a teleporting energy effect.](userimages/customs/22000/21656-1.jpg) Lockjaw Marvel Legendsby warrackTo go with my Machine Man custom, I made a base with a zombified Lockjaw (capturing a scene from Marvel Zombies 3).
As with many Lockjaw cutoms, he's...2 comments |
![[Lockjaw] Hi, friends present lockjaw, body is macfarlane dog, head changes with procreate and imagination.
Check!!](userimages/customs/20000/19681-1.jpg) Lockjaw | ![[Lockjaw] For this guy I had to sand off the collar and resulpt parts of the neck, underbelly, and most of the back leg. I also had to gut a bunch of electronic parts from his insides and replaced them with 6 siders. Then if was just a matter of a paintjob with some drybrushing to make the fur pop, and inserting the antenna which was made from Aves. That's it.](userimages/customs/19000/18688-1.jpg) Lockjaw Marvel Legendsby Green SkinFor this guy I had to sand off the collar and resulpt parts of the neck, underbelly, and most of the back leg. I also had to gut a bunch of electroni...2 comments |
![[Lockjaw] I had to make Lockjaw if I was making the Inhumans, so he is a repainted Bulldog with the thing on his head made from sculpty. It is removeable to avoid breakage.](userimages/customs/17000/16602-1.jpg) Lockjaw Marvel Legendsby da manI had to make Lockjaw if I was making the Inhumans, so he is a repainted Bulldog with the thing on his head made from sculpty. It is removeable to av...5 comments | ![[Lockjaw] It had to be done! He's crying out for BAF treatment or at least a boxset deal like Zabu now that Blackboltis due. I removed the cocked leg and... well... castrated him. Rebuild the hind leg from scratch over the period of about 3 months with bits of left over Apoxie from my other customs. Dremmelled away the collar and rebuilt his scruff and ised twisty ties painted silver and bored into his head for the fork/antanae. No POA whatsover but cool as polar bear poo!](userimages/customs/11500/11190-1.jpg) Lockjaw Marvel Legendsby WingsIt had to be done! He's crying out for BAF treatment or at least a boxset deal like Zabu now that Blackboltis due. I removed the cocked leg and... wel...6 comments |
|