![[Stealth Man-at-Arms] This is my 3rd Concept Figure
"The electrical powers of Eternia begin to diminish as a cosmic eclipse grows near. Worried that the Masters of the Universe may be vulnerable if the planet is without light or power, King Randor calls upon Man-At-Arms. The king requests that stealth armor be created for the defenders of the palace, and reserves of crystals be stored for future energy conversion. Duncan finishes the armor just as the planet is plunged into darkness. Fighting the forces of Skeletor with stealth armor, the Masters of the Universe battle to keep Eternia out of the clutches of the Lord of Destruction. Man-At-Arms utilizes Corodite, and Melatose crystals to power the suits of armor. Armed with a blaster cannon, laser pistol, electronic mace, and a host of other weapons, Man-At-Arms is ready to battle whatever comes his way."
This figure is created using a Snake MAA buck and right arm; original MAA left arm; Duncan Variant Head; 200x Cannon; sculpted elements using](userimages/customs/47500/47002-1.jpg) Stealth Man-at-Arms | ![[Man-at-Arms] Did this one a few months ago, but never got around to posting it. I love the new MOTUC figures but can't see shelling out big $$ for 'em so I make my own! Wrestler dude body with Hercules head, Sculpey and fodder weapons. Thanks!](userimages/customs/44500/44425-1.jpg) Man-at-Arms |
![[Custom Man-at-Arms] After seeing some incredible characters based off of the Bullet Storm figure I decided to give it a try too. I replaced the original head with wrestler John Cena and sculpted the helmet with super sculpey and took the Man-At-Arms figure from the 2002 line and kit bashed that for pieces. I then repainted the whole figure and now have a new design for Master Of The Universe. I hope you like it!](userimages/customs/38000/37567-1.jpg) Custom Man-at-Arms | ![[Man-at-Arms (MOTU Hybrid)] Time for another MOTU Hybrid figure! I've only got one more hero left (completed and photographed . . . I've got others finished, and even more on the work table, but for now, this is it for the good guys), so I figured I'd get him out of the way. If you've been paying close attention to my work thus far, specifically Teela, then you already know who my next entry is, so without further ado, please welcome the mustachioed master mechanic, magnificent military mind, and manly muscled mentor, Man-At-Arms!
MOTU Hybrid is my attempt to unify the best of all three MOTU eras. The ideas (i.e. color schemes and concepts) of the original cartoon, the sculpts of the 2002 toys, and the articulation of modern figures, at a far more reasonable cost. Unlike Orko, Battle-Cat, and the ladies, Man-At-Arms was pretty straightforward. Just like He-Man and Skeletor, I took an existing 2002 figure, cut it in strategic locations, hollowed out the limbs, and inserted the necessary hinge and rotate joint](userimages/customs/36000/35635-1.jpg) Man-at-Arms (MOTU Hybrid) |
![[Man-at-Arms] Hello fellow realmers here is another MOTU custom in 1:18 scale. Man-at-Arms was made using a Marvel universe Wolverine. Sulpted the Helmet, armor, boots. Thanks for looking and as always comments are welcome.](userimages/customs/31500/31478-1.jpg) Man-at-Arms | ![[Man-at-Arms] The Four Horseman sculpted these incredible figures almost 10 years ago and I had a blast repainting this particular character Man-At-Arms.](userimages/customs/30000/29977-1.jpg) Man-at-Arms |
![[Man-at-Arms] Continuing with my MOTU habit, it's Duncan AKA Man-At-Arms. A few shouts to make on this one, in no particular order, Pock63 for the lantern base, Bobtheodd for the armour and weapons and Zombieforhire for the Man-at-arms, cheers guys!!. I'd also like to thank all the people who have made this guy before me, Arez, vidmouse, madtinker and Crisco as I looked to the theirs for inspiration and ideas. Well after all that onto the recipe:
Base= DCUC five pack John Stewart green Lantern
Head = 200x man-at-arms - dremmeled to fit
Right arm = DCUC dr.midnight with 200x man-at-arms grafted on and sculpted to blend. Changed the shoulder disc for the GL one as the original was broken and wanted the green disc in there.
Left arm = Green Lantern up to elbow then Dr.M, 200x man-at-arms dremmeled out and sculpted to blend.
Lower right leg = Dr.Midnight for the brown joint, sculpted bindings and fur.
Lower left leg = DCUC Deathstroke for the orange joint, 200x man-at-arms armour and foot drem](userimages/customs/29500/29432-1.jpg) Man-at-Arms | ![[Evil Man-at-Arms] Continuing with my revision of unposted customs. Here it is Evil Man-At-Arms, a very cool idea of fanartist JafariStew. I have added the original pic with the bio in it. It was made with a 200X Zodac in the days that MOTUCs were just starting to come out.](userimages/customs/28000/27600-1.jpg) Evil Man-at-Arms |
![[Duncan - the Man-at-Arms] Basically this is an update of the first ever custom I ever did. As a kid I did not like the fact that my Man-At-Arms did not have his mustache. So back then I drew it on with a marker. About a quarter of a century later I found a loose Man-At-Arms head at a flea market and decided I'd have another go. I found a Tri-Klops body that I repainted in a somewhat darker green, sculpted a mustache with Apoxy Sculpt for the head, and painted the eyes and the helmet. Bought his armor on a website and repainted it with a brownish wash. I might give him a back like the MOTUC Man-At-Arms in time, but for now I'm quite pleased with him.](userimages/customs/17500/17237-1.jpg) Duncan - the Man-at-Arms Masters of the Universeby GARBasically this is an update of the first ever custom I ever did. As a kid I did not like the fact that my Man-At-Arms did not have his mustache. So ba...2 comments | ![[MOTU Man-at-Arms] Arez' man-at-arms dob 7/22/09
My latest motu custom. Ever since I got him more than a year ago, I wanted to use a base that will be in a way similar to the motu figure and the only one that came close to it was smc scorpion. I had a problem with it, because scorpion's upper body was a little to big for duncan's armor to fit, so I finally found and upper body for the armor to fit. I also took some liberties on my custom, I added some parts and painted others flat black, metallic red and blue to make him different/unique. Btw, I hurried up to get him done the same day I got my motuc man-at-arms. Hope you dig him, because I totally do!
Recipe:
-Smc scorpion's waist, arms and legs.
-Lcbh conan's boots.
-Motu duncan's head, hands and accessories.
-Tnn wrestler's upper body.
Thanks for looking!!!](userimages/customs/16500/16383-1.jpg) MOTU Man-at-Arms Masters of the Universeby AREZArez' man-at-arms dob 7/22/09
My latest motu custom. Ever since I got him more than a year ago, I wanted to use a base that will be in a way similar t...10 comments |
![[Man-at-Arms] Followed MadThinker76's recipe (thanks!) and tweaked it a bit b/c I already had used Super Patriot's arm for another custom, so I used Deathlok's arm. I decided not to modify it with Man-at-Arm's fist because I liked the idea he could grab stuff from his utility belt and so on...](userimages/customs/11500/11004-1.jpg) Man-at-Arms | ![[Man-At-Arms] Built from a Super Patriot body, LCBH Conan foot, and a 2002 MOTU Man-At-Arms head and armor.
I had an extra Man-At-Arms and wanted a more dynamic articulation for him. Plus wanted to make him more machine than man.
I was thinking "HUMAN TANK".
Thought he would ditch the mace/club and go for a canon so Super Patriot seemed the best candidate. There was a neck modification, some sanding, and a little sculpty involved.
By using the Man-At-Arms fore arm on the left arm, I can still attach the missle launcher weapon that came with him.
So he has a canon on his right arm and if I want, a missle launcher on the left.
I have also added on his left shoulder the Royal Eternian Army Seal with his serial number. Please forgive the blurriness of the photos, working with a new camera.](userimages/customs/8000/7774-1.jpg) Man-At-Arms |
![[Man-At-Arms] I used an original MOTU Man-At-Arms head, a combination of original and 2002 MOTU Man-At-Arms armour, the weapons is from the 2002 Man-At-Arms. The large Shoulder Armour is removable.](userimages/customs/5500/5158-1.jpg) Man-At-Arms Masters of the Universeby CriscoI used an original MOTU Man-At-Arms head, a combination of original and 2002 MOTU Man-At-Arms armour, the weapons is from the 2002 Man-At-Arms. The la...0 comments | |
|