![[Nightcrawler (a.O.a. Vers2)] Hey. So this is very similar to my last AOA Kurt but this time I used a Fantomex body I had been holding onto for a while. Sculpted the shoulder pads, dremmeled down then sandpapered the waist. Added the head and limbs from Toybiz X-Men Legends NC, tail from Toybiz classic NC, "BAMF" cloud is from Toybiz Storm, modded and repainted. Already being a fan-favorite and revamped for thr X-Termination series going on, I felt this needed to be reproduced, non-commissioned. Thanks for stopping by, hope you like and keep posting my fellow artists! Peace...](userimages/customs/49500/49171-1.jpg) Nightcrawler (a.O.a. Vers2) Marvel Legendsby Comicustoms!Hey. So this is very similar to my last AOA Kurt but this time I used a Fantomex body I had been holding onto for a while. Sculpted the shoulder pads,...5 comments | ![[Astonishing Nightcrawler] in my opinion, the toy companies just can;t get him right can they? they keep making him so damn ugly. i sculpted his sunken cheeks and gave kurt a smirk, added a little more hair in the front, i gave him a pair of namor legs and spliced nightcrawler's boots in added a flexible tail with wire and hot glue.](userimages/customs/47000/46734-1.jpg) Astonishing Nightcrawler Marvel Universeby Mutation92in my opinion, the toy companies just can;t get him right can they? they keep making him so damn ugly. i sculpted his sunken cheeks and gave kurt a sm...2 comments |
![[Nightcrawler and Colossus] just some slight modification. i picked up the juggernaut/colossus box set, and the colossus was...sad. he was grey! no i couldn't have that. i painted him silver and washed the yellow and red cause i felt it looked plain. kurt was too tall and so i cut out a portion of his torso and lower arms, then i painted a darker red.](userimages/customs/46500/46285-1.jpg) Nightcrawler and Colossus Marvel Universeby Mutation92just some slight modification. i picked up the juggernaut/colossus box set, and the colossus was...sad. he was grey! no i couldn't have that. i painte...0 comments | ![[Nightcrawler] Just made a quick updated nightcrawler using the XMC archangel and XMC ultimate nightcrawler for the head, hands and lower legs then repaint. All comments and advice is hugely welcomed since i'm 14, thanks, Aiden.](userimages/customs/46000/45671-1.jpg) Nightcrawler |
![[Nightcrawler (X-Force/Aoa)] Wanted a meaner ruddier Kurt after reading the recent X-Force arcs where his AoA counterpart joined up. Head is Dracula and the hands, tail and feet are from the XMC Nightcrawler. Sculpted the hair and shoulderpads and gave him a really deep wash.](userimages/customs/45500/45173-1.jpg) Nightcrawler (X-Force/Aoa) Marvel Legendsby WingsWanted a meaner ruddier Kurt after reading the recent X-Force arcs where his AoA counterpart joined up. Head is Dracula and the hands, tail and feet a...13 comments | ![[Astonishing Nightcrawler Heroic Age] hi guys! my next astonishing X-men Custom figure is Nightcrawler!
The base is all SW comic pack Nightcrawler, just take the red rubber off, then sculpting the line & new X emblem.
#sory for some bad camera shot..hope you like it guys.
(spesial thanx to RidhoBengkelToys)](userimages/customs/44000/43979-1.jpg) Astonishing Nightcrawler Heroic Age Marvel Universeby sibalunghi guys! my next astonishing X-men Custom figure is Nightcrawler!
The base is all SW comic pack Nightcrawler, just take the red rubber off, then sculp...6 comments |
![[Nightcrawler] So I've been interested in rounding up my x-men in their modern costumes lately and I wanted to update my nightcrawler. So here's his AXM costume.
I used a xmc archangel and transplanted nightcrawlers forearms, legs and tail onto the figure. I was going to use the head from the ml 9 nightcrawler but it was too big and gargoyle like, so I decided to use longshots. I sculpted the hair and added the ears, I also did the shoulder mod to make his shoulders less broad. He was painted with citadel paints. Hope you guys like him!
Constructive criticism is welcome!](userimages/customs/43500/43197-1.jpg) Nightcrawler Marvel Legendsby baby_customsSo I've been interested in rounding up my x-men in their modern costumes lately and I wanted to update my nightcrawler. So here's his AXM costume.
I ...6 comments | ![[Nightcrawler X-Men Movie Uniform V.3 -100th Post] Well, This is my 100th post on figure realm! to commemorate, I wanted my 100 to be my first, too. I present in a retrospective pic all 3 versions of this custom. This was posted for the first time on April 28 2011. It was just a kitbash, with very little black paint on the pants. That was all. I couldn´t even paint at that time, didn´t have a dremel, didn´t have any paints but black, didn´t have any material to sculpt,and above all, didn´t have a clue of what I was doing. But I´m glad I did it, cause it got me in the way. On version 2, I painted the pinstripes red (badly) and used a more stylized body. Version 3 has been totally repainted, including uniform,skin, tail, nails hair and even teeth.
I include a pic of this custom´s evolution, and my work´s and skills in little more than a year of practicing, studying tutorials and practicing again.
Now, let´s get back to work to post a 100 more!](userimages/customs/42000/41607-1.jpg) Nightcrawler X-Men Movie Uniform V.3 -100th Post X-Men - Moviesby ringomendozaWell, This is my 100th post on figure realm! to commemorate, I wanted my 100 to be my first, too. I present in a retrospective pic all 3 versions of t...12 comments |
![[Nightcrawler (Utopia)] Wanted to do Kurt in his last uniform and also stick to a more realistic paint wash. Hands, feet and head are from Ultimate Nightcrawler and sculpted the gloves, costume and the holes from all the removed flame. The tail is super poseable made from a twistie tie and hot glue. The rapier wad from some old Zorro figure.](userimages/customs/41000/40882-1.jpg) Nightcrawler (Utopia) Marvel Legendsby WingsWanted to do Kurt in his last uniform and also stick to a more realistic paint wash. Hands, feet and head are from Ultimate Nightcrawler and sculpted ...6 comments | ![[Nightcrawler X-Force] Well, i originally had this guy 90% done using a x men classics nightcrawler with only his neck peg to glue in, and i was ont he phone while doing it. unfortunately glue sept through a crevice in his neck and glued his arm ball joint shut!=( them i got really mad because of the time i took to do this guy, so i left my house n got a rojo tea monster. i came back and remember i had a marvel legends galactus series nightcrawler in my fodder with a broken head. so i bashed my messed up version with a hammer on his upper torso n modder the ML upper torso to fit on top of the xmc's lower torso and legs. after that i had to sand the torso down to fit the slightly bigger ml upper to fit right. after that i told myself the xmc lower arms looked better with the finger nails and gloves so i put them on a ml's arms. after that sanded, repainted and sealed. i made a custom blue for his skin tones and i think it turned out nice! let me know what u guys think
Head, lower half ( torso down) lowe](userimages/customs/41000/40617-1.jpg) Nightcrawler X-Force |
![[AOA/ X-Force Nightcrawler] Yo! Pretty straight forward custom, but I did a lot of Dremmeling to eliminate the prp. Dremmeled then sandpapered the shoulders and the thin seem running down the chest and abs.Thanks goodness his shoulders are already black lol. Primered, then handpainted with XML Nightcrawler head (much better sculpt). I thought the Storm cloud was a stroke of genius, if I do say so myself lol. Another one for my good friend Charles Pate! Thanks for stopping by, keep up the great work my fellow innovative artists!
C.C! (Iam finally getting a logo done... becuase I aint done!)](userimages/customs/40500/40369-1.jpg) AOA/ X-Force Nightcrawler Marvel Legendsby Comicustoms!Yo! Pretty straight forward custom, but I did a lot of Dremmeling to eliminate the prp. Dremmeled then sandpapered the shoulders and the thin seem run...12 comments | ![[Nightcrawler] i always loved the incognito, plain clothes, nightcrawler from the classic x-men books. i had nightcrawler head, hands, tail and feet left over from my wizard custom so i thought id give him a shot. hes a batman legacy joker body. i cut off the string tie and sculpted in a normal one. i drilled out the ankle peg holes to fit the dc leg joints, carved nightcrawler arms into pegs to fit in dc sleeves then sculpted toe and finger nails and a lil hand and foot detail. drilled a hole to fit the tail and shaved down the hair to fit the hat (i got it in a fodder trade, no idea what its from) and repainted totally.
as always, all comments are greatly appreciated.](userimages/customs/40500/40123-1.jpg) Nightcrawler |
![[Nightcrawler Uncanny X-Force] Big fan of the Uncanny X-Force book and glad they brought back Nightcrawler. Nightcrawler was made using an existing Marvel Legends Nightcrawler. The hair was sculpted and the swords were toothpick swords.](userimages/customs/40500/40023-1.jpg) Nightcrawler Uncanny X-Force Marvel Legendsby comedianvietBig fan of the Uncanny X-Force book and glad they brought back Nightcrawler. Nightcrawler was made using an existing Marvel Legends Nightcrawler. Th...5 comments | ![[Aoa Nightcrawler] I took the 2 pack Nightcrawler, added some sculpt to the chest and back, sculpted his leg details, bracers, and hair. Painted up and viola, gave him a sword from a POTC figure.](userimages/customs/40000/39992-1.jpg) Aoa Nightcrawler Marvel Universeby KiboBeerNomadI took the 2 pack Nightcrawler, added some sculpt to the chest and back, sculpted his leg details, bracers, and hair. Painted up and viola, gave him a...1 comments |
![[Uncanny X-Force Nightcrawler] Just a repaint to round out the X-Force Collection. Light up eyes still work!](userimages/customs/40000/39862-1.jpg) Uncanny X-Force Nightcrawler | ![[X-Force Nightcrawler] Just a simple repaint. A lot of people have been making 6 inch versions of this guy, but I haven't really seen any Marvel Universe scale. So, per request, I gave it a shot. I had made X-Force Fantomex about a year ago and this guy was to go along with that. I assume over time that I'll eventually end up making a whole team. lol White is my least favorite paint to use, so I was surprised it came out so well. He retains his poseability, I just don't like trying to fix Marvel Universe into complex poses. Those legs pop off too easily to me. The emblem on his chest took some delicate effort, but I managed to get the tattoo over his eye right on the first try.](userimages/customs/39000/38932-1.jpg) X-Force Nightcrawler X-Forceby DravenheartJust a simple repaint. A lot of people have been making 6 inch versions of this guy, but I haven't really seen any Marvel Universe scale. So, per requ...3 comments |
![[Nightcrawler (X-Force)] A friend asked me to make this guy for him, which i was happy to do since I'm trying to make every member of at least the Uncanny X-Force, if not the original Wolverine X-Force team. He's the same recipe everyone does, ML Nightcrawler with a shaved down chin, and the inner lines of the V on his costume sculpted over. Enjoy.](userimages/customs/37500/37473-1.jpg) Nightcrawler (X-Force) | ![[AOA X-Force NIGHTCRAWLER] This alternate version of Nightcrawler crossed over from the Age of Apocalypse timeline to join X-Force and hunt down fugitives from his own timeline, including Sugar Man and Dark Beast.
Modified XMC Ultimate Nightcrawler figure. Details/additions sculpted with Apoxie Clay. Painted with Citadel paints.](userimages/customs/37500/37459-1.jpg) AOA X-Force NIGHTCRAWLER Marvel Legendsby glennwebman69This alternate version of Nightcrawler crossed over from the Age of Apocalypse timeline to join X-Force and hunt down fugitives from his own timeline,...4 comments |
![[Nightcrawler] This is a simple paint job, I also use a some parts I was not using. please comment and tell me what you think.
Thank you](userimages/customs/37500/37051-1.jpg) Nightcrawler | ![[Nightcrawler] I replaced the head with Dracula's head, sanded the upper lip to remove the mustache, and then added a bit of green stuff to reshape the upper lip/mouth. I then repainted the head, and the body (the body just to clean up lines and make him nicer to look at).](userimages/customs/37000/36871-1.jpg) Nightcrawler Marvel Legendsby ControlspireI replaced the head with Dracula's head, sanded the upper lip to remove the mustache, and then added a bit of green stuff to reshape the upper lip/mou...10 comments |
![[X-Force Style Nightcrawler] Nightcrawler as seen in the X-force comics. Just a simple repaint with a cast of the x- insignia and a stand](userimages/customs/37000/36659-1.jpg) X-Force Style Nightcrawler | ![[Nightcrawler] Here's my take on the current costume of Nightcrawler. He's made from an X-men classics Nightcrawler with the body sculpted over using Aves apoxie sculpt. His lower arms came from a marvel legends Nightcrawler and so did the tail, grafted on to the other body. Now he's pretty much the perfect version, his eyes and mouth still lighting up when you press the button on his back!](userimages/customs/36500/36216-1.jpg) Nightcrawler Marvel Legendsby Jin SaotomeHere's my take on the current costume of Nightcrawler. He's made from an X-men classics Nightcrawler with the body sculpted over using Aves apoxie scu...6 comments |
![[X-Force Nightcrawler] and the team continues.....
this time up is nightcrawler, totally repainted in his x-force duds. i painted him last night after reading yesterdays uncanny x-force issue. i decided to do the chest x red like in the book rather than the white one from the promo art.
psylocke and wolverine are both mid production and should be up in the coming days.](userimages/customs/36500/36072-1.jpg) X-Force Nightcrawler | ![[Nightcrawler Mighty Mugg] Custom Nightcrawler Mighty Mugg – Created Sep 30, 2011
I was commissioned by someone to make this Nightcrawler Mighty Mugg, and it was to be a gift for this person’s friend who is obsessed with anything and everything Nightcrawler.
I had never done a custom Mighty Mugg before, but given my background in cartooning I thought it would be fun. After all, it’s just like drawing a cartoon only instead of doing it on paper it’s a 3-D object.
The base Mighty Mugg was a Skrull, chosen because of his ears. So I sanded it down, penciled out the design, and painted over it. I tried my best to stick to the basic Mighty Mugg art design, but I couldn’t help adding my own flairs into it. I think this one is actually more detailed than the standard Mighty Mugg and while I had my concerns about that, I was told the person it was gifted to loved it so I consider that a job well done.](userimages/customs/36500/36004-1.jpg) Nightcrawler Mighty Mugg Mighty Muggsby CrimsonVampyreCustom Nightcrawler Mighty Mugg – Created Sep 30, 2011
I was commissioned by someone to make this Nightcrawler Mighty Mugg, and it was to be a ...5 comments |
![[Age of Apocalypse Set Magneto Nightcrawler Sunfire] I started our with Magneto and nightcrawler then I added a base and decided that I needed more figures to go with it. I think that i did an exceptional job on Nightcrawler! Yes that Is Apocalypse head floating in the middle of the set!](userimages/customs/36000/35739-1.jpg) Age of Apocalypse Set Magneto Nightcrawler Sunfire | ![[Nightcrawler] I made this Nightcrawler back around the time the Whedon/Cassaday run of Astonishing X-men was ending. A little plain, but this was still one of my favorite looks for Kurt since it was nice n sleek and still reminiscent of his classic look.
He was made using an Ultimate Nightcrawler head, ML7 Vision body, and hands/feet/tail transplanted from an ML9 Nightcrawler. Included a nice group shot with a lot of the other X-men figures and customs I had.](userimages/customs/36000/35680-1.jpg) Nightcrawler Marvel Legendsby raybotI made this Nightcrawler back around the time the Whedon/Cassaday run of Astonishing X-men was ending. A little plain, but this was still one of my fa...10 comments |
![[Nightcrawler (X-Force)] CC30 Entry:
Nightcrawler is another entry. Mostly a repaint of an ML Nightcrawler with some sculpting to touch up some of the details and an Ultimate Nightcrawler head.](userimages/customs/36000/35657-1.jpg) Nightcrawler (X-Force) Marvel Legendsby Jakey-JakeCC30 Entry:
Nightcrawler is another entry. Mostly a repaint of an ML Nightcrawler with some sculpting to touch up some of the details and an Ultimate...5 comments | ![[Nightcrawler as "Cool Santa"] Just a quick custom for the contest. Good luck to everyone in the contest; I'm sure the other customs will be awesome!!!
Happy Holidays!!!!
Recipe:
Base- ML Iceman
Arms,legs,&tail- ML Nightcrawler
Jacket- an old Gambit figure
Everything else is sculpted
I sewn a bag for the presents real quickly. As you can tell, my sewing skills are sub par. HaHa
I also painted candy canes in the shape of an "X" on his chest.](userimages/customs/36000/35509-1.jpg) Nightcrawler as "Cool Santa" X-Menby Bamf67Just a quick custom for the contest. Good luck to everyone in the contest; I'm sure the other customs will be awesome!!!
Happy Holidays!!!!
Recipe:...8 comments |
![[Marvel Handful of Heroes:Warmachine.1st Appearence] Just basic repaints of the marvel handful of heroes](userimages/customs/35500/35302-1.jpg) Marvel Handful of Heroes:Warmachine.1st Appearence | ![[AOA Nightcrawler] nightcrawler body,dracula head,movie iron man lower legs and some old swords.Random pieces of plastic for armored parts.](userimages/customs/35500/35288-1.jpg) AOA Nightcrawler |
|