![[Spidey Showdowns: Sandman] Had this WWE Ring Giants Batista figure laying around for the longest time. The arms had been cut away and used previously on another custom, so it was perdy much just sittin' there doin' nuthin'. Thought it would be useless, having no arms and all, but then inspiration struck. Decided to build one enormous looking Sandman, big enough to finally squash that spider!
With a base pad as the sandpit, the legs were no longer necessary so cut them off just above the knees and used them for the arms. Copious amounts of apoxie went in to secure the arms, and create sand detailing. Made the fist-mace by using one-of-those spherical prize capsules, sculpted the spikes overtop and attached it to the arm. For the other hand, used clamshell plastic to create the shape of his fingers resembling pouring sand, then sculpted over. The head was also reworked to look a bit more like Marko - squared off hair, stronger jaw, sand texture.
Now depending on the type of Spidey figure that's posed with him, thi](userimages/customs/50000/49652-1.jpg) Spidey Showdowns: Sandman Spider-Man - Movieby N TTHad this WWE Ring Giants Batista figure laying around for the longest time. The arms had been cut away and used previously on another custom, so it wa...3 comments | ![[Spartacus Blood and Sand Custom] Hi check spartacus, nice accesories 100% homemade...
Blood and Sand!!](userimages/customs/49500/49344-1.jpg) Spartacus Blood and Sand Custom |
![[Wonder Girl - Cassie Sandsmark] I've wanted to do a Cassie Sandsmark for a while, but she's one of those who's look changes a little in seemingly every appearance. So, I made her as a type of Amalgamation of her looks. I really like the final design, honestly. She came out well, and probably even did have this look at some point. I always thought she was a good Wonder Girl, and liked the fact that she was the half god daughter of Zeus. So, with me choosing to delve more into DC as of late, I knew I had to put her on the list to make. Overall, a very simple design. Even the emblem on her shirt was simple enough to pull off. I tried sculpting on a hairband for her, which I do find to be the only weak point of the character. I didn't have a whip on hand, or else I would have painted it golden and attached it to her side for the lasso. So, sadly, that part is missing. And I know it's hard to tell from the angles I put up, but her bracelets do have the stars on them. You can check out more poses of her on my Facebook if y](userimages/customs/49500/49161-1.jpg) Wonder Girl - Cassie Sandsmark DC Infinite Heroesby DravenheartI've wanted to do a Cassie Sandsmark for a while, but she's one of those who's look changes a little in seemingly every appearance. So, I made her as ...1 comments | ![[Cassandra Nova] Redoing a few New X-Men figures and decided to have a crack at Cassie too. Swapped the head for the fugly Viper one and added the right hand of Hope along with Draculas tail coats. Sculpted the jacket, trousers and top of her head.](userimages/customs/48000/47870-1.jpg) Cassandra Nova Marvel Legendsby WingsRedoing a few New X-Men figures and decided to have a crack at Cassie too. Swapped the head for the fugly Viper one and added the right hand of Hope a...4 comments |
![[Sandman V2] just took some more hot glue and made his forearms and bicep bigger. i wanted it to look more natural.](userimages/customs/47000/46859-1.jpg) Sandman V2 | ![[Wonder Girl - Cassie Sandsmark] Now its time to show Cassie another member of the WW family. Hope you like it](userimages/customs/46500/46265-1.jpg) Wonder Girl - Cassie Sandsmark |
![[Sandman] I bought the Spider Man 3 Sandman figure, but it was too small, and frankly, looked lame. I took an Absorbing Man and scupted some sleeves and painted it up. I took a Punisher head and sculpted the hair, and then attached the SM3 Sandman hands to him.](userimages/customs/46000/45793-1.jpg) Sandman Marvel Universeby shayne907I bought the Spider Man 3 Sandman figure, but it was too small, and frankly, looked lame. I took an Absorbing Man and scupted some sleeves and painte...1 comments | ![[SANDMAN Golden Age Wesley Dodds JSA] Love the JSA characters, specialy the ones from the 40's! This one is based on his appereance in Sandman Mystery comics (really good run). Used a Spirit body & the mask & gun from the horrible DC Diect Sandman.](userimages/customs/45500/45453-1.jpg) SANDMAN Golden Age Wesley Dodds JSA DC Directby optimusleoLove the JSA characters, specialy the ones from the 40's! This one is based on his appereance in Sandman Mystery comics (really good run). Used a Spir...1 comments |
![[Sandman Icon] This is my custom 12.5 inch tall Marvel Icons Sandman. He was made using a Bobby Lashley figure. All the details were sculpted using apoxie sculpt. I sculpted the arms, base, clothing details, and the hair. The sandman hands are from the original, but the mallet and ball spike were sculpted. They were made using foam with apoxie sculpt so they wouldn't be too heavy. The base was made the same way using a wood base, foam cone, and apoxie sculpt for the sand texture. As always comments, are welcomed. Hope you all like him, and God bless! Merry Christmas and a Happy New Year!
Your customizing pal, Mando](userimages/customs/45500/45361-1.jpg) Sandman Icon Marvel Iconby GOLIATH_CUSTOMSThis is my custom 12.5 inch tall Marvel Icons Sandman. He was made using a Bobby Lashley figure. All the details were sculpted using apoxie sculpt. I ...13 comments | ![[Sandman] Head - DBZ Movie Goku
Body - SW Palpatine](userimages/customs/45000/44993-1.jpg) Sandman |
![[Sandman] Another drawing model figure just the usual Sharpie deal I sculpted his hair and made the spike out of tin foil and tooth picks](userimages/customs/45000/44888-1.jpg) Sandman Spider-Manby BluehawKAnother drawing model figure just the usual Sharpie deal I sculpted his hair and made the spike out of tin foil and tooth picks...5 comments | ![[Sandman] just a repaint on gladiator with a punisher head. used an ultimate thor hammer, and cut plastic for his hands. hot glue and paint, retained the wrist articulation.](userimages/customs/44500/44213-1.jpg) Sandman Marvel Universeby Mutation92just a repaint on gladiator with a punisher head. used an ultimate thor hammer, and cut plastic for his hands. hot glue and paint, retained the wrist ...2 comments |
![[Black Bat Cassandra Cain] The second commission for my pal James. Cassandra Cain, aka, Black Bat. Another character I hope to see more of in Grant Morisson’s Batman Inc.
Cassandra was a Hope Summers with what I think was a Gen13 head, sculpted mask, arm wraps, fodder for belts, and a custom paint job.
See you in the future!
AC](userimages/customs/44000/43863-1.jpg) Black Bat Cassandra Cain | ![["The Intellectual Savior of the Masses" ] This custom figure is of current WWE superstar Damien Sandow. I tried to keep it looking as factory made as possible. I used a Mattel Triple H head with modified hair and sculpted beard on a Cody Rhodes body. I then completed it with a paint job to match his current attire. Message me with any questions or comments.
Thanks and enjoy!](userimages/customs/43500/43387-1.jpg) "The Intellectual Savior of the Masses" Wrestlingby CaptainCustomsThis custom figure is of current WWE superstar Damien Sandow. I tried to keep it looking as factory made as possible. I used a Mattel Triple H head wi...1 comments |
![[Tatooine Display with Sandtroopers] Hi All
On father's day just gone I was a very lucky dad a got not one but two SS Sandtrooper's. So I thought about doing a dio with them but decided that I would do a display for them instead so that I could arrange them around whenever I wanted.
Recipe
Sandtroopers - Are from Sideshow and are the ones that come with all the extra weapons and the rubbery sand base. Nothing to major was done with them just a good repaint and weathering using Vallejo, GW paints and chalk pastels.
The base - The base is made from marine foam and cut out to the design you see in the pics. The walls have been covered in plaster of paris and PVA/woodglue and the base was covered in fine washed river sand.
The door was made using thin cardboard from a ceral box, and the frame section in front of the door was done using Evergreen plasticard .
The intercom was made using parts from 1/1000th Star Trek nacelle some 7" Artasylum communicators and a tricorder and a old paint lid.
The shade cloth is just](userimages/customs/43500/43269-1.jpg) Tatooine Display with Sandtroopers Star Warsby HembleHi All
On father's day just gone I was a very lucky dad a got not one but two SS Sandtrooper's. So I thought about doing a dio with them but decided ...7 comments | ![[Sandman] Simple recipe but very efficient: Absorbing Man with modified head with epoxy + Right hand of Pallantides (McFarlane Conan) and left hand of Ronin (HML 2-Pack), covered with sand. Painting with matte vinylis paints.](userimages/customs/43500/43054-1.jpg) Sandman Marvel Universeby Leo CustomsSimple recipe but very efficient: Absorbing Man with modified head with epoxy + Right hand of Pallantides (McFarlane Conan) and left hand of Ronin (HM...9 comments |
![[Sandman] Here's another one. I decided I wanted to make a few of Spidey's villains in the Marvel U style, so I started with Sandman. Pretty basic recipe, just an Absorbing Man body with a Punisher head. I sanded down the thighs a little and sculpted some sand texture on the arm. Then I made him a loot bag.
Thanks for looking and all comments are welcome.](userimages/customs/43000/42708-1.jpg) Sandman Marvel Universeby frankbooth23Here's another one. I decided I wanted to make a few of Spidey's villains in the Marvel U style, so I started with Sandman. Pretty basic recipe, jus...6 comments | ![[Sand Man] I put some really light brown paint on him and some actual pieces of sand on him.
(pics taken with a mac book pro)](userimages/customs/42500/42201-1.jpg) Sand Man |
![[Batgirl (Cassandra Cain)] I needed a Cass Cain as Batgirl figure, simple as that. I own one DC Direct version, but it was a repainted Ed McGuinness style Elseworlds Batwoman and as such had huge thighs and cartoony proportions. When I found a Scarlet Witch figure in the bargain-ish bin (not cheap enough to be considered a true bargain but oh well) I decided I'd have stab at turning her into the Cassandra Cain version of Batgirl. For the head, I used a 5 inch The Dark Knight Batman head. It seemed like a silly idea to try and make that head feminine, but I figured I could make it work since all facial features are covered by her mask. I dremelled down the jaw and chin areas and smoothed away some of the cowl definition. Then I cut off the ears and made new ones cut from plastic blister packaging, fusing them to the cowl with sculpt. Sculpted over the eyes and mouth areas and added the "stitches", cut from card. The Bat-signal was printed out and painted over, the belt from a DCUC Kamandi (that is a ver](userimages/customs/42500/42124-1.jpg) Batgirl (Cassandra Cain) Batmanby JeddTheJediI needed a Cass Cain as Batgirl figure, simple as that. I own one DC Direct version, but it was a repainted Ed McGuinness style Elseworlds Batwoman an...4 comments | ![[B3gw528 LOA/SOS Cassandra Cain Batgirl] well i need a cassandra cain
just a repaint and sculpt of face
want my b3gew backstory see my other B3gw528 LOA/SOS submissions
sadly figure realm wont allow me to put in my backstory..........
but basically
ra's wanted chosen one
david cain and shrike were comissioned specifically to find teh chosen one/one who is all
eventually david cain went to talia to create perfect dna child
talia said no and she liked david's idea so made in her mind perfect dna child wiht bruce wayne.
david went to lady shiva
they had a child who they named cassandra cain
both damian and cassandra were competing for the title of one who is all
originally bane's title then bruce wayne's
after damian (age9) went to gotham and met his father
bane broke batmans back out of anger (bane loved talia and bruce also stole bane's title of one who is all) then once he healed ra's saw it fair that cassandra shoudl have same opportunities as damian so whilst damian got to know his father , cassandra got to train with &](userimages/customs/42500/42015-1.jpg) B3gw528 LOA/SOS Cassandra Cain Batgirl Batmanby Chester001well i need a cassandra cain
just a repaint and sculpt of face
want my b3gew backstory see my other B3gw528 LOA/SOS submissions
sadly figure realm w...1 comments |
![[Sandman] Had a spare Starman and although the DCD JSA Sandman figure is great is lacks articulation. I wanted one with more poseability so I did a switchover.
DCD-JSA Sandman head/hands/cape/belt rods/collar
DCUC Starman everything else.
Swapped heads, the lower arms are DCUC J Hex, every thing below the waist is untouched.
Added a little silver zipper in front.
Colour scheme is not exact as in the books but the more I kept it all black themore I prefered it that way.
Gun was tweaked from my fodder bin.
I hope you like.](userimages/customs/41500/41303-1.jpg) Sandman DC Universeby 3mountainsHad a spare Starman and although the DCD JSA Sandman figure is great is lacks articulation. I wanted one with more poseability so I did a switchover....3 comments | ![[Sandman] the body is just a repaint and the head was sculpted hair.
It was hard to make the accessories with patching paste.
I hope you liked.](userimages/customs/40500/40352-1.jpg) Sandman |
![[Sandstorm] This is Sandstorm, a 90s Spiderman villain. I saw his trading card, and as I made not long ago Sandman, I thought of using the same technique of a sand cone, but this time fixed to the figure.
Ruthless Aggression figure
Storm hair
Deluxe Aggression head
Blister clear plastic, with glue and real sand](userimages/customs/40000/39655-1.jpg) Sandstorm Marvel Legendsby argenta-2008This is Sandstorm, a 90s Spiderman villain. I saw his trading card, and as I made not long ago Sandman, I thought of using the same technique of a san...6 comments | ![[Spartacus: Blood and Sand] For the second figure of the day we have... Spartacus! Made this for a fellow-realmer who like myself, is a big fan of Andy (man I miss that dude on TV) :(.
Sparatcus as made from the following parts:
TNA Body
DCUC hands
Wolvie arms
Modified Longshot head
The bandages are sculpted-on. He also sports real leather gear and a real wooden shield that fasten via leather straps. We also gave him his trademark short sword to complete the "look". Hope you like him guys. God bless.](userimages/customs/40000/39653-1.jpg) Spartacus: Blood and Sand Movie Mastersby loosecollectorFor the second figure of the day we have... Spartacus! Made this for a fellow-realmer who like myself, is a big fan of Andy (man I miss that dude on T...39 comments |
![[Sandman] Enter the Sandman...
Sand Constructs - Sculpt and magnets, citadel sand, his hands are removable with the magnets and you can switch out for sand constructs at will.
Paint Job - Spray painted black and completely repainted him. I've always thought the striped shirt made him look like he's from the 40's...so I gave him a solid color green shirt so he can be more in the now...
Sandman](userimages/customs/40000/39584-1.jpg) Sandman Marvel Legendsby toxinvenomEnter the Sandman...
Sand Constructs - Sculpt and magnets, citadel sand, his hands are removable with the magnets and you can switch out for sand con...13 comments | ![[Sandman] Both lower arms came from first galactus series hulk i give him a full repaint because the actual figure looks plastic & also give him a new pair of big arms(sculpted)! !](userimages/customs/40000/39560-1.jpg) Sandman |
![[Sandman] Here it is my version of Classic Sandman, as the Spiderman Classics figure isn't good enough.
I have used a Wrestling deluxe figure (Batista), used 4 accesories of a movie Sandman figure, enlarged them, and made a extra hand out of scratch. The sand base is a cone of blister plastic with glued sand from across the park. Hope you enjoy it.](userimages/customs/39500/39312-1.jpg) Sandman Marvel Legendsby argenta-2008Here it is my version of Classic Sandman, as the Spiderman Classics figure isn't good enough.
I have used a Wrestling deluxe figure (Batista), used ...11 comments | ![[Sandman] lcbh clown face base, lcbh marv head, ungloved goon hands, ground off clownface detail and re-sculpted, smoothed out marvs face, trimmed bridge of nose and re-sculpted hair, texture sculpted on hands and forearms then painted in textured citadel paints. mace hand made from thunderball's weapon on end of fodder stick, hammer made from thor's hammer on top of fodder stick, all re-sculpted and textured.](userimages/customs/39000/38693-1.jpg) Sandman |
![[Sandman II] This Sandman is the Sandy Hawkins version. He was the original JSA Sandman's sidekick Sandy.
Before the Alex Ross update with the trench coat and fedora hat he wore this costume in the JSA.
Base figure is a repaint of the Black Lantern Hal Jordan
Goggles came from dc universe Starman's head
Gas Mask is from a GIJoe figure
Straps from Movie Masters B. Wayne
Belt from an Xmen figure,buffed out the X symbol
Leg and arm bands are from a ML Mr. Sinister cape
Gun is a ML Dr.Doom gun modified.
Hope you like.
Happy Good Friday and Happy Easter everyone.](userimages/customs/38500/38154-1.jpg) Sandman II DC Universeby 3mountainsThis Sandman is the Sandy Hawkins version. He was the original JSA Sandman's sidekick Sandy.
Before the Alex Ross update with the trench coat and fed...2 comments | ![[Sandman] Sanded the head and added 2 part epoxy for hair. Glued sand to the arm to create texture. Total repaint. I also hollowed out an MU hulk hand to create the over-sized attachable sand-hand.](userimages/customs/38000/37905-1.jpg) Sandman |
|