![[Sandman] I added some tan color paint to Sandman. I wanted him with more sand effect on his body.](userimages/customs/51000/50828-1.jpg) Sandman | ![[Sandman] Hi. This is my first contribution here and also my first completed custom. Sandman is a key Spidey villain who has never received a decent 3.75 scale treatment (and no comic version love), despite being featured in a feature film! The base body is Drax the Destroyer from the GOTG 3-pack. The head is a Punisher (original mold) with sculpted hair and some carving of the facial features. The sand weapons use the hammer and ball from the 2.5 inch version of the Spiderman 3 Sandman as a base with additional sculpting for the spikes. The sand stand is sculpted from scratch, and is a clamshell design that the figure can be removed from (the goal is a "rising from the sand" effect). The sand effect was achieved by painting the pieces with a sand color, then sprinkling actual sand (fine grit diorama sand from a hobby shop for clean uniform-ish particles) onto the wet paint, letting it dry into place, painting a top coat of sand color, and then sealing it with dullcoat. The wea](userimages/customs/50500/50425-1.jpg) Sandman Marvel Universeby PsychoPirateHi. This is my first contribution here and also my first completed custom. Sandman is a key Spidey villain who has never received a decent 3.75 scal...10 comments |
![[Spidey Showdowns: Sandman] Had this WWE Ring Giants Batista figure laying around for the longest time. The arms had been cut away and used previously on another custom, so it was perdy much just sittin' there doin' nuthin'. Thought it would be useless, having no arms and all, but then inspiration struck. Decided to build one enormous looking Sandman, big enough to finally squash that spider!
With a base pad as the sandpit, the legs were no longer necessary so cut them off just above the knees and used them for the arms. Copious amounts of apoxie went in to secure the arms, and create sand detailing. Made the fist-mace by using one-of-those spherical prize capsules, sculpted the spikes overtop and attached it to the arm. For the other hand, used clamshell plastic to create the shape of his fingers resembling pouring sand, then sculpted over. The head was also reworked to look a bit more like Marko - squared off hair, stronger jaw, sand texture.
Now depending on the type of Spidey figure that's posed with him, thi](userimages/customs/50000/49652-1.jpg) Spidey Showdowns: Sandman Spider-Man - Movieby N TTHad this WWE Ring Giants Batista figure laying around for the longest time. The arms had been cut away and used previously on another custom, so it wa...3 comments | ![[Sandman V2] just took some more hot glue and made his forearms and bicep bigger. i wanted it to look more natural.](userimages/customs/47000/46859-1.jpg) Sandman V2 |
![[Sandman] I bought the Spider Man 3 Sandman figure, but it was too small, and frankly, looked lame. I took an Absorbing Man and scupted some sleeves and painted it up. I took a Punisher head and sculpted the hair, and then attached the SM3 Sandman hands to him.](userimages/customs/46000/45793-1.jpg) Sandman Marvel Universeby shayne907I bought the Spider Man 3 Sandman figure, but it was too small, and frankly, looked lame. I took an Absorbing Man and scupted some sleeves and painte...1 comments | ![[SANDMAN Golden Age Wesley Dodds JSA] Love the JSA characters, specialy the ones from the 40's! This one is based on his appereance in Sandman Mystery comics (really good run). Used a Spirit body & the mask & gun from the horrible DC Diect Sandman.](userimages/customs/45500/45453-1.jpg) SANDMAN Golden Age Wesley Dodds JSA DC Directby optimusleoLove the JSA characters, specialy the ones from the 40's! This one is based on his appereance in Sandman Mystery comics (really good run). Used a Spir...1 comments |
![[Sandman Icon] This is my custom 12.5 inch tall Marvel Icons Sandman. He was made using a Bobby Lashley figure. All the details were sculpted using apoxie sculpt. I sculpted the arms, base, clothing details, and the hair. The sandman hands are from the original, but the mallet and ball spike were sculpted. They were made using foam with apoxie sculpt so they wouldn't be too heavy. The base was made the same way using a wood base, foam cone, and apoxie sculpt for the sand texture. As always comments, are welcomed. Hope you all like him, and God bless! Merry Christmas and a Happy New Year!
Your customizing pal, Mando](userimages/customs/45500/45361-1.jpg) Sandman Icon Marvel Iconby GOLIATH_CUSTOMSThis is my custom 12.5 inch tall Marvel Icons Sandman. He was made using a Bobby Lashley figure. All the details were sculpted using apoxie sculpt. I ...13 comments | ![[Sandman] Head - DBZ Movie Goku
Body - SW Palpatine](userimages/customs/45000/44993-1.jpg) Sandman |
![[Sandman] Another drawing model figure just the usual Sharpie deal I sculpted his hair and made the spike out of tin foil and tooth picks](userimages/customs/45000/44888-1.jpg) Sandman Spider-Manby BluehawKAnother drawing model figure just the usual Sharpie deal I sculpted his hair and made the spike out of tin foil and tooth picks...5 comments | ![[Sandman] just a repaint on gladiator with a punisher head. used an ultimate thor hammer, and cut plastic for his hands. hot glue and paint, retained the wrist articulation.](userimages/customs/44500/44213-1.jpg) Sandman Marvel Universeby Mutation92just a repaint on gladiator with a punisher head. used an ultimate thor hammer, and cut plastic for his hands. hot glue and paint, retained the wrist ...2 comments |
![[Sandman] Simple recipe but very efficient: Absorbing Man with modified head with epoxy + Right hand of Pallantides (McFarlane Conan) and left hand of Ronin (HML 2-Pack), covered with sand. Painting with matte vinylis paints.](userimages/customs/43500/43054-1.jpg) Sandman Marvel Universeby Leo CustomsSimple recipe but very efficient: Absorbing Man with modified head with epoxy + Right hand of Pallantides (McFarlane Conan) and left hand of Ronin (HM...9 comments | ![[Sandman] Here's another one. I decided I wanted to make a few of Spidey's villains in the Marvel U style, so I started with Sandman. Pretty basic recipe, just an Absorbing Man body with a Punisher head. I sanded down the thighs a little and sculpted some sand texture on the arm. Then I made him a loot bag.
Thanks for looking and all comments are welcome.](userimages/customs/43000/42708-1.jpg) Sandman Marvel Universeby frankbooth23Here's another one. I decided I wanted to make a few of Spidey's villains in the Marvel U style, so I started with Sandman. Pretty basic recipe, jus...6 comments |
![[Sandman] Had a spare Starman and although the DCD JSA Sandman figure is great is lacks articulation. I wanted one with more poseability so I did a switchover.
DCD-JSA Sandman head/hands/cape/belt rods/collar
DCUC Starman everything else.
Swapped heads, the lower arms are DCUC J Hex, every thing below the waist is untouched.
Added a little silver zipper in front.
Colour scheme is not exact as in the books but the more I kept it all black themore I prefered it that way.
Gun was tweaked from my fodder bin.
I hope you like.](userimages/customs/41500/41303-1.jpg) Sandman DC Universeby 3mountainsHad a spare Starman and although the DCD JSA Sandman figure is great is lacks articulation. I wanted one with more poseability so I did a switchover....3 comments | ![[Sandman] the body is just a repaint and the head was sculpted hair.
It was hard to make the accessories with patching paste.
I hope you liked.](userimages/customs/40500/40352-1.jpg) Sandman |
![[Sandman] Enter the Sandman...
Sand Constructs - Sculpt and magnets, citadel sand, his hands are removable with the magnets and you can switch out for sand constructs at will.
Paint Job - Spray painted black and completely repainted him. I've always thought the striped shirt made him look like he's from the 40's...so I gave him a solid color green shirt so he can be more in the now...
Sandman](userimages/customs/40000/39584-1.jpg) Sandman Marvel Legendsby toxinvenomEnter the Sandman...
Sand Constructs - Sculpt and magnets, citadel sand, his hands are removable with the magnets and you can switch out for sand con...13 comments | ![[Sandman] Both lower arms came from first galactus series hulk i give him a full repaint because the actual figure looks plastic & also give him a new pair of big arms(sculpted)! !](userimages/customs/40000/39560-1.jpg) Sandman |
![[Sandman] Here it is my version of Classic Sandman, as the Spiderman Classics figure isn't good enough.
I have used a Wrestling deluxe figure (Batista), used 4 accesories of a movie Sandman figure, enlarged them, and made a extra hand out of scratch. The sand base is a cone of blister plastic with glued sand from across the park. Hope you enjoy it.](userimages/customs/39500/39312-1.jpg) Sandman Marvel Legendsby argenta-2008Here it is my version of Classic Sandman, as the Spiderman Classics figure isn't good enough.
I have used a Wrestling deluxe figure (Batista), used ...11 comments | ![[Sandman] lcbh clown face base, lcbh marv head, ungloved goon hands, ground off clownface detail and re-sculpted, smoothed out marvs face, trimmed bridge of nose and re-sculpted hair, texture sculpted on hands and forearms then painted in textured citadel paints. mace hand made from thunderball's weapon on end of fodder stick, hammer made from thor's hammer on top of fodder stick, all re-sculpted and textured.](userimages/customs/39000/38693-1.jpg) Sandman |
![[Sandman II] This Sandman is the Sandy Hawkins version. He was the original JSA Sandman's sidekick Sandy.
Before the Alex Ross update with the trench coat and fedora hat he wore this costume in the JSA.
Base figure is a repaint of the Black Lantern Hal Jordan
Goggles came from dc universe Starman's head
Gas Mask is from a GIJoe figure
Straps from Movie Masters B. Wayne
Belt from an Xmen figure,buffed out the X symbol
Leg and arm bands are from a ML Mr. Sinister cape
Gun is a ML Dr.Doom gun modified.
Hope you like.
Happy Good Friday and Happy Easter everyone.](userimages/customs/38500/38154-1.jpg) Sandman II DC Universeby 3mountainsThis Sandman is the Sandy Hawkins version. He was the original JSA Sandman's sidekick Sandy.
Before the Alex Ross update with the trench coat and fed...2 comments | ![[Sandman] Sanded the head and added 2 part epoxy for hair. Glued sand to the arm to create texture. Total repaint. I also hollowed out an MU hulk hand to create the over-sized attachable sand-hand.](userimages/customs/38000/37905-1.jpg) Sandman |
![[Sandman] I took a break from customizing action figure sometime ago. This Sandman was done more than a year ago, I only had time to take a photo last night.
I'm starting to do a little bit of customizing, hopefully I can be back on track soon.
I hope no one missed me lol...](userimages/customs/37000/36975-1.jpg) Sandman Marvel Legendsby LokoboyI took a break from customizing action figure sometime ago. This Sandman was done more than a year ago, I only had time to take a photo last night.
I...15 comments | ![[Sandman W/ Real Sand] Hey guys, meet Sandman.
He is a heavily sculpted Absorbing man with a custom cast head.
Half of his body is encased in real, sealed sand.
Thanks for checking him out.](userimages/customs/34000/33963-1.jpg) Sandman W/ Real Sand Marvel Universeby bzcustomsHey guys, meet Sandman.
He is a heavily sculpted Absorbing man with a custom cast head.
Half of his body is encased in real, sealed sand.
Thanks...9 comments |
![[Marvel Legends Spider-Man Sandman Series Movie VEN] I had received this guy in a bulk lot of figures. His paint was worn, the silver on the eyes was almost non visible. I actually like the original sculpt of the Spider-Man movie Venom, however, I really dislike the gray scale faded colors they went with. One of the many side effects to the way they crammed him into the third movie. In my opinion, Venom is a popular enough character to carry a trilogy of movies on his own without the presence of Spider-Man, but let's leave that debate for another website. What bothered me the most was the awful pale pinkish-rouge that they colored his mouth and tongue with. Well, pulling from suggestions from movie critics, and my own senses, I repainted him with Model Master Paint. I used enamel (because I bought enamel by mistake instead of acryl) Guard red on his mouth and tongue. I used Model Master Acryl Gloss White on his teeth, eyes, and Venom chest symbol. I then applied Model Master Gloss Lacquer Overcoat to him, and I am really happy with how i](userimages/customs/32500/32376-1.jpg) Marvel Legends Spider-Man Sandman Series Movie VEN Marvel Legendsby 1kobocopI had received this guy in a bulk lot of figures. His paint was worn, the silver on the eyes was almost non visible. I actually like the original scul...3 comments | ![[SANDMAN (DC Vertigo)] I always wanted to have a Sandman in my collection, on a scale of 6 or 7 inches. However, the version of DC Direct has never pleased me. So, ever thought of creating a custom, but one could not imagine a good base to stay. With that, time passed, I was perfecting my techniques, until not long ago, I saw this recipe with a custom in FigureRealm. Hence the basis for being able to find and make my own Sandman was a leap.
I tried to include some of the elements present in the stories as the basis, which represents the Fiddlers Green, Matthew the Raven, accessories (mask, Ruby and Sandbag), and give the figure two pairs of hands in different positions.
I used Remy Sota SF, changing little with epoxy and painted with vinyl matt paints. The eyes, specifically, painted with glossy paint. The hair was modeled on the Powergirl DCU. The cloak is woven with glue droplets on different strategic locations, to trim to the ideal. The Fiddlers Green is the basis of Ripclaw McFarlane. The crow and Sandb](userimages/customs/31500/31469-1.jpg) SANDMAN (DC Vertigo) D.C. Universeby Leo CustomsI always wanted to have a Sandman in my collection, on a scale of 6 or 7 inches. However, the version of DC Direct has never pleased me. So, ever thou...12 comments |
![[Sandman] Presenting the 4th figure for my Series 5 Marvel Universe Avengers Riverspoons Custom Series!
SANDMAN
I used Luke Cage figure for this custom, the upper body and arms were sculpted with a sand like texture. As for the head sculpt, I used a German Nazi Soldier I got from unknown toyline, The bighands came from DCU Metamorpho part. I sculpted the arm part so it can fit the figures base arm.](userimages/customs/31500/31282-1.jpg) Sandman Marvel Universeby riverspoonsPresenting the 4th figure for my Series 5 Marvel Universe Avengers Riverspoons Custom Series!
SANDMAN
I used Luke Cage figure for this custom, the up...6 comments | ![[Sandman] Spider-man classics Juggernaut, sculpted headgear, boots and body suit. vinyl for shoulder pads, belt and neck band. button for buckle. removeable left arm, with BAF movie Sandman and the Juggy arm. Right arm is from ML Mr. Fantastic. G2G GLORY to GOD! Talk about it!
THIS CUSTOM IS PART OF VOLUME 2 OF MY INCREDIBLE HULK'S GREATEST HITS SERIES
created Jan. 24, 2011](userimages/customs/30500/30227-1.jpg) Sandman Marvelby fastfreddieSpider-man classics Juggernaut, sculpted headgear, boots and body suit. vinyl for shoulder pads, belt and neck band. button for buckle. removeable lef...11 comments |
![[Sandman] Used wood manikin as skeleton,scupted some muscles and weapons,used hot glue to gice it mass...Hope you like it!](userimages/customs/24000/23737-1.jpg) Sandman Sandmanby DanilkoUsed wood manikin as skeleton,scupted some muscles and weapons,used hot glue to gice it mass...Hope you like it!...1 comments | ![[Sandman] Sandman in his costume from the original Nova series. I used a Dc Universe body and am Ares head. His shoulder cuffs are made from plastice covered with Apoxie Sculpt.
Check out Custom MasterPieces on My Space. They have contest and a hall of fame to vote on!](userimages/customs/22500/22214-1.jpg) Sandman Marvel Legendsby 6700curtisSandman in his costume from the original Nova series. I used a Dc Universe body and am Ares head. His shoulder cuffs are made from plastice covered wi...2 comments |
![[Golden Age Sandman] The base was a DCUC Question. The jacket came from a Riddler figure and some random cape & gun. The rest was sculpted.](userimages/customs/21500/21468-1.jpg) Golden Age Sandman | ![[Sandman Death Figure] Here's another Sandman figure I finished awhile ago..
Death was a Heroes figure...not sure of her name, the Jekyll and Hyde chick.
She was a pretty easy custom, basically just a little face, boot, jewelry and belt sculpting,
a repaint and some glue on hair.
5 Endless to go....](userimages/customs/21500/21455-1.jpg) Sandman Death Figure Sandmanby missharleyquinnHere's another Sandman figure I finished awhile ago..
Death was a Heroes figure...not sure of her name, the Jekyll and Hyde chick.
She was a pretty e...4 comments |
|