![[Scarecrow] "The Wonderful Wizard of Oz" is an anime adaptation based on four of the original Oz books by L. Frank Baum.
The Scarecrow used to stand in the middle of a large corn field in the Munchkin Country and was supposed to frighten the crows (but failed at this task), until he met in Dorothy on her way to the Emerald City. The "brainless" Scarecrow joins Dorothy on her journey in the hope that The Wizard will give him a brain. Even though he does not believe it yet, the Scarecrow already has a sharp brain full of brilliant ideas, and he proves this throughout the whole journey.
I love the series and Scarecrow was always my favorite character, so I deceided to give it a go. The pose is inspired by the opening credits, where Scarecrow is walking on the Yellow Brick Road. Sculpted from scratch and painted with several different brands of model paint.
Thanks for looking!](userimages/customs/48500/48017-1.jpg) Scarecrow | ![[Scarecrow] "Fear defeats more people than any other one thing in the world."
--Ralph Waldo Emerson (1803-1882)
Introducing the next in my 'line' of Batman Rogues' Gallery:
Dr. Jonathan Crane, aka: THE SCARECROW!!
I started this a few months back, as a result of a poll of what new non-commission figure I should make next on my FB page. In between a ton of commissions, I finally got it done, and here he is!
While I work on these Batman characters,I'm trying to take these well known villains and put my own special spin on them while keeping true to their basic traits. I really wanted a SCARY Scarecrow, that looked like an actual Scarecrow might. No fancy gas masks, no syringe fingers; just a beat up, nasty looking pile of thrift store clothing stitched together just the right way to scare the bejeezus out of anyone.
I also gave him a patched up top hat. I know, not the traditional pointy hat you usually see on him, but I gave him some straw and an autumn leaf sticking out](userimages/customs/47500/47386-1.jpg) Scarecrow |
![[Steampunk Oz - Scarecrow] Hello to everyone on the Realm. I have been working on this set for some time now and am ready to share. Figured it was perfect timing since the new Oz movie comes out soon. Hope you dig and sound off in the comments if you love or hate it. Forth Up is ScareCrow.
Recipe:
Base - TDK Movie Masters Joker
Hands - Arnim Zola Baf hands
Head - FantomX
CKCastings TopHat
Mcfarlanes Akira Kaneda boots with added cogs
Sculpted Cane
Random Goggles from some old anime bust toy](userimages/customs/47500/47371-1.jpg) Steampunk Oz - Scarecrow DC Universeby TextureMeHello to everyone on the Realm. I have been working on this set for some time now and am ready to share. Figured it was perfect timing since the new O...14 comments | ![[Scarecrow ( Batman Begins)] Been a while. Working on 2 customs at once (and having an idea for a new one) I was waiting on something to arrive and had spare time on my hands. I had a MM Jim Gordon lying around with a messed up face and thought of how cool the suit looked. It reminded me of scarecrow. Since the face was messed up I decided to cover it and make scarecrow. I sculpted mask from scratch and that is it. It turned out cool but could be better. Let me know what you think!](userimages/customs/46500/46489-1.jpg) Scarecrow ( Batman Begins) Movie Mastersby Jmanjot CustomsBeen a while. Working on 2 customs at once (and having an idea for a new one) I was waiting on something to arrive and had spare time on my hands. I h...11 comments |
![[Dark Night of the Scarecrow] Watching horror movies on Halloween I was inspired to make a Dark Night of the Scarecrow figure. It's mostly made from NECA Jason Parts. Remake body with a part 7 rotted shirt, part 2 head that I added the second eye and mouth hole and pitch fork. The cloth coat is from a punisher figure. A fun little kit bash. Update. I added blood and straw. Made a base. Hope you guys like it.](userimages/customs/44000/43997-1.jpg) Dark Night of the Scarecrow Horrorby mrghodWatching horror movies on Halloween I was inspired to make a Dark Night of the Scarecrow figure. It's mostly made from NECA Jason Parts. Remake body w...3 comments | ![[Scarecrow] another character from the series...scarecrow. same base. sculpted the mask gave it a brown suit to match the look overall and added a real "noose" for the effect.thanks again for looking and God bless.](userimages/customs/43500/43444-1.jpg) Scarecrow |
![[Scarecrow] Here is my 2nd 6.00"+ custom. Played the video game Arkham Asylum and really liked the character a lot but prices for the released figures are insane. So in the end, I decided to make over a Green Lantern Scarecrow. Nothing special here, just a heavy repaint.
Recipe:
Base figure: Green Lantern Scarecrow](userimages/customs/43500/43128-1.jpg) Scarecrow Batmanby Phantom35Here is my 2nd 6.00"+ custom. Played the video game Arkham Asylum and really liked the character a lot but prices for the released figures are in...4 comments | ![[Scarecrow (Marvel Universe Scale)] Continuing with my Nolan trilogy characters in Marvel Universe scale, here I present you with Doctor Crane, aka Scarecrow. His head was sculpted from scratch using the Movie Masters figure as a reference, so every seam, cut etc was replicated. The puff of fear gas is removable and made of plexible plastic. This Scarecrow is now ready to terrorize your Marvel Universe, Star Wars, or even G.i.joes!! Thanks for checking it out](userimages/customs/42500/42246-1.jpg) Scarecrow (Marvel Universe Scale) |
![[Scarecrow - Jonathan Crane (Cillian Murphy)] I've always wondered why Mattel never gave us an unmasked Scarecrow for the Movie Masters collection, and decided to make one as several customisers have before. The base body is from a Movie Masters suit Scarecrow, with twisty ties for the vest and sculpt for the tie underneath. The coat is from a Movie Masters Joker with bits of cloth from a Scarecrow mask accessory glued at the shoulders and the head is from a Spider-Man movie Norman Osborn figure (sanded down to reduce the wrinkles and repainted), with spectacles cut out from bubble packaging (that part was a pain). The gas cloud is some cotton wool glued to a small plastic tube (removeable).](userimages/customs/41500/41382-1.jpg) Scarecrow - Jonathan Crane (Cillian Murphy) Movie Mastersby JeddTheJediI've always wondered why Mattel never gave us an unmasked Scarecrow for the Movie Masters collection, and decided to make one as several customisers h...10 comments | ![[Movie Masters Scarecrow (Suit Version)] Shaved off those strange little wingers he had on his mask to make his head more streamlined as it appears in the film. Repainted the parts where I cut. Widened the grip of his right hand into more of a "reaching" pose (also allows him to more easily hold the bottle).
Accessories:
-The bottle of kerosene is made from part of a clear push-pin and a segment of clear plastic from the tube of a mechanical pencil...and yes, there is ACTUAL kerosene sealed inside...well...not really...but there IS some water in there!
-The Zippo lighter is a hand carved piece of plastic (same as Joker's auto-Glock) with a small piece of clear, yellow plastic glued to the top to simulate the flame. Painted chrome and sealed with clear coat.
Honestly...the accessories took a LOT longer than the actual figure mod. I was considering giving him a necktie...but once you lose your medical license you really lose all motivation to look "nice"...am I right or am I right?
"You want MY a](userimages/customs/41500/41248-1.jpg) Movie Masters Scarecrow (Suit Version) Movie Mastersby KnightTakesPawnShaved off those strange little wingers he had on his mask to make his head more streamlined as it appears in the film. Repainted the parts where I cu...2 comments |
![[Scarecrow] Head: Modified Snake Eyes
Rest of body/cloak: POC Zartan](userimages/customs/41500/41182-1.jpg) Scarecrow | ![[Scarecrow] This is a minor update to my previous Scarecrow custom. I wasn't too happy with the coat, so I made a new white one. Then I splattered the figure with red paint to mimic blood. Enjoy!](userimages/customs/40500/40408-1.jpg) Scarecrow Batmanby BalisconThis is a minor update to my previous Scarecrow custom. I wasn't too happy with the coat, so I made a new white one. Then I splattered the figure wi...4 comments |
![[Scarecrow] Similar customs have been done several times, so this is another conversion of a DC Direct Yellow Lantern Scarecrow into a more regular-looking version of the Batman villain. The figure would have been a perfect default Scarecrow if not for the Yellow Lantern styling. I dremelled down and painted over the chest symbol, and painted over the yellow bits of the figure. The belt is made from string from the Movie Masters Scarecrow mask accessory, and the bandages on his wrists are from the same thing.
Updated with new paints - a more even brown for the coat, and a beige-brown for the trousers.](userimages/customs/40500/40124-1.jpg) Scarecrow DC Directby JeddTheJediSimilar customs have been done several times, so this is another conversion of a DC Direct Yellow Lantern Scarecrow into a more regular-looking versio...8 comments | ![[Scarecrow] This was just a repaint i really wanted a good scarecrow for my rogues gallery and so i picked up this guy the yellow lantern corps scarecrow. well with a bit of paint and time the yellow lantern is no more this is just the good ole scarecrow back to scare everyone in gotham......to death!!](userimages/customs/40000/39711-1.jpg) Scarecrow Batmanby JokerdreadsThis was just a repaint i really wanted a good scarecrow for my rogues gallery and so i picked up this guy the yellow lantern corps scarecrow. well wi...3 comments |
![[Scarecrow] Base: Loki, re-sculpted large part of the body. I replaced the boots by a Legolas and used the skirt of the same Legolas to do the hem of shirt. The strings are real. Painting 100% vinylic.](userimages/customs/39000/38721-1.jpg) Scarecrow Marvel Legendsby Leo CustomsBase: Loki, re-sculpted large part of the body. I replaced the boots by a Legolas and used the skirt of the same Legolas to do the hem of shirt. The s...5 comments | ![[B3gw528 Scarecrow | Dr Crane] "Hush, little baby, don't say a word, Mama's gonna buy you a mockingbird.
And if that mockingbird don't sing, Mama's gonna buy you a diamond ring.
And if that diamond ring turns brass, Mama's gonna buy you a looking glass.
And if that looking glass gets broke, Mama's gonna buy you a billy goat.
And if that billy goat doesn't pull, Mama's gonna buy you a cart and bull.
And if that cart and bull turns over, Mama's gonna buy you a dog named Rover.
And if that dog named Rover won't bark, Mama's gonna buy you a horse and cart.
And if that horse and cart falls down, Well you'll still be the sweetest baby in town."
i wanted to do the original scarecrow like dcsh and then no customizing needed but he was "hard to get a hold of" this guy was "easier"
so i got him and sanded down chest and painted coat (not very well i ran out of brown)
but i added some piped that go from a little can on belt through coat to his right arm
each attached to each finger and th](userimages/customs/39000/38526-1.jpg) B3gw528 Scarecrow | Dr Crane Batmanby Chester001"Hush, little baby, don't say a word, Mama's gonna buy you a mockingbird.
And if that mockingbird don't sing, Mama's gonna buy you a diamond rin...4 comments |
![[Scarecrow] I wanted to take a different take with this Scarecrow. The body was a Creeper with a sculpted head. Yet again, the glove was inspired by the video game version.](userimages/customs/37500/37362-1.jpg) Scarecrow Batmanby BalisconI wanted to take a different take with this Scarecrow. The body was a Creeper with a sculpted head. Yet again, the glove was inspired by the video gam...4 comments | ![[Red Lantern Scarecrow] What's up everyone!! continuing with my Red Lantern Corps: Rougues Gallery...and the newest member is Scarecrow, yes I know he was a Yellow Lantern but that's why I like customizing because I can do whatever I want :) These Lanterns exist on Earth:3421 (somewhere in my head) with this new corps on the rise the only question is Who will join next ?
RL Scarecrow was made with a modified Movie Master Scarecrow head and a DCUC Black Lantern Abin Sur, the logo piece is sculpted and the logo itself is hand painted, his construct was a MU powerblast modified to fit Scarcrows wrist and the end fitted with a crystal skull all painted clear red
If you check my W.I.P thread over in the forums (Custom Workstation) I will be uploading pics on how I do the red paint for my Red Lantern Corps
Let me know what you think ?](userimages/customs/37000/36999-1.jpg) Red Lantern Scarecrow DC Universeby 3bcustomsWhat's up everyone!! continuing with my Red Lantern Corps: Rougues Gallery...and the newest member is Scarecrow, yes I know he was a Yellow Lantern bu...16 comments |
![[Scarecrow] SCARECROW
head
body
legs-evil ash
hands-wolverine
arms-octopus
hood-fabric
jacket-tna
this guy has some crazy arms,they bend all the way
made from dr octopus tentacles
thats my take on SCARY SCARECROW...](userimages/customs/36500/36384-1.jpg) Scarecrow D.C. Universeby megatrooperSCARECROW
head
body
legs-evil ash
hands-wolverine
arms-octopus
hood-fabric
jacket-tna
this guy has some crazy arms,they bend all the way
made from ...2 comments | ![[Scarecrow] Scarecrow
Didn't have a scarecrow in my Batman Collection...
SO I made the Sinestro Corps one more regular looking
Really liked the Arkham version as well
So I gave him a toxin claw
I added some fabric to make him look a bit more grimier.
I like the way it turned out
Hope you guys do too](userimages/customs/36500/36278-1.jpg) Scarecrow D.C. Universeby JonnyVuScarecrow
Didn't have a scarecrow in my Batman Collection...
SO I made the Sinestro Corps one more regular looking
Really liked the Arkham version as...16 comments |
![[Scarecrow] I took a yellow lantern Scarecrow and swapped out the lower arms for a gotham thug's, dremelled off the symbol and belt, and repainted.](userimages/customs/36000/35684-1.jpg) Scarecrow Batmanby Xysma the WarhorseI took a yellow lantern Scarecrow and swapped out the lower arms for a gotham thug's, dremelled off the symbol and belt, and repainted....6 comments | ![[Scarecrow (Arkham Asylum)] DCU Mini #15: Scarecrow...Happy New Year!
Today I bring to you Scarecrow who I based off of the Arkham Asylum game, I know he is not accurate but felt this was a good look for him. Hope you like this one!
Head: MU Hand Ninja (modified to fit, the head was to large for the neck peg)
Face Mask: G.I.Joe25th Fodder
Body: R.O.C Rex the Doctor
Lower Right Arm/Gauntlet: R.O.C Accelarator suit
Right Hand/Claw: R.O.C Rex
Scarf: P.O.C Storm Shadow](userimages/customs/36000/35595-1.jpg) Scarecrow (Arkham Asylum) DC Infinite Heroesby 3bcustomsDCU Mini #15: Scarecrow...Happy New Year!
Today I bring to you Scarecrow who I based off of the Arkham Asylum game, I know he is not accurate but felt...14 comments |
![[Wasteland: Scarecrow-Class Cyborg Unit] Often garbed in rags to avoid detection, the ‘stilt walkers’, or Scarecrow-class cyborgs are often betrayed by their stiff gait and frightening height from a distance. Programmed originally as sentries, these entities have long lost their purpose. Now, left without a directive, they wander aimlessly between populated areas, forever searching.
Presenting WASTELAND: An ongoing Post-Apocalyptic action figure series, featuring highly articulated 6″ scale representations of our horrific future-history. Coming soon to a trading post near you.
This was a figure I entered into CustomCon30 as part of a fictional 'upcoming' toy line of post-apocalyptic action figures. Visit my figure archive to view others in the series.
Also, visit my website's gallery or youtube pages for videos of this, and other custom figures I've made.
Parts:
McFarlane Interlink figure
Movie Iron Man Titanium Man
McFarlane Terminator Skull base (skull)
McFarlane Spawn figure (filter mask, modifi](userimages/customs/35500/35401-1.jpg) Wasteland: Scarecrow-Class Cyborg Unit Originalby blaynescottOften garbed in rags to avoid detection, the ‘stilt walkers’, or Scarecrow-class cyborgs are often betrayed by their stiff gait and fright...8 comments | ![[Scarecrow] scarecrow is a smc hobgoblin, dremeled down the boot and glove cuffs and sculpted new around neck, sleeves and pant legs. the head is an aoa sabretooth with the mask sculpted over, rope around neck and legs are strings from a shredded dog toy soaked in gesso. the pitchfork i made from a kabob stick covered in fixit sculpt, a deadpool select sai for the base and long center peg and 2 legends sais for the outside ones.](userimages/customs/35500/35195-1.jpg) Scarecrow |
![[Scarecrow] I used a joker thug body and joker coat (my previous joker custom) with DCUC Sinestro Corps Scarecrow. I added a dirty paint job to top it all off.](userimages/customs/35500/35003-1.jpg) Scarecrow Batmanby rascalI used a joker thug body and joker coat (my previous joker custom) with DCUC Sinestro Corps Scarecrow. I added a dirty paint job to top it all off....8 comments | ![[The Scarecrow] Took torso from IH Scarecrow combined with lower half of X-Men Origins Wolverine added IH Scarecrow regular series head and painted.Was trying for a look that was close to the animated series.](userimages/customs/35000/34776-1.jpg) The Scarecrow |
![[Scarecrow] head-wolverine that came with sabertooth that wears cowboy hat from wolverine orgins figs
body-green goblin mu fig
I melted the hat and face with a lighter and cut his nose off. I was going for the original Animated series scarecrow and I thought he came out pretty good. hope you like it. I was having a little trouble with pictures because of the shadowing off the hat but hope you guys can see the face good enough.](userimages/customs/34500/34462-1.jpg) Scarecrow | ![[Scarecrow] This is an older custom and I wish i had more photos :(
Head-MM Scarecrow
Hands-GR movie scarecrow
Feet-Lotr figure
Rest-ML Loki
sculpt, hay is from a painted toothbrush, pitchfork is homemade](userimages/customs/33000/32775-1.jpg) Scarecrow Marvel Legendsby Jakey-JakeThis is an older custom and I wish i had more photos :(
Head-MM Scarecrow
Hands-GR movie scarecrow
Feet-Lotr figure
Rest-ML Loki
sculpt, hay is from a...6 comments |
![[Cillian Murphy|Jonothan Crane/Scarecrow Unmasked|B] "I am more than aware that you are not intimidated by *me*, Mr. Falcone. But you know who I'm working for, and when he gets here... "
well same body but the head
on my last one i said that i was looking for a head and now i found one just laying about was my broke dc direct hush series Nightwing the head with some sculpting and glasses ads up an dis great happy i made it
thanks for viewing](userimages/customs/32500/32059-1.jpg) Cillian Murphy|Jonothan Crane/Scarecrow Unmasked|B Movie Mastersby Chester001"I am more than aware that you are not intimidated by *me*, Mr. Falcone. But you know who I'm working for, and when he gets here... "
well ...3 comments | ![[Scarecrow] This a real mix of toys, Body is from Disney Hunchback of Notre Dame Judge Claude Frollo with plasti loka on low body to creat the custom, arms from SP joker, legs from Batman animated scare crow with plasti loka, feet from Batman Returns Bruce Wayne, hat from Toy Biz Batman Bob the goon, and straw hair and straw in hands are from a Marvel Scarecrow](userimages/customs/28500/28418-1.jpg) Scarecrow Super Powersby DjXavo13This a real mix of toys, Body is from Disney Hunchback of Notre Dame Judge Claude Frollo with plasti loka on low body to creat the custom, arms from S...0 comments |
|