![[NEW 52 Joker Skin Mask] paint some hours and foamy with a sculpted articulated head! :D
the jaw opens and closes :D
all tools were made custom as well](userimages/customs/45000/44613-1.jpg) NEW 52 Joker Skin Mask | ![[Fox Demon "Painted Skin" Movie] I would like to try how it is On the shoes of Mr. Patraw, so I decided to make an entry that is from raw materials and the rest are all sculpted and painted.
My inspiration was the Fox Demoness from PAINTED SKIN.
Initially I formed the wire into a human figure then wrapped it and sculpted it slowly with Water Stop clay until it is hardened. Then painted it.
My experience in doing this was so indescribable. I know now how hard it is to make a PATRAW MASTERPIECE.. So guys, every time you see Mr. Patraws works, please give him your applause.. It needs a heart, patience and full dedication to make a single piece.](userimages/customs/44000/43838-1.jpg) Fox Demon "Painted Skin" Movie Animeby cuztomizaI would like to try how it is On the shoes of Mr. Patraw, so I decided to make an entry that is from raw materials and the rest are all sculpted and p...26 comments |
![[Skinhead Markuus] skinhead Markuus
head-wwe
body-wwe
legs-wwe(batista)
t-shirt-white fabric
suspenders-mr sinister s cape
tatoo-chez moi
no ideologie,just "art".](userimages/customs/42000/41721-1.jpg) Skinhead Markuus Marvelby megatrooperskinhead Markuus
head-wwe
body-wwe
legs-wwe(batista)
t-shirt-white fabric
suspenders-mr sinister s cape
tatoo-chez moi
no ideologie,just "art&q...6 comments | ![[Stecassking] I made a resin casting of the rubber "Deka-Keshi" SteCassKing. Then I added a neck joint to allow the head to turn, joints to shoulders and hips. I used Microman (Batman) arms and legs, and the casting's feet. He was a ton of work!](userimages/customs/40500/40385-1.jpg) Stecassking Kinnikumanby WarsmanI made a resin casting of the rubber "Deka-Keshi" SteCassKing. Then I added a neck joint to allow the head to turn, joints to shoulders and ...1 comments |
![[Skinner] I had this Hulkling figure and Im not sure why he ended up being a Skinner, but well anyway, I used a Devils reject head and Vengence ribs and a ponytail, and Sandman pieces on the wrists.](userimages/customs/39000/38900-1.jpg) Skinner Marvel Legendsby boskoesI had this Hulkling figure and Im not sure why he ended up being a Skinner, but well anyway, I used a Devils reject head and Vengence ribs and a ponyt...11 comments | ![[Skinner Predator] Hi there fellow realmers!This is my latest endeavor another pred another day,this is probably one my longest build, took months to finish him as I could not figure what direction to go with this guy. I love the articulation on his arms it just added more poseability. Im a big fan of McF figures cause they are just so detailed, his armour, parts and weapons came from them. The head is of wolf, re-sculpted to obtain his pre-battle damage look. I also sanded the netting which was the most annoying part of the build. I used citadel paints and they're worth it. Thanks for looking guys!](userimages/customs/34500/34470-1.jpg) Skinner Predator Predatorby Valkyriezero1Hi there fellow realmers!This is my latest endeavor another pred another day,this is probably one my longest build, took months to finish him as I cou...18 comments |
![[Halo:Forerunner Prototype Combat Skin] Okay, so after seeing a terminal preview for the Halo: combat evolved remake which depicted a forerunner in their combat skin i decided to make my own with my own spin on it.
This is a Forerunner with a prototype combat skin with AI infused into the armor. The idea is that the AI increases the combat effectiveness of the gear. There are also anti gravity boosters located on the back.
Made from a halo reach spartan, EVA helmet, sculpy, and acrylic coat.](userimages/customs/33000/32762-1.jpg) Halo:Forerunner Prototype Combat Skin Haloby diodemuerteOkay, so after seeing a terminal preview for the Halo: combat evolved remake which depicted a forerunner in their combat skin i decided to make my own...3 comments | ![[Hulk Dark Green Skin] I would like to start out and say that all of my Hulks come from my love of the character but also some of the best customizers on the net inspiring me with Hulk customs such as MadTinker76, Anthony, Jin, Stevid, Fast Freddy, Jade Jaw along with many others Loose collectors Pitt sized McFarlane was awesome, I hope I did not leave anyone off everyone here is inspiring so please help add to the awesomeness which is the realm. So thanks to all you who make this worth while and when I am done with my Marvel collection please be sure MOTU is coming. This is a Planet Hulk that I added a Face Off head to, while filling in all the peg holes. I sculpted the ripping of the pants at the top of the waist, bottom of pants then sculpted up the trap muscles, since I was impressed by anthony's customs looking so sweet and tried to give him more of a realistic than cartoon look with the paint. I started with dark angels green then finally snot green finishing, I thought this gave a nice interesting](userimages/customs/30000/29943-1.jpg) Hulk Dark Green Skin |
![[Hulk Light Green Skin] I would like to start out and say that all of my Hulks come from my love of the character but also some of the best customizers on the net inspiring me with Hulk customs such as MadTinker76, Anthony, Jin, Stevid, Fast Freddy, Jade Jaw along with many others Loose collectors Pitt sized McFarlane was awesome, I hope I did not leave anyone off everyone here is inspiring so please help add to the awesomeness which is the realm. So thanks to all you who make this worth while and when I am done with my Marvel collection please be sure MOTU is coming. This is a mix of the War Hulk upperbody and head mixed with the lower half of the House of M Hulk. I did not like the way the legs of the War Hulk bent over and did not allow him to stand as straight as I would like, so I replaced them with the more poseable HoM legs. Unfortunately I did not want to open the chest to take out the peg, so I ground it down until it no longer poked out too far. I sculpted the ripping of the pants at the top of](userimages/customs/30000/29942-1.jpg) Hulk Light Green Skin | ![[Bark Skin Swamp Thing] Snarling, Skinman swoops down through the air towards me, hatred burning in his feral eyes. Thanks to my armored Bark Skin form, I barely feel his needle-like teeth ripping at my shoulder as we collide. All the bat-like Un-Man gets for his efforts is a mouthful of moss and wood chips, which he angrily spits out, flapping out of reach again before I can return the favor with a blow of my own. While I am almost impervious to his claws and fangs in this state, such durability comes at the expense of mobility and speed. Skinman lands several hits for every one I score on him, but, if nothing else, a tree is patient--fatigue will soon slow Skinman's reflexes, and when it does, my sharp branches will be waiting to embrace him . . .
--------------------------------------------------------------------------------
The idea for this figure came from THQ's 1992 Swamp Thing Gameboy video game (which is based on the animated television show, not the comic book). In said title, beating Dr. Arcane](userimages/customs/30000/29727-1.jpg) Bark Skin Swamp Thing Swamp Thingby PatrawSnarling, Skinman swoops down through the air towards me, hatred burning in his feral eyes. Thanks to my armored Bark Skin form, I barely feel his nee...8 comments |
![[Sharkskin] Here is Sharkskin, a character that had a brief moment of importance in the Atlantis Attack! 90s crossover. I have used on of the zillion versions of movie Hulk that has the right proportions to make him. Head is from XMC Beast, sculpted hair and the strange design over his arms.](userimages/customs/29500/29477-1.jpg) Sharkskin Marvel Legendsby argenta-2008Here is Sharkskin, a character that had a brief moment of importance in the Atlantis Attack! 90s crossover. I have used on of the zillion versions of ...9 comments | ![[Skinner (Sinestro Corps)] After doing a few Green Lantern Corps original members I decided to take a shot at the Sinestro Corps. Here's 'Skinner', aptly named for his razor-sharp claws, bladed crystal hair, and ferocity for collecting the hides of others. He was made from a Low/Maash body, Spawn Ripclaw hands, LCBH Wraarl head, and Sota clear variant Blanka hair. I modded the range of the joints so you could get some really leapy poses from him and the neck joint so he could look almost straight up and support the weight of the hair. His ring-beam came from a clear acrylic drink stirrer painted with Tamiya clear yellow and modded to fit over a finger.](userimages/customs/28500/28484-1.jpg) Skinner (Sinestro Corps) DC Universeby Jin SaotomeAfter doing a few Green Lantern Corps original members I decided to take a shot at the Sinestro Corps. Here's 'Skinner', aptly named for his razor-sha...3 comments |
![[Triceraton Green Skin] Ok Folks, this is my first time in this site,
I have decided to start making simple things
like repainting figues... and then grow up to the top.
I enjoy to try make customs with the old Playmates TMNTs
because its no so common to see. And I like TMNTs.
I found an old Triceraton at an Antique Store. Somebody
lost the orange tail, so I decided to clone a
new one with polyester Resin. (Its not easy to work with that material)
I painted the Armor bust with golden color (not acrylics).
I made some battle damage at the front of the armor.
Afterwords I painted the rest of the pieces with acrylics
and varnish to protect the figure.
In the future I will look for more Triceratons to make the
Dimension X squad.
Kowabunga al last.](userimages/customs/21500/21431-1.jpg) Triceraton Green Skin | ![[T-800 Skin Job] So my sister had a superman that she bought for the Clark Kent in some two pack for a project she did. Being firmly against Superman as a super hero I immediately figured I'd have no problem making him into someone else, you know seeing as I really didn't care for the figure?
Anyway he sat there for weeks with his cape torn off and his symbol sanded off... and nothing, I just couldn't think of anything, and then it hit me like a mac truck! I had a disasembled T-800 from the Terminator Salvation toy line. I started sculpting in the pieces of terminator into the musculature of Superman and it looked great. I added some sculpted pants and a torn shirt. Various fodder pieces went into his gattling gun and the harness he's wearing.
The paint was actually pain staking as simple as he looks. I had to mix all sorts of tans and browns I had to get a remotely flesh looking color, I suck at painting skin tones. The metal was a fun to do, I learned how to paint black, then do a dry brushing of s](userimages/customs/17500/17136-1.jpg) T-800 Skin Job Terminatorby MangaJoeSo my sister had a superman that she bought for the Clark Kent in some two pack for a project she did. Being firmly against Superman as a super hero I...6 comments |
![[Skin] I used falcon and sculp his chin hair, mr fantastics hand, and some other sculpt](userimages/customs/10000/9533-1.jpg) Skin | ![[Skin (Gen X Mod)] Well my Jube mod never completed transaction so in order to sell her on you know whre I thought I'd better fill out a few of her Generation X team mates. First up is Skin - I think this one is a little cleaner looking than my original and doesn't look as thrown together. He's 100% Reed with sculpted hair and chest. The belt is as ever an elastic band and a pin head.](userimages/customs/9500/9439-1.jpg) Skin (Gen X Mod) Marvel Legendsby WingsWell my Jube mod never completed transaction so in order to sell her on you know whre I thought I'd better fill out a few of her Generation X team mat...2 comments |
![[Snake Pliskin] Call me Snake.
Wanted to do this figure for awhile. I had the macfarlane one for awhile but it had no poa.
Recipe:
Sandman upper body
ML Bishop lower body
Movie manaics Snake Pliskin head ,guns, holster.
Dremeled out the head to fit on neck peg full poa.
Dremeled off tattoes on one arm.
Cut off lower body attach Bishop's lower body, Full poa
Dremel a few things off the leg and repainted them
Glued on holster.
Over all I'm pretty happy with it.
Call me Pliskin...](userimages/customs/7000/6512-1.jpg) Snake Pliskin Movie Maniacsby CplHicksCall me Snake.
Wanted to do this figure for awhile. I had the macfarlane one for awhile but it had no poa.
Recipe:
Sandman upper body
ML Bishop lowe...2 comments | ![[FUG and SKINZ] These were made from discarded hero or wrestling action figures with custom designed clothing, masks, spikes and paint.](userimages/customs/6500/6162-1.jpg) FUG and SKINZ Manhuntby BatCrazedThese were made from discarded hero or wrestling action figures with custom designed clothing, masks, spikes and paint....2 comments |
![[Snake Pliskin "Escape from New York"] Starting with his face: I did a whole new sculpted on his jaw and cheeks to give it more of that trade mark Kurt Russell jawline. Sculpted the hair with a little help from my wife and sanded down the sleaves to match his guns.](userimages/customs/4500/4400-1.jpg) Snake Pliskin "Escape from New York" Movie Maniacsby ZombieHunterDStarting with his face: I did a whole new sculpted on his jaw and cheeks to give it more of that trade mark Kurt Russell jawline. Sculpted the hair wi...2 comments | ![[Snake Pliskin] This was a labor of love. In my opinion Snake is the coolest tough guy thus far. He laid down a libral amount of bullets and bodies on both the East and West coast and still had time for a smoke. Good ole one eye, Snake Pliskin. I used several Sigma Joes to come up with a suitable combo. Hope you guys dig em as much as I do Enjoy.
Head- Mcfarlane Snake movie figure
Torso-Sigma Firefly(not the cobra)
Hands- Tunnel Rat
Lower legs and Feet-LT. Stone](userimages/customs/4500/4087-1.jpg) Snake Pliskin |
![[Skin] Another easy head swap - I used magnets as the neck joint was so huge on the human torch. Swapped out the feet with a boxset Mr Fantastic as well as the head and stretched hand. Shaved the flame off the other arm and sculpted the gauntlets. The shorts are from a X-Men the Movie Mystique figure (or the Wolverine trousers of it) and the jacket is a trimmed X-Men 2 Cyclops Trenchcoat. Sculpted feet which turned out to be the hardest when coming to balance but the arm helps!](userimages/customs/2500/2399-1.jpg) Skin Marvel Legendsby WingsAnother easy head swap - I used magnets as the neck joint was so huge on the human torch. Swapped out the feet with a boxset Mr Fantastic as well as t...4 comments | ![[Skinner] I was talking to LWES and he mentioned that he had a figure I need . I suggested that I would make one of his Midnight Friends. We came up with "Skinner" here. I took some liberties with the pictures he sent, but all in all I think it turned out ok. I like the real beard. I had been wanting to try it and this was the perfect chance. let me know what you think.](userimages/customs/2000/1791-1.jpg) Skinner Midnight Sons & Friendsby TMBI was talking to LWES and he mentioned that he had a figure I need . I suggested that I would make one of his Midnight Friends. We came up with "...7 comments |
![[Lara Croft in Black Skintight] Customized this figure after seeing a cover of Lara Croft on a Playstation 2 Magazine cover. Sunglasses are from CyGirls that I spray painted black... And the Uzis are from my 1:6 scale Neo and Trinity figures from the movie The Matrix... who I upgraded to Ultimate Soldier 1:6 scale weapons. The larger Lara Croft Tomb Raider Movie figures... which came in the Combat Training gear and the Motorcycle gear are really rare now... So I was lucky to get a hold of a second Lara figure in the Combat Training gear to customize to stand next to the one I have left in her original Combat Training gear... Though I have added the spray painted black sunglasses to the original Lara as well:)](userimages/customs/500/212-1.jpg) Lara Croft in Black Skintight Tomb Raiderby Will ReidCustomized this figure after seeing a cover of Lara Croft on a Playstation 2 Magazine cover. Sunglasses are from CyGirls that I spray painted black......1 comments | |
|