![[Smokescreen TFP] I used Hotshot as my base and removed all of his flame paint apps. He was then sprayed with red and then I hand painted (so damn aggravating) the white stripe.
His head is a copied Drift face made of super sculpty rubber placed inside a Smokescreen Kreon helmet. I gave him various other details and ended up using to shades of red on him, a darker red for the exterior auto mode, then I matched the factory red to liven him up in bot mode.](userimages/customs/44500/44337-1.jpg) Smokescreen TFP Transformersby ShinobitronI used Hotshot as my base and removed all of his flame paint apps. He was then sprayed with red and then I hand painted (so damn aggravating) the whi...6 comments | ![[Smoke] I couldn't wait for the 4" MK Ninjas to be released but when they finally came out, I was really disappointed. Every figure was the exact same with different colors. On top of that, pretty much everyone had paint defects as well as loose joints. So I decided to make my own. Smoke was pretty simple. I just repainted the body and switched out the head with Thor with some fodder added.](userimages/customs/44000/43519-1.jpg) Smoke |
![[Smoke] Smoke is an original character I came up with. Heres a little back story to set him up.
Quote "I'm proof that "SMOKE" is hazardous to your health."
Like most seekers Smoke was also gifted with a special power, with his being the ablity to become intangible in a smoke like form. Smoke can hold this form for a limited amount of time and if any other transformer is directly exposed to this form it can cause fuel pumping systems to clog and become inactive.
Smokes battle is not with the Autobots alone but sometimes with his fellow Decepticons as most of them find cy-gar addiction aggravating, leaving Smoke alone to complete missions, but this suits him fine.](userimages/customs/39000/38523-1.jpg) Smoke Transformersby ShinobitronSmoke is an original character I came up with. Heres a little back story to set him up.
Quote "I'm proof that "SMOKE" is hazardous to...5 comments | ![[Human Smoke] A wolverine top half,a lotrs lower half (legs).Lotrs head with sculpted mask,hair from a mcfarlane figure.Thin craft foam armor, womens fake fingernail armor,on forearms and legs.thin metal wire used on the belt.Thanks for looking,Mike.](userimages/customs/38500/38345-1.jpg) Human Smoke Mortal Kombatby mjb3777A wolverine top half,a lotrs lower half (legs).Lotrs head with sculpted mask,hair from a mcfarlane figure.Thin craft foam armor, womens fake fingernai...7 comments |
![[Mortal Kombat SMOKE] Hey everyone! I made Smoke for my buddy Nick. He loves Mortal Kombat, especially all the ninja's. SO I really enjoyed making this guy and can't wait to do some more Mortal Kombat characters. Here was the recipe.
Head & Body: X-Men Classics Magneto
Arms: Bullseye
Sculpted shoulder pads, Knee and leg pads and sculpted the hair which was somewhat difficult to get the flowing to the side motion!
The base is from Marvel Select Hawkeye, installed a red LED inside the center of Ultron's fallen body and on/off toggle switch in the back. Love how it all turned out and hope everyone loves it also! Here ya go Nick!](userimages/customs/36500/36094-1.jpg) Mortal Kombat SMOKE Marvel Legendsby TheRealSupaManHey everyone! I made Smoke for my buddy Nick. He loves Mortal Kombat, especially all the ninja's. SO I really enjoyed making this guy and can't wai...7 comments | ![[Mortal Kombat 9 MU Scale Smoke] Hey guys.This is my MK9 Smoke custom figure it is in scale with the new 3 inch MK figures and any other 3.75 inch figures.Anyway the base is a MU Mr.Fantastic from the MU Secret Wars two pack the armor,hair and mask is all sculpted on the hair was painted with black then dry brushed silver and a bit of white.The figure is fully articulated because the loincloth is a leather material.And it is detailed to look just like Smoke in MK9.Enjoy and please vote for me comments are welcome :)](userimages/customs/36000/35822-1.jpg) Mortal Kombat 9 MU Scale Smoke Mortal Kombatby FolsomaticustomsHey guys.This is my MK9 Smoke custom figure it is in scale with the new 3 inch MK figures and any other 3.75 inch figures.Anyway the base is a MU Mr.F...4 comments |
![[Mortal Kombat Deception Smoke] Hey guys as most of you should know by now that I love Mortal Kombat I am probably the biggest MK fan Haha!Smoke is one of my favorite MK characters I already posted a MK3 version of this guy and decided to make this version as well.Anyway,its fully sculpted and probably my favorite custom so far.I'm not really sure who I used for the base but the gloves,the mask,boots,and shoulder armor are all sculpted the loincloth and tunic is a fake leather material that can be painted on.Enjoy!Comments are always welcome.](userimages/customs/36000/35735-1.jpg) Mortal Kombat Deception Smoke Mortal Kombatby FolsomaticustomsHey guys as most of you should know by now that I love Mortal Kombat I am probably the biggest MK fan Haha!Smoke is one of my favorite MK characters I...3 comments | ![[Smoke] This is the last figure in my collection (for now) and the first one I made. A simple Sektor repaint. The second picture shows my entire 12" Mortal Kombat collection...](userimages/customs/36000/35653-1.jpg) Smoke Mortal Kombatby jonatanmkThis is the last figure in my collection (for now) and the first one I made. A simple Sektor repaint. The second picture shows my entire 12" Mort...8 comments |
![[Human Smoke] Another Scorpion's repaint. I modified his mask a little bit and painted his eyes...](userimages/customs/36000/35618-1.jpg) Human Smoke | ![[Smoke Mk9] black spray paint , grey spray paint silver tape n clay for the mask.](userimages/customs/34000/33764-1.jpg) Smoke Mk9 |
![[Mortal Kombat - Smoke] This is just a straight up repaint.
Made a smoke out of sub-zero.
Hope you guys like it](userimages/customs/34000/33517-1.jpg) Mortal Kombat - Smoke | ![[Mortal Kombat Smoke] Well this the time iv sculpted something fully so be kind. Just took the superman red figure, some sculpting and painting. This was a trial and error exercise. So any tips of help grateful](userimages/customs/33500/33465-1.jpg) Mortal Kombat Smoke Mortal Kombatby shadow-elWell this the time iv sculpted something fully so be kind. Just took the superman red figure, some sculpting and painting. This was a trial and error ...1 comments |
![[MK3 Cyber Smoke] Mortal Kombat is my favorite video game and Smoke is my second favorite MK character(next to Scorpion)so of course I was gonna make him with three more customs of him coming as well.This is his MK3 cyber ninja design but he still goes great with my made up designs of Cyrax and Sektor(also posted here and all in a group shot in the last pic).To the figure!!!!!The base is a ML Bullseye with alot of trimming.He is fully sculpted(basicly everything but the thighs which still needed a bit to fill the hole in the leg).The dreads are frome a broken 360 controller charger.Boy was he tough but I'm very happy with the results!ENJOY!!!Comments are always welcome :)](userimages/customs/33500/33378-1.jpg) MK3 Cyber Smoke Mortal Kombatby FolsomaticustomsMortal Kombat is my favorite video game and Smoke is my second favorite MK character(next to Scorpion)so of course I was gonna make him with three mor...2 comments | ![[Smoke] This Is One Of My Favorite MK Characters Smoke In His MK9 Outfit Please Rate And Comment](userimages/customs/33500/33160-1.jpg) Smoke |
![[Cyber Smoke] I got this idea off punkninjaman and some other members.
After making my cyber sub-zero( Check it out )
This is just a repaint of Iron man Mark 4
With some sculpting to the head.
I also added some chains and a sai which were inspired by smoke in other mk games
Hope you guys like it](userimages/customs/32500/32001-1.jpg) Cyber Smoke Mortal Kombatby JonnyVuI got this idea off punkninjaman and some other members.
After making my cyber sub-zero( Check it out )
This is just a repaint of Iron man Mark 4
Wit...6 comments | ![[Smoke (Mortal Kombat)] Here is my own version of one of my favorite characters smoke from mortal kombat fame. I used and iron man figure. A bit of apoxie on the face and headphone wire for his dreads. And a full repaint with citadel colour and model master paints. Comments are appreciated,thanks for looking](userimages/customs/30000/29805-1.jpg) Smoke (Mortal Kombat) Mortal Kombatby punkninjamanHere is my own version of one of my favorite characters smoke from mortal kombat fame. I used and iron man figure. A bit of apoxie on the face and hea...1 comments |
![[Sidescreen (Sideswipe + Smokescreen)] I basiclly took the torso from sideswipe,put smokescreen's head on it, and glued the it to smokescreens body.](userimages/customs/29000/28703-1.jpg) Sidescreen (Sideswipe + Smokescreen) | ![[Deluxe Smokescreen] This is my custom deluxe class smokescreen. The visor on his face was a bit too light so I painted it with tamiya clear blue to make it just a bit darker.](userimages/customs/28000/27501-1.jpg) Deluxe Smokescreen |
![[The Smoke Monster] This is my first custom, so be gentle...
Here is my version of the Smoke Monster from what I consider one of the greatest television shows of all time: LOST.
I've had it in my mind to do this for a while since I saw an awesome diorama on another website.
The Monster was made using a foam fish that I covered with almost a whole pound of model railroad foliage. I then spray painted it black. Thanks for any comments or constructive criticism. Stay tuned for more LOST customs.
4 8 15 16 23 42](userimages/customs/23500/23445-1.jpg) The Smoke Monster Lostby LostMatthewThis is my first custom, so be gentle...
Here is my version of the Smoke Monster from what I consider one of the greatest television shows of all time...4 comments | ![[Human Smoke] I figured since I already did the cyborg version, why not the original? Sorta styled like the UMK3 version, but with my own additions.
Base: Bullseye
Head: Modified Noob Saibot head
Vest: Black leather-like vinyl
Belt: Wraal
Spear: Real chain with piece of Black Manta's gun
There's also a rare earth magnet in his back so the chain will stay on easier](userimages/customs/16000/15520-1.jpg) Human Smoke Mortal Kombatby flawpunkI figured since I already did the cyborg version, why not the original? Sorta styled like the UMK3 version, but with my own additions.
Base: Bullseye...7 comments |
![[Smoke] Well, something new for the realm! So far, I've not seen anyone else do this custom, which is a shock considering how he's one of my favorite MK characters, mainly his MK3 and UMK3 versions, but still, great. Cyborg Smoke here was made from a movie masters Dark Knight figure, with hands from DCUC Superman Red, since I used the DK hands on my old Xmen Deadpool. The head was completely sculpted with FIXIT onto a dremeled down black panther head, then drilled a hole down into it, then strung together some of the cord from a sigma 6 parachute, and attached them inside his head so they don't come off. sculpted some armor here and there, and gave him a gun metal paint job, and then mixed gun metal Model masters with Silver Chrome Trim model masters to get the color for the rest of the body. hope everyone enjoys!
Oh, and the first photo was the only one photoshopped, just added some smoke around his feet, no biggie.](userimages/customs/14500/14323-1.jpg) Smoke Mortal Kombatby flawpunkWell, something new for the realm! So far, I've not seen anyone else do this custom, which is a shock considering how he's one of my favorite MK chara...10 comments | ![[TFA Smokescreen] Heres my attempt at a TFA styled Smokescreen. As you probly guess he was made from a TFA Jazz. I repainted the entire body in his G1 scheme and applied the white stripe via Reprolables.
The head was the hardest part as this is a moddified Jazz head. This took a lot of sculpting and shaving to get the look and funtionality correct.
The gun is actually spare parts I had in my fodder bin.](userimages/customs/14500/14131-1.jpg) TFA Smokescreen |
![[G1 colour Smokescreen] I removed the regular decals with white spirit. Then it was a simple repaint and I added some decals from repro labels which they made for me on request.](userimages/customs/12000/11925-1.jpg) G1 colour Smokescreen | ![[Smokescreen] Smokescreen is basically a repaint of the Universe Classics Prowl. However I did sculpt a lower jaw on him so he'd resemble the Alternators Smokescreen. Testors Artic Metallic Blue was used and I snagged a bunch of stock/rally car decals to pimp him out with. Boom, instant Smokescreen!](userimages/customs/10000/9829-1.jpg) Smokescreen Transformersby Jin SaotomeSmokescreen is basically a repaint of the Universe Classics Prowl. However I did sculpt a lower jaw on him so he'd resemble the Alternators Smokescree...1 comments |
![[Smokescreen] What does a Transformers fan do when he has another Riccochette around make a G1 SMOKESCREEN!!
I stripped the original figure down with finger nail polish remover then washed with soap and water. After tearing him apart I sprayed his base coat with Krylon fusion. I then hand painted the black and white sections and the face.
With body done I moved to the weaponry. I painted the gun totally silver then dry brushed the Autobot symbol for some extra flash. The rocket launchers are Wolverines Showdown launchers painted silver then I attached the firing sticks to some GI Joe missiles. My dog got ahold of the missiletips so I cut those off and replaced with mechanical pen caps!!
The final thing I added to him was a smoke attachment for his muffler. I cut the smoke off of a Hobgoblin glider and made it attachable for him. Smoke screen had the ability to produce a very sticky smoke that made visibility nill and interferred with mehcanical systems.
Hope ya like'em!](userimages/customs/3500/3369-1.jpg) Smokescreen | ![[Smokescreen Battle Damage] This was my FIRST battle damage Transformer custom, not including the prototype previous to this one.
I had this idea early in 2007 when a figure had fallen off a shelf and broke in 2 at the waist....what to do ?....a little "experiment in terror" from the depth of my twisted little mind (yes, little). I had nothing to lose except a broken figure, so after the prototype(will submit later) I decided to go ahead and do this to other figures(that were not broken....sometimes even opening new outta the package for this treatment).
Features: Blown off hand w/ exposed/damaged wiring/circuitry, laser wounds/bleeding oil, shot out tires, dented fenders/hood & road rash and general combat damage.
This was sold a few months ago, never transformed so no car mode pics - sorry....oh yeah , and well before the cracked glass idea from greymonk.
TTT](userimages/customs/3500/3328-1.jpg) Smokescreen Battle Damage |
![[Smokescreen G1] Hey guys, for this custom smokescreen I had to take him apart and soak him in a jar of paint thinner for a few hours. That allowed the decals to just rub off when I was ready to strip them. After cleaning all the thinner off (which sucks by the way), I removed the roof, hood and trunk of the car and sprayed it red. Then I painted the white stripe across the side of the car. Finally I made a custom sticker (38) on photoshop and stuck the bad boy on!! The autobot logo comes from Reprolabels. This was one that really tested my patience. Hope you guys enjoy and thanks for looking!!](userimages/customs/3500/3160-1.jpg) Smokescreen G1 | |
|