![[Union Jack] Alil late withis fella, but here's the 2nd half England's dynamic duo, UNION JACK! I've seen alotta great Jacks on here, so i've decided it's my turn. I didnt want him to be too glossy like Cap Britain so i tried to give him a more gritty look, like just coming from battle. I think he looks good next to the Captain.
recipe
base - roml bucky cap
head - ml ronin
knees down - ml punisher - they mesh perfectly
machine gun - ml 1st app cap (i think)
let me what you think,](userimages/customs/50000/49833-1.jpg) Union Jack Marvel Legendsby king xornAlil late withis fella, but here's the 2nd half England's dynamic duo, UNION JACK! I've seen alotta great Jacks on here, so i've decided it's my turn...5 comments | ![[Union Jack V2] Here is my 2nd attempt at a Union Jack. A more beefier version than the one they gave us.
Head-Moon Knight
Torso- FO Puny
Legs-ML Ninja
boots -wwe wrestler
Hope you like it.
Steve](userimages/customs/49000/48882-1.jpg) Union Jack V2 Marvel Legendsby StevidHere is my 2nd attempt at a Union Jack. A more beefier version than the one they gave us.
Head-Moon Knight
Torso- FO Puny
Legs-ML Ninja
boots -wwe wr...12 comments |
![[Union Jack] WWE Triple H The rest is Sculpting, Paints and Weapons From the Fodder Bin](userimages/customs/42000/41589-1.jpg) Union Jack | ![[Union Jack] A nice simple repaint this time. Swapped the head for a re-sculpted Ronin head, lower legs for ultimate cap, modded the belt and repainted.
The lines were a bit annoying but they will do for my needs.
Hope you like.](userimages/customs/41500/41059-1.jpg) Union Jack |
![[Union Jack] Well I've been wanting to make a Union Jack out of a mattel wwe figure ever since I made my Captain Britain. Basically I wanted him to be recognizable but also have a somewhat realistic military vibe going for him. I felt there was no need to overkill it with weapons and accessories like my DP, so he just has his 6 shooter, knife, assault rifle and the AK.
Head: Todd Rice (with sculpted over mouth)
Body: Pillman (lots of fodder and modding/fabricating pieces for his gear, holster & pouches from HML Union Jack)
Arms: Terry Funk
Hands: HML Loki
Then of course he got a whole brand new paint job with the ever so time consuming Union Jack symbol done freehand (longest part of the whole project, lol.)
Thanks for looking!](userimages/customs/39500/39482-1.jpg) Union Jack Marvel Legendsby ShinobitronWell I've been wanting to make a Union Jack out of a mattel wwe figure ever since I made my Captain Britain. Basically I wanted him to be recognizabl...30 comments | ![[Union Jack] Repaint Moonknight with Lara Croft's pieces](userimages/customs/35500/35417-1.jpg) Union Jack |
![[Union Jack (Joey Chapman)] I already have a Union Jack that is 6" scale, but since 90% of my figures are 7" scale, I decided to make one. To avoid argument that took place on my last UJ, my choice of the Black Uniform...in Captain America Red Menace Ultimate Collection,as Cap & UJ are sneaking in the dark...Cap asks if he is up to more "Skulking". Union Jack responds " Why else do you think I where the Black Suit?" I took the belt from my 6" figure & used it after a massive repaint (Black overlay with painstaking torso flag). The Silver dagger hilt was undersized, so I used a Capt. Jack Sparrow Sword Hilt that I cut down. Rubberbands are the straps. I also chose not to file down the Gauntlet & Boot edges from Starman, & leather glossed them as I like that look better than tights fottie looks. The left hand with the gesturing pose I placed on the Dagger sheath as to look like he is about to slide it up & pull the Dagger. I'm happy with the outcome. Any t](userimages/customs/34500/34156-1.jpg) Union Jack (Joey Chapman) Invadersby CapSoldierI already have a Union Jack that is 6" scale, but since 90% of my figures are 7" scale, I decided to make one. To avoid argument that took p...3 comments | ![[Rose Tyler Dr Doctor WHO Union Jack] Rose Tyler has been given a Union Jack make over and Chest resculpting to match her from the television series.](userimages/customs/34500/34149-1.jpg) Rose Tyler Dr Doctor WHO Union Jack Doctor Whoby wotterzRose Tyler has been given a Union Jack make over and Chest resculpting to match her from the television series....0 comments |
![[Dalek DR WHO Union Jack British] Remote Controlled 5-6 inch Dalek.
Given a custom paint job in a Union Jack Design.
Gives a Great British classic a very Great British finish.](userimages/customs/33500/33247-1.jpg) Dalek DR WHO Union Jack British Doctor Whoby wotterzRemote Controlled 5-6 inch Dalek.
Given a custom paint job in a Union Jack Design.
Gives a Great British classic a very Great British finish....2 comments | ![[Union Jack] I wanted my st of union jack had a look more like a soldier of WWII, and what better to wear a joe for that.
Just a bit of epoxy to the mask and the rest whit a good paint job.](userimages/customs/33500/33015-1.jpg) Union Jack Marvel Universeby escorpcustomsI wanted my st of union jack had a look more like a soldier of WWII, and what better to wear a joe for that.
Just a bit of epoxy to the mask and the r...1 comments |
![[Union Jack] I've always been partial to Union Jack, probably because he was the first English super hero I read about. This custom was one that I was wanting to do for a long time, but didn't trust my abilities at first.
sanded down the DD logo, and used a dremel to drill a hole in his left fist to hold the dirk (which also had the handle sanded down to fit in his fist). His revolver, holster and the submachine gun (not really visible yet, but I'll update later with another pic) I won from a certain website . I used sculpt for the front of his mask, the pouches and to fill in the hole from where I removed the nunchuck holster. To paint the flag, I painted the entire chest area white, then masking taped off the white strips. Then I painted the body blue and red and finally did his eyes last. His red straps are pieces of leather strips painted.
Thanks for looking!](userimages/customs/31000/30537-1.jpg) Union Jack Marvel Iconby KarcossaI've always been partial to Union Jack, probably because he was the first English super hero I read about. This custom was one that I was wanting to d...4 comments | ![[Union Jack] I always wanted to do a Union Jack but never got around to doing one, even though I really like the Hasbro version I still wanted to do one, I started him yesterday morning and just finished with him. Started with FO Punisher, thighs are from a ML Ninja and casted Cap belt. Hope you like him.
Steve](userimages/customs/30000/29976-1.jpg) Union Jack Marvel Legendsby StevidI always wanted to do a Union Jack but never got around to doing one, even though I really like the Hasbro version I still wanted to do one, I started...21 comments |
![[Lara Croft (British Pride Union Jack T-Shirt)] Based on a variant figure of another series, comes this Tomb Raider Underworld Union Jack Lara Croft. Our favorite videogame heroine sporting her British pride. Quite opportune given the current events!](userimages/customs/29500/29107-1.jpg) Lara Croft (British Pride Union Jack T-Shirt) | ![[Custom Union Jack 3rd] Custom union jack III "joseph chapman" .
Joseph chapman is the third person to assume the union jack persona since world war I.
Recipe:
Base figure: x-men logan.
Head: ml union jack.
Mask, hair, headphone, bulletproof vest and gauntlets was sculpted with epoxy putty.
Hand painted.
Thanks for looking.](userimages/customs/29000/28556-1.jpg) Custom Union Jack 3rd Marvel Legendsby STANJOKERCustom union jack III "joseph chapman" .
Joseph chapman is the third person to assume the union jack persona since world war I.
Recipe:
Bas...15 comments |
![[Union Jack] #12. I used cyclops' body, silver surfer's head & some indiana jones arms. After putting them together I added wrist bands and pouches on his belt on the back, then painted still need to finish with clear lacquerto seal and prevent paint loss.](userimages/customs/24500/24055-1.jpg) Union Jack | ![[Union Jack] Used 2 be a pun, then grifter, now Brit-Kick@s$.](userimages/customs/20000/19722-1.jpg) Union Jack |
![[Union Jack] I pulled the head off of some movie Snake eyes and replaced it with a Storm Shadow and simple re-painted the figre. I have always liked Union Jack but the figure releases have been a bit poor. I realy like the legging, shoulder pads and knee pads on this figure. I also spend some time painting VERY small union Jack flags on the back of each glove.](userimages/customs/18500/18423-1.jpg) Union Jack G.I. Joe Resolute by johny7I pulled the head off of some movie Snake eyes and replaced it with a Storm Shadow and simple re-painted the figre. I have always liked Union Jack but...4 comments | ![[Union Jack & Spitfire] With the Avengers/Invaders bringing attention to the Invaders again, I just had to due this British brother & sister duo. Had fun with this one.](userimages/customs/17000/16721-1.jpg) Union Jack & Spitfire Invadersby CapSoldierWith the Avengers/Invaders bringing attention to the Invaders again, I just had to due this British brother & sister duo. Had fun with this one....3 comments |
![[Union Jack] This came about the same was as the red guardian. the new Union Jack is more ... well just look
Head- you can't see his face but I wanted personalty so I used Vulture's it really work's
Body- a.o.a Logan
Boots- Judge Dredd they shorted him to the right height and gave him holsters
Green stuff
let me know what you think (and I hope to see some copy cats)
thanks](userimages/customs/16000/15702-1.jpg) Union Jack Marvel Legendsby somethinggeekyThis came about the same was as the red guardian. the new Union Jack is more ... well just look
Head- you can't see his face but I wanted personalty s...1 comments | ![[Union Jack] There have been many men to uphold the mantle of the Union Jack. The first was James Falsworth in WWI. His son Brian carried on the tradition in WWII. The modern-day Union Jack, Joe Chapman, is a friend of the family. Brian's nephew, Kenneth, was supposed to take the costume, but ultimately ended up as part of another Falsworth family legacy, Baron Blood.
The base figure for Union Jack was ML Angel. The head is from Taskmaster, and is the pistol and belt. The knife is one of Elektra's swords, cut to size. The knife sheath and pistol holder are handmade from plastic and rubber, as are the bracelets and anklets.
Note* This figure was completed years before the release of the Hasbro ML. I was really looking forward to collecting this figure. When I did get it...well, let's just say I'm glad I made my own! Photos by Nara.](userimages/customs/15500/15223-1.jpg) Union Jack Marvel Legendsby tommyxThere have been many men to uphold the mantle of the Union Jack. The first was James Falsworth in WWI. His son Brian carried on the tradition in WWII....4 comments |
![[Union Jack] Union Jack's uniform base I did in black as most of the images of him appear mostly black with blue lighting high lights. Most probabbly is a dark Midnight Blue if you want to get technical. I also filled all the joints in with a putty filler. I re-painted his eyes, & detailed the Silver Dirk, Webbly (also glued flame at the end of the pistol),streaked the leather pouches & holster for accents.](userimages/customs/15000/14908-1.jpg) Union Jack Marvel Legendsby CapSoldierUnion Jack's uniform base I did in black as most of the images of him appear mostly black with blue lighting high lights. Most probabbly is a dark Mid...8 comments | ![[Union Jack] When I bought this guy I didn't know he had two right legs, so just a few days ago I started to take him apart. I used Astonishing Cyclops's legs (that fit in almost perfectly) and repainted him. I also took a varient bullseye's belt and leg strap, repainted them and added them on to my figure.
Please leave a comment to let me know what you think about it.
-Ty](userimages/customs/13500/13399-1.jpg) Union Jack Marvel Legendsby TysimplecustomsWhen I bought this guy I didn't know he had two right legs, so just a few days ago I started to take him apart. I used Astonishing Cyclops's legs (tha...1 comments |
![[Union Jack] Just a repaint here, blue base coat and a little light blue drybrush.
Gun from dollar store toy
Let me know what u think. Thanks, Cerebus](userimages/customs/13500/13392-1.jpg) Union Jack Marvel Legendsby cerebusJust a repaint here, blue base coat and a little light blue drybrush.
Gun from dollar store toy
Let me know what u think. Thanks, Cerebus...2 comments | ![[Bowen Style Union Jack] Ronin head repainted. Taskmaster belt with a bit of Nick Fury and other bits and bobs. Carved up WW2 Tommy Gun for his revolver. Tricky paint job by a decent result. Working on WW1 Union Jack so any comments/ advice would be great.](userimages/customs/11500/11199-1.jpg) Bowen Style Union Jack Marvel Legendsby templarRonin head repainted. Taskmaster belt with a bit of Nick Fury and other bits and bobs. Carved up WW2 Tommy Gun for his revolver. Tricky paint job by a...2 comments |
![[Union Jack] There were several things I wanted to do with this figure, so I don't know why I chose Union Jack. I think I had this figure sitting around for so long that I just wanted to knock him out with something quick. He's really basic, a little apoxie, a removed leg holster and ankle holsters. The red straps are leather glued with idb. The revolver is really cool but it was bought, not made by me. I had a cooler picture of this guy but I must have misfiled it. There are a few of my posted figures that I need to go back and update. I'll take care of all that one day soon.](userimages/customs/11000/10549-1.jpg) Union Jack Marvel Iconby pinkspacedogThere were several things I wanted to do with this figure, so I don't know why I chose Union Jack. I think I had this figure sitting around for so lon...0 comments | ![[Union Jack] And now... London Calling!
Another Red Hulk Wave Fix Up Job -
<b>Union Jack</b>
I feel like I've come full circle with this Custom. When I first started collecting MLs a couple years ago I came across one of DarthLeon's Union Jack Customs on a website and thought it was the cat's meow. It was the thing that really lit my spark for customizing. I tried to make one about a year ago and it was an abysmal failure. But now Hasbro has offered me a chance to make the Union Jack I wanted!
Recipe:
ML Moon Knight Head, Legs & Boots
HML RH Wave Union Jack Body
DCUC Black Manta Arms
Wristbands sculpted from Fixit
Replaced the Pistol and Holster with one from the FO Punisher
Replaced Knife and Sheath with one from FO Jigsaw
When I found the RH Wave UJ I almost passed on him but then I went back and looked at him a little longer and the customizer side of my brain kicked in and made me go - I can work with this!
When I got home I dug out the Moon Knight legs and boots that I](userimages/customs/10500/10179-1.jpg) Union Jack Marvel Legendsby Buzzy_FretAnd now... London Calling!
Another Red Hulk Wave Fix Up Job -
<b>Union Jack</b>
I feel like I've come full circle with this Custom. W...5 comments |
![[Union Jack] Repainted a moon knight figure with some extra weapons.](userimages/customs/7500/7098-1.jpg) Union Jack | ![[Union Jack] A snake eyes body and a storm shadow head](userimages/customs/7500/7097-1.jpg) Union Jack |
![[Union Jack] D/O/B 11-3-07 This is my second(and final) attempt at Union Jack and my 2nd custom ever. I know it's not comic book accurate, but their were elements of the Deathlok figure that I liked better for the Union Jack costume. I sculpted over the head and sculpted a knife sheath and glued it to his belt and then a total re-paint. The weapons were from a dollar store pirates figures that I re-painted. Let me know what you think.](userimages/customs/5000/4658-1.jpg) Union Jack Invadersby Bamf67D/O/B 11-3-07 This is my second(and final) attempt at Union Jack and my 2nd custom ever. I know it's not comic book accurate, but their were element...2 comments | ![[Union Jack] This is my first custom that I've done. I used a Spiderman figure from the first movie. Mostly, I cut and sanded most of the webs off. ( Boy, was that a pain !) Then I had to do a little sculpting on the chest to get rid of the big spider emblem and then I painted it. I'm pretty happy with the way it turned out except I wish I would have used a bulkier figure, but the
Spiderman figure was on sale for $1.50. I just did it to see if I was any good at it, and it didn't cost me much.](userimages/customs/4500/4404-1.jpg) Union Jack Invadersby Bamf67This is my first custom that I've done. I used a Spiderman figure from the first movie. Mostly, I cut and sanded most of the webs off. ( Boy, was th...2 comments |
|