This was a fun little project. I got this fish bowl at Walmart, but any round plastic fish bowl will do. I spray painted the entire bowl white. I painted the green trim at the top, and the eyes and...[See More]

Anybody remember that electronic Batmobile bootleg from way back in the early 1990s!? It was aptly called Super Bat Car. A battery powered knockoff of the Burton / Keaton original that had light up...[See More]

I originally used a Red 3 X-wing (first release, white bands on engines). I used paint thinner on a Q-tip to take off all the red markings. After I put some dish-washing soap on an extra toothbrush...[See More]

I converted an extra Gold 4 Y-wing to Gold Leader’s. I dremeled out the astromech socket and repainted the cockpit and bands on the engines. It always baffled me as to why we got a Gold 4 Y-wing who...[See More]

This one was a bit tough to do. All I did was spray it black, then went back and painted in the white areas, using tape to get the lines straight. I haven't decided yet on the figures for this...[See More]

I know this isn't 100% accurate, but I do like how it looks. I used tape to get the lines straight for the orange box. I used a sand-like color to paint the base, and dry brush some color on the...[See More]

To go with my Action Fleet Falcon from TFA, I customized an Action Fleet TIE Fighter to a First Order TIE Fighter. I simply spray painted the ship black, then went back and repainted the panels gray....[See More]

I am a huge Action Fleet collector and wanted to make the Falcon from TFA. I took the Falcon made by Galoob, as the one from Hasbro was weathered too much and there was no missile projectile. I took...[See More]

This was just a simple repaint. In A New Hope, the TIE Fighters were more of a gray color while in Empire and Jedi they were more blue. This repaint is to reflect how the TIE Fighters looked in A New...[See More]

This vehicle was fun to do. I spray painted the entire ship red, repainted the panels black and lastly added in the white and gray details. I based this off the titanium ship by Hasbro, which was...[See More]

Creado en tecnica scratch desde cero con partes plasticas varias, el cuerpo es de un plastico de los huevos de pascua Kinder y las patas son maquinas de afeitar. Escala aproximada 1/35 para exhibir...[See More]

Hey guys, this is my new original custom work. It is a model of motorcycle that I designed long time ago. Life's been busy these days but could'nt let my hobby go off. The last custom that I had...[See More]

1 Hasbro legacy collection Falcon, countless paints across countless paint sets, 10 years of my life. Here we are....[See More]

Started with a small plastic Easter Egg, I cut half of the long part off to create the opening. Glue egg back together. Cut & glued a thin strip of craft foam onto the lip. Cut & glued 3 small...[See More]

Took completely apart. Flat back. Then outside Satin black with some gunmetal. Trims are flat black with aged looked. Created a cage in the back. Its holding Slash. On slash I used a 90's version of...[See More]

This is my first proper airbrushed custom figure, I did spray some in the past, but it's not the same. I am still getting the hang of it, more difficult than what I thought, this or I didn't purchase...[See More]

Here is something that I've been wanting to do for a while. I've had this old DC Direct Lobo bike for years, but I never displayed it because it was ridiculously short. Now that I have the DC...[See More]

Originally a HM Armed Forces Scorpion90 tank. Redid the Drivers Hull and new smaller Drivers hatch. Total scratch built top of the Turret. All hatches are working. Also redone the cannon to be...[See More]

My third and probably last Tie vessel. This scratch-built Tie Bomber dimensions are 19 x 41 x 35 cm (cca 7,6´x 16,4´x 14´). It is in scale with my previous Tie Fighter and Tie Advance X1. It took...[See More]

My THIRD McFarlaneReach HALO Warthog stripped down and remodelled for 1/12 scale purposes. Once stripped down and removed interior. I added 1/10th scale Bucket seats. This one with Red Leather...[See More]

Originally an RC vehicle. Stripped down. Made an extended Underside that gave me sides (for storage bins) to the buggy. These Storage bins I added Three rods either side. Then metal mesh was cut to...[See More]

A Tamiya RC 1/12 M1025 MMWV HUMMER/HUMVEE base vehicle. Removed the doors. I may add working doors at a later date. Complete Scratch built Interior. Has gunners stand, Radio Comms Table and four...[See More]

Scratch built from various parts. Fans are from Soldier force. To hold the rotor blades that is by Rare Earth Magnets. Holds them tightly in place, allowing the rotation feature and when in storage...[See More]

A few weeks ago my niece gave me one of her happy meal toys, which happened to be the pixie's motorcycle from Onward, and I noticed it was a good size for my little avatar figure to ride on. I gave...[See More]

Making this project taught me one thing...USING A GOLD PAINT ACRYLIC IN HAND BRUSHING IS PAIN IN THE @$$😅🤣👍...[See More]

I am in Star Wars fever, and so, reviewing my Star Wars customs I noticed I never posted this. I did this a long time ago, using a vintage AT AT in bad shape, and transforming it into an AT-AT for a...[See More]

If you need to get a package from Bakura City to the Wildlands as soon as possible, then you call Gobaht over at Rocket Delivery and he will get it done. She may not look pretty, but that speeder of...[See More]

use a van took it part spray painted it black made some holes to run the led lights through cut the back doors and put some hinges magnetic gun rack and a rechargeable battery...[See More]

This is my most extensive project yet. This piece is fully 3D printed on resin printer Anycubic Photon S. I made model myself, basing on amazing design made by team working on Halo: Project...[See More]

It’s a hard life out in the wilds of the Dune Sea, but for a being with a keen eye and a quick speeder there’s money to be made. Clovit had been piloting his skiff in those barren wastes for 12...[See More]