What is the best paint for joints?

No problem! But I think if you've got a really tight joint that is rubbing hard the only way to defeat it it to alter it with some sanding.

Vallejo paints eh?

I will have to try that out.

Thanks!!!

(it just happens I get a discount on that paint )

You can also sand the area that is rubbing the paint until it doesn't touch anymore.

Kyle R. says that Vallejo Paints hold up pretty good in the joint areas.

I like to use a permanent marker on the joint first then paint over it in the matching color. This way if the paint comes off you still have a similar color covering the area.

Well really there isnt any paint that fixes this, it happens very frequently. There are several methods you could do to help the paint though:

1. LIGHTLY coat the joint with superglue, let it dry and them pait over. You'll lose some paint but not as bad.

2. Either water down a drop of paint or your brush and go over the area until you are satisfied, just keep it diluted to a certain point. It won't go on as dark as it normally would but it works pretty well