Super Sculpey Opinion
Other Forums: Action Figure Chatter, Figure Realm Comments and Questions, Identify Help, Off Topic, Trading Post

Super Sculpey Opinion

Posted in Custom Workstation

I am sculpting onto a head which I already had to redrill the peg hole.
I am using SS cause I am doing a trememous amount of small detail work here. Now, what is your opinions, do I remove the head and bake it separate( the negative being that the head might melt and I will lose any face detail on the non sculpted) OR Boil the head ( with the chanc eof it not curing properly and crumbling).
So far I am leaning towards baking the head.

Posted by TPCustomStudio
on Tuesday, November 20, 2007
User Comments
TPCustomStudio -
Wednesday, November 21, 2007
I boiled, didn't cure properly so I baked it.

came out fine. Sanded and placed back on the figure. I use SS sparingly but I shall bake it from now on.
LWes -
Wednesday, November 21, 2007
When I used Sculpey I always baked it and only times I had a problem was with pieces of hard plastic. Heads are very soft.
I don't know, I've never boiled a head so I have nothing to compare to.
MrBlu -
Tuesday, November 20, 2007
I myself use super sculptey,I would go with boiling the head I jus suggest you boil it alittle longer that you usaully would jus to make sure it cures completely
Henchmen4Hire -
Tuesday, November 20, 2007
Depends on whose figure it's going to be, if you're keeping it and know you won't abuse it then boil it, for a customer you should definitely bake it. The thing is that you have to use a lower heat setting on the oven so the fig doesn't melt and keep it in there longer.
Write a new Comment
New Comment...
                                                                  Pictures & Links


Superman on eBay