When I did the 3-3/4" rope bridge dio I wanted to make a 12 inch Rope bridge dio just with Indy and after a finally completing a few other Indy diorama's decided to give it ago. I picked myself up another Sideshow Indy and got straight into making the dio and was more then happy with the end result.
I used Vallejo and GW paints on the figure and diorama and then used pastels to weather the diorama and Indy figure. I have to thank a friend of mine called MFisher over on Sideshow Freaks forums for putting me onto the pastels. These are without adoubt the best things to use when weathering models, scenery etc.
1: Indiana Jones - Everything is from The Sideshow Toys Indy figure except the right arm which is from another figure and the shoes which are from Hasbro's 12 inch Indiana Jones figure. I removed the right sleeve and the small bead like buttons and replaced them using buttons from a Dragon WW2 American shirt.
2: Base - The cliff face I picked up from the local pet shop it's a foam back drop used in fish tanks, Once I got it home I cut out the desired length and height and used balsa wood as a frame and also for strength. Once the frame work was done I then used plaster of paris to cover the existing foam detailing to get the sand stone effect.
The rope bridge is a combination of balsa wood which was used for the blanks and a mixture of different sizes of rope which I got from the local hardware shop. The arrows were made using plasti rod and paper and once all the parts were connected and glued inplace I used Vallejo, GW paints and Pastels to paint and weather the entire diorama.
|Batman (grizzled)||Submission Order||Moloch, The Rusty Tin Can|
|Indiana Jones The Last Crusade||Indiana Jones Series||Face of Death|
|M.A.R.U (Mobile Amoured Recon Units)||Created by Hemble||Imperial Recon Patrol|