I recently started working on A light up mini cortana figure and terminal but was not happy with the over all project so I went back and added to it. I made a larger base for the chief to stand as kind of a diorama piece. the entire project was made out of various different fodder pieces i had lying around but the reciepe is as follows.
1. Action clix cortana
2. mcfarlane cortana light base pieces
3. various pieces from a gears of war one shot rifle.
4. drill bit case
5. drill bit lid
7. super sculpy
8. small air tubing
9. mcfarlane halo avator case
the entire base is cardboard with the trim made out of super sculpy. I dry bushed it and used a grated box i had to spray through to give the base a grated metal look. I then constructed the railing out of small air hose i got from my job, close hangers and tumb tacks. I assembled it and painted adding it to the base. for cortanas terminal, I used a drill bit case which i ran the wires and lights through and the battery pack sits under neath the base. I the used a scrap plastic dome i got from my job and added various fodder pieces to make it look like a futuristic computer stand. I panted the entire thing with chaos black spray but taped off the part of the base o would attach cortana so the light would shine through. I then dry brushed the terminal and glued on cortana, the switch to turn on the light is built into the side of the base and there you have her. I hope you like this version and thank you for looking.
|Scrap Iron||Submission Order||Goliath(Classic V.2)|
|Master Chief||Halo Series||Emile ( Halo 4 Style)|
|Cortana||Created by pyramidhead22||Emile ( Halo 4 Style)|