![]() | Hello Guest - Sign In or New Account |
Latest Events Marge & Maggie Review - Added by RMaster007 Monday, March 24, 2025 ![]() The MVP of this wave is Marge, completing the core family. We already got her in the 2.5" line, so making that sculpt twice as big presumably wasn't too hard, and she turned out the best of the main five in my opinion. Although she has the same blank happy stare as the others, the face looks great, and the eyelashes and pupils are clean and centered. Her hair is oddly sculpted as two parts, and you can see the seam line halfway through it. I'm not sure why they had to do it like that, but the big beehive hairdo is just as lumpy as it should be. Marge's hair makes her taller than the others at 5 3/4", but she's in good scale with the other adults. The upper part of the dress is sculpted onto the body, but the lower part is a separate piece of softer plastic over the legs. It's better than making the lower body a solid piece, similar to some of their Mario figures like Peach and Daisy, and there are slits on the sides to give the legs more range. Marge has all the usual joints, including a swivel neck, swivel/hinge shoulders and wrists, hinged elbows and knees, ball-jointed hips and ankles, and swivel waist and biceps (actually a bit below the biceps). Even with how the dress is handled, the legs can't do too much unfortunately, and they should've made the overlay rubber instead. Marge doesn't come with any accessories, but rather another character, and as anyone could've guessed, it's Maggie. Standing 2" tall, she's in better scale with the adults than the kids are, and the sculpt is spot-on. It's a little obvious Jakks just scaled up the Maggie sculpt from the 2.5" line, judging by the similar hand positions and walking pose. There are a few tiny paint marks here and there, but they aren't too noticeable. She's quite posable as well, with a swivel neck, swivel/hinge shoulders, and a ball waist, allowing for plenty of expressive poses. It would've been nice if we got something else with this pair, but they'll at least look great together and with the rest of the family. Homer's also in this wave, and thankfully not a reissue like the previous wave. This version gives him his softball uniform (incorrectly marketed as a baseball uniform) from "Homer at the Bat," no doubt a classic episode of the show. The outfit's been recreated near-perfectly, with clean paint on the sleeves and belt (though the belt loops could've been better), cleats, his name neatly printed on the chest, and a removable cap. They forgot to include the Nuclear Power Plant's mascot, Smilin' Joe Fission, on his cap, but that aside the outfit looks great. I imagine the temptation to reuse tooling from the standard Homer was strong, but everything here is a new sculpt, including the head. The likeness is a lot better, with a better scalp and mouth, and the hairs are shorter so the cap can fit on. The neck looks a little taller than it should be, but the sculpt is fine otherwise. Homer has nearly all the standard joints as well, including a ball waist, but it doesn't have as much range as I would've liked. The ankles only swivel, and I imagine the sculpt was a little restrictive on how they could move. Ball joints would've been a lot better for this specific look. Homer's main accessory, aside from his cap, is his "Wonderbat" from the same episode. The paint and detailing look great, and the lightning bolt is sculpted in to make it look engraved. The arms don't have enough range for a two-handed bat pose, but the box shows you can sort of cheat it, and nevertheless, he'll pose well with it. Filling out the kid quota for the wave is Milhouse, Bart's best buddy. Alongside Marge and Maggie, he's the best sculpt of the wave, especially the head. They managed to capture the hair well, and the glasses look good too, though they aren't removable like with the Playmates Milhouse. It makes for a more seamless sculpt, but being able to take them off would've added some fun. At 3 1/2", the usual height for kids in this line, I was half-expecting some tooling for Bart to be reused, given the similar torsos, but it's all unique to Milhouse. The articulation blends in well with the sculpt, and he's the only one in the wave to have all the usual joints, but the torso prevents the arms from being able to hang down naturally. Milhouse has one of the more intricate accessories in this line with a bicycle. The bike looks great, with clean paint, including metallic areas, and all the proper parts. The wheels can spin, so you can push it along like one of those Tech Deck bikes, but everything else is solid. The pedals have foot pegs, ensuring Milhouse will stay on it, and the articulation on him is enough to ride it, but he can't sit down properly, even with the improved leg movement in this wave. There's also a clear stand the bike can plug onto, allowing it to stand up, and it's a good idea on Jakks' part. Speaking of best friends, rounding out the wave is one of Homer's pals and Moe's customers, Lenny Leonard. Lenny stands 5" tall, just like Homer, and his unique design has been recreated well, with the arms being quite long and legs being a little short. The hair is another two-piece, like Marge, but here I can see why they did it like that, due to the slightly more complex design. The paint on the suspender buckles and shoe soles is very clean, and the colors are accurate. Lenny doesn't get a waist joint like the others do, most likely as to not break up the look of the suspenders, but the rest of the joints, especially the legs, work great. His accessories are more generic, with just a coffee mug and a lunch bag, but they'll fit him well in certain displays, including the Playmates Power Planet lunch room if you have it. Jakks' Simpsons line gets better with each wave, and the lineup here is great. We get not only the remaining core family members and two B-listers, but a variant coming from a fan-favorite episode, and the fun accessories help. The articulation also feels a little better here, but there are still some steps back with it. Some upcoming figures in this scale got leaked recently through international Amazon sites, including some of my more desired characters like Mr. Burns and Grampa, and more unexpected choices like Troy McClure and "Stupid Sexy Flanders." I'm looking forward to them, as well as whatever else Jakks has planned. - 3/24/25...[See More] Th3BigFish Public Profile - Updated by Th3BigFish Wednesday, March 19, 2025 ![]() Current Projects: Playmates TMNT Irwin and AB Toys Dragon Ball Z Kenner Batman The Animated Series Tomy Takara Pokemon Honorable Mentions: Some Toy Biz from Marvel ...[See More] Zee Public Profile - Updated by Zee Wednesday, March 19, 2025 ![]() ...[See More] Amaru Public Profile - Updated by Amaru Wednesday, March 19, 2025 ![]() Currently Collecting: Spawn figures Want List: I want it all, and I want it now!! hahaahah ...[See More] Chilla Review - Added by RMaster007 Wednesday, March 19, 2025 ![]() The Lunataks had some pretty funky designs, and Chilla is the most humanoid of them, but she shared some of the same design aspects as the others, such as the horns, the nose, and the crescent symbol on her forehead, er, hair. The hair, and by extension the horns, are soft plastic, as to reduce fears of breaking the horns. The likeness is accurate to the show, save for the hair having more detail, and she bears her default stern expression. The alternate head is much more displeased, with red eyes, mouth wide open, and hair flowing back. The mouth is sculpted with some depth, and there's a reason for that that I'll go over in a bit. The paint is very clean on the heads, and these figures certainly look nicer now that Super7's trying more to make them look less glossy. Chilla stands 6 1/4", and befitting her powers, she has an icy color scheme, utilizing light purple and a few different blues. The paint lines on the body are very clean, save for a small speck above the right boot. The body sculpt itself is good too, with proper proportions and great blending with the articulation. The lower part of the dress isn't soft plastic, but it doesn't get in the way of leg movement thankfully. The icicle-like bits on the gloves are also tough plastic, so take some care when handling the arms not to jab yourself. Since Super7 likes tailoring, Chilla's cape is fabric, with an integrated wire, so that it can be posed dynamically. Holding the cape in place is a collar glued into the back, and it's made of soft plastic to keep it from restricting the shoulders. Chilla has the standard movement, with a barbell head, swivel/hinge shoulders, elbows, wrists, hips, knees, and ankles, ball-jointed (maybe barbell) chest, and swivel waist and thighs. Most of the joints move with no issue, but the leg joints were really stiff out of the box, and needed heat to get moving. They move fine now, but the thighs aren't all that great. The chest has some decent range, but I would've liked a little more tilt to it, and I'm not sure if the waist is a ball or just a slightly loose swivel, but some tilt there would've been good. On the positive side, the heads and hands swapped easily, with no need for heat. The accessories for Chilla are pretty good, and most of them come from specific episodes whose names I can't remember. I already mentioned the extra head, and coming with it is an ice breath effect that plugs into the mouth with no issue. It's a little smaller than I would've liked, but it looks great. She also has sets of closed, gripping, and grasping hands, as well as a pointing right. Chilla has not just ice powers, but heat powers as well, made evident by the heat laser beam that plugs into the pointing hand. Going back to the ice powers, she has an icy grenade and a ice collar that can be placed around another figure's neck, but the latter can't be worn by Chilla herself. Less fantastical accessories include an antifreeze bottle, a spray can, and a handbag, and I know the last two come from "Sideswipe." If you pre-ordered the whole ninth wave from Super7 directly, you'd get a head pack with a smirking head for Chilla. That's something I really would've liked to get with the figure itself, rather than being locked behind a pre-order you have to pay upfront for. The Lunataks were some of the many characters who never got figures in the original LJN line, and Super7 has finally done them justice. Chilla is a well-made figure, aside from some quibbles with articulation, and with Alluro having been out for a while and Luna and Amok having just come out, I'm holding out now for the remaining two Lunataks. It looks like there's nothing new going up for pre-order yet, so it's a good time to get the previous releases in this line. - 3/19/25...[See More] Krusty Burger Diorama Review - Added by RMaster007 Tuesday, March 18, 2025 ![]() This diorama, like the earlier Simpsons' home, consists of a base and two walls, one long and one short. The roof is present on the longer wall, and the sign plugs into it. Said sign utilizes a sticker, as does the window, with silhouettes of Chief Wiggum and Lou inside (could we be getting a 2.5" Lou at some point?). The other side gives us both a door and a drive-thru window, with the generic teen inside. The walls have little cracks on them, with a missing chunk of paint revealing the bricks underneath (both are the same color, I guess Jakks didn't bother with more paint). The drive-thru window opens up, meaning you can have someone stand inside and hand customers their food, and it's a good idea now that we know vehicles are coming to the line. Speaking of stuff that moves, the drive-thru menu sign has a tab that you can pull to change the menu. The alternate menu has much less healthy food, and it feels like something episode-specific. Krusty Burger scales about 9 3/4" long, 6 1/2" tall (not counting the sign), and another 6 1/2" wide. The size is similar to the Simpsons' home, but it feels more spacious, possibly because unlike the other set, there are no moving stands on the floor. There's a counter with a cash register right by the window, and the appearance is a bit on the simple side, but it fits the show's style, and the sticker is a nice touch. Adjacent to the counter is a table with booth chairs, and there's enough room there to fit the whole Simpsons family if you got the multipack. The table and counter plug in firmly to the base, but the chairs aren't as tight a fit, and are more likely to pop out. The back wall is one big sticker, providing a view of the kitchen with two cooks happy to fulfill any order, a menu with surprisingly low prices, and two episode-specific elements: a poster for the "Mother Nature Burger" from "Coming to Homerica," and a clear spot with a bird smooshed up against it, a gag from "King-Size Homer." As an extra incentive for people to buy the set, it comes with a Krusty figure, but not the same one from the 2.5" singles. This Krusty is in his outfit from the Mother Nature Burger commercial, itself coming from the aforementioned "Coming to Homerica." The head is the same as the basic Krusty, but the clothes consist of a farmer-like shirt and overalls. The checkered lines on the shirt are sculpted in, which is a bit easier than painting them, and the paint on the arms and overalls is very clean. The television clown/fast-food franchiser stands about 3" tall, and like the rest of the figures in this scale, has a swivel neck, swivel/hinge shoulders, and a "sit-down" joint for the lower body. The set also comes with two accessories. One of them is a tray of small burgers, enough to feed a group of people (or one Homer). The burger pile is just a one-color piece, and I imagine it'd be hard to paint it cleanly, but the sculpt on it looks great. The other accessory is a deep-fried bag, a gag coming from "Diatribe of a Mad Housewife," and it's the kind of ridiculous, unhealthy thing only a fictional restaurant would do. This ties into another play feature, as the bag can be placed onto a spot on the counter, and then you push down on the register to flip it out the window. You'll have to open the window yourself for the feature to truly work, but it's pretty fun. The Simpsons' house diorama was pretty good, and Krusty Burger is just as well-made and creative, but it's my favorite out of the two. It feels like it'll make sense with more figures, and there's enough space for plenty of characters, topped off with episodic references to appease dedicated fans. I'll be making sure to grab more of the 2.5" line, though I may have to do it online since I'm having no luck at brick-and-mortar stores, and I'm hoping to see more dioramas this year. - 3/18/25...[See More] HeroesInAction Public Profile - Updated by HeroesInAction Monday, March 17, 2025 ![]() Favorite Figure: DC Direct Superman 2003 Favorite Series: Kenner Super Powers First Figure: Mego Superman 1974 Collection Size: 1000s of Toys and Comics Currently Collecting: McFarlane Super Powers ...[See More] ROBERTMULERO1956 Public Profile - Updated by ROBERTMULERO1956 Saturday, March 15, 2025 ![]() Current Projects: I AM A TOY COLLECTOR Honorable Mentions: NONE Comments: NONE Favorite Figure: MARX TOYS Favorite Series: DISNEYKINS First Figure: G I JOE Collection Size: A LOT Currently Collecting: DISNEYKINS Want List: DISNEYKINS ...[See More] Looking to commission a articulated, poseable custom figure! Topic - Added by Xerato Saturday, March 15, 2025 ![]() Have a great day if you're reading this! Again very sorry if this is against the rules of the website but I'm desperate and figured this would be a good place to go....[See More] ![]() Dragon28 - Sunday, March 16, 2025 Hey, there! As I'm also trying to do custom work making the action league now post prior. I'd say to help you out if you wanted to try and make it is using a Figma Jojo (Dio) figure that has posing possibilities! It gives you the shoes close to how they look. and with a little modding to help you out PrimevalFreak Public Profile - Updated by PrimevalFreak Friday, March 14, 2025 ![]() The Cleaner Professor Nick Cutter (Series 3) James Lester (Series 3) Favorite Figure: Primeval Raptor Favorite Series: Primeval Collection Size: Very big ...[See More] Action League now! Thunder girl parts Topic - Added by Dragon28 Thursday, March 13, 2025 ![]() All I saw from the Wiki it says a Sidney doll head and a modded She ra figure! But I'm not so sure about the she ra body? A lot of my researching so far, i can say that most of the figures all came from Hasbro roughly around 1990 and 1994! I've just been in recent contact with the creator of "Kablam!" after talking to the artist, and he's going to provided me with pictures of the figures he still might have soon. Also Bob was kind to try and reach out for me to the creators of Action League now. So Any updates I'll let you all know! But I'm looking for anyone's who's willing to help me find more clues or might know details to the parts? I'm trying to find the everything that might have used: Torso, arms that have the elbow joints, and epically the legs of the figure!! That have a certain Boot design. I was almost for sure that it might have been a wrestle figure but haven't found anything still. https://www.google.com/search?q=action+ ... aic&ref=me https://www.google.com/search?q=action+ ... sid=mosaic...[See More] |