SOS! Maestro Hulk torso fix

SOS! Maestro Hulk torso fix
Posted in
Custom Workstationlike others I was using the maestro hulk as a base figure for my juggernaut. But..there was something rattling around in the chest cavity. So I was able to unscrew the top half off of the lower torso.
But now I can’t get it to go back together. There is a screw, a couple washers, and a spring inside it. And I don't know exactly how it all fits together inside. I pried one of the arms up and can get inside of the chest cavity but can't figure out how to fix it.
I may have to glue the top half with the bottom half.. and then it won't turn at the waist.. But before I do that.. are there any suggestions on how to fix this?

Please wait...
User Comments
Robots on eBay
I have pictures and I'll try to be brief.. but I am not known for brevity LOL.
You may enter you own nuts and bolts and lower torso jokes at anytime.
I used one nut, one bolt, and the super epoxy that cures in like 5 minutes.
First thing I did was take the stick out of the lower torso..I stuffed some epoxy in the hole and then put a nut in the center.
As that was curing, I placed the bolt and washer inside the chest cavity pointing down through the hole in the bottom. I added a little epoxy around the washer to hold that in place. Let that cure.
Then I put the screw driver in the neck hole and placed it on the bolt so it wouldn't come out of the washer as I put the upper torso on to the lower torso.
I began tightening the bolt into the nut in the lower torso and TAA DAA.. We have a fix and the upper torso still turns.