Hi need help fixing a broken arm...please

you still here bud?

a rod from the arm? you mean the PEG that sticks out of the shoulder ball joint? or is their a peg going THOUGHT the center of the shoulder ball joint?
soon enough, I forget what number of posts you have to hit but you'll get their soon enough!

Is a little like that but the problem is not in the torso.
Is in the arm.

The torso has a broken piece but is easy to fix.
I just have to remove a rod in the arm.
But I can't is too damn hard.

If I could just post one picture this will be much easy. ....

Thanks for trying to help.

is the damage anything like this? with the peg stuck in the socket joint? I think thats what you were saying? holla' back.


http://t1.gstatic.com/images?q=tbn:ANd9 ... OF06XKTL4w

stick around...after you post enough and they know your not a flamer a troll or a bot you will be permited. I'll look it up in the next few houres. I'm painting a cable arm so I will have some time in between coats. and thanks for the series id!

Hey countpichula,

No the torso is fine. The figure is a Crimson Viper from NECA Street Figter 4

I just that the part that connects the shoulder in the torso is broken is like these: Head
o-- Torso --o <- these one broke and is like these now --c the rod goes inside the "o"
and the piece missing is inside the shoulder behind the rod....

I don't know if it really explain the problem
I would be easy post the images or links but the admin won't let me ....

Thanks for the help bye the way

Now did you crack the torso? It could be gears ,then no amount of heating and popping will work. I highly recommend a dremmel, or small bit drill. Then a nail hole puncher. Or small pick. Drill below the arms and I also always drill on top of the shoulders or on the neck ( but in a downward direction) makes stress more evenly distributed.
I'll look around, I've never worked with a viper gig. What line? As I k kw their were one ortwo different lines? I'll see if I can find an image of the insides. I'm working on making a list with pics of the insides of figs so one can quick reference for often used figs.

Thanks for the quick answer!

Great forum

Before I made the topic I checked all the tutorials but none help me dissemble
this figure.

The rods are really hard to remove. Right now thats is my only problem.

The rod in the shoulder. I can't post images unfortunately so I will try to heat the shoulder in hot water
and try to remove it again.

Thanks again.

It's ok. I post on Japanese sites and I suck worse then you.
I'm not gonna talk it out cause I'm to wordy and afraid I will lose you.
Go here:
http://www.figurerealm.com/viewcustomtu ... view&id=34

And here:
http://www.figurerealm.com/viewcustomtu ... view&id=45

Hope they help! If you post pics I can try and help more spasificly since I deal wiht this a lot

Also, your English isn't that bad :]