This was a commission for a mezco style Red X. Did a good bit of experimenting with resin and such to make the chest plate, a couple of the heads, the belt and various nuts and pieces. Unfortunately,...[See More]

Base was a mash up of marvel legends. Spidey Noir head and Deadpool boots. Best, shirt and pants from gpslot on eBay. Coat from another seller. Hat was from a neca Freddy, if memory serves. Thanks...[See More]

So, a friend commissioned me some time back to make Bat Metal for a Christmas present to his boss. I don't know how many of you are familiar with this iteration of Batman, but the heavy metal youtube...[See More]

This was a commission from the Philippines. My first from that far away. The client wanted to be sure he had plenty of articulation, so after some research, we agreed that soft foods would be the...[See More]

I can't recall exactly which one, but I used a UFC figure for the base. Good articulation and good scale with the cast head I got from eBay. Got the shirt and pants from gpslot on eBay and did some...[See More]

This was one I made a while back for a friend. Was going through pics on my phone and found them. Totally forgot about it. It was a Revolmini Black Hole with sculpted pants. Can't recall what the...[See More]

So this isn't so much a custom, just a mod, but I thought it may be of interest to others who may want to try the same or similar. I saw a post where someone had pried off Casey's mask to show quite...[See More]

So, I found this rectangular chunk of plastic and had a crazy urge to make a SpongeBob out of it. Not just any SpongeBob, mind you, but Musclebob Buffpants. So, I drilled out some eyeholes and a big...[See More]

Commission for an excellent client. One is a ML Jessica Jones base, jacket section from the diamond select Faith. the other is abs down Netflix Electra, upper torso Lady Deadpool, dremelled down with...[See More]

Torso was a Figma swimsuit male with sculpted shirt and waste armor, arms and legs were from a figma Bruce Lee with the lower legs heavily sculpted and wrist armor sculpt. Pauldron was made from a...[See More]

Gonna start getting a bit more bare bones with my write ups. I feel like I waste a lot of time being all meticulous like for my customs to just fly under the radar and into the archives, so, the...[See More]

The base was a Damtoys pocket elite 1/12 Drawman. Though a bit small, compared to marvel legends, I really like the articulation and the fact he could easily pull off the meditation pose. The pants...[See More]

The head was a cast I got from eBay with Mezco Blade sunglasses The pants and shirt came from gpslot on eBay. I sewed cargo pockets on the pants also. The pistols and holsters were from a Tomb...[See More]

Ello folks. Upper body was a figuarts Bruce Lee Lower body, figuarts Trunks Head was a bring arts Sora with sculpted hair Boots were figuarts Ace Sword was made from some sheet plastic with two...[See More]

Another Mezco one 12 style Snake Eyes. I got a Diabolik figure, and I couldn't help but take the opportunity to turn it into a Snake Eyes. I got the pants from gpslot on eBay, the various pouches,...[See More]

I got this awesome wired cape on eBay, so had to make a Spawn to use it. I attached a chunk of a ML cape with a peg to the inside of the cape, so it could be removable. I used Marvel Legends Black...[See More]

Whew! Finally made 100! I wanted to do something special for this one, so I decided to revisit my first post on the Realm. I love Kung Fury! It's just amazing 80s madness, so I was definitely psyched...[See More]

I've been wanting to make a Mezco style Snake Eyes for a while. I was very tempted by the custom kit on the One 12 shop, but it was a little more than I was willing to pay for just the accessories. I...[See More]

My best DC client wanted a concept Nightwing, revolmini style. It was a pretty plain muscular type body, so all the details are sculpted. The head was from the old fodder bin with sculpted mask and...[See More]

This was a commission for a new client. They wanted a 4 inch Ash with a lot of articulation. We discussed potential base figures and decided to go with boss fight. The shirt, harness, and lower pants...[See More]

Sorta Mish mash of marvel legends parts. Used a danger girl head. The cape came from a DC icons Superman and the symbol was from a cast I made from a DC multiverse Superman....[See More]

I've seen this recipe a few times, and it seems to work quite well. My only problem with the revoltech base was the arms couldn't go down to the sides too well and one arm was a little higher than...[See More]

Evil Dead 2 is one of my favorite horror movies. I was so psyched when Mezco released their Ash, but I was a little disappointed in the articulation, especially in the arms. I carefully stripped the...[See More]

This is a gift for my best friend and partner in Raynecustoms. She has been wanting me to make this one for quite some time, and I've started it a few times, and never felt good about the direction...[See More]

This was the commission that inspired me to make the Dexter Soy concept Red Hood. The client wanted a Red X mashup with the Soy concept. I used a marvel legends Spidey for the base. Sculpted the...[See More]

I saw the awesome Miles Morales that Spoon Dude posted some time back, and thought I'd give the recipe a shot. O had gotten a bootleg Mafex Spidey a while ago with the intent to use it for a custom,...[See More]

Got one of the older diamond select Buffy figures off eBay and though they weren't great, they had quite a good likeness. Started off with the Netflix Elektra. Did a face transplant and sculpted the...[See More]

I really like the Revolmini Klaus figure for the base, but it was was too bulky for Joker, so I dremelled, cut and sanded down the torso and arms a good bit. The heads were from a cast I made of the...[See More]

So, I had this old 4inch spawn half statue half action figure from the early 2000s, and I always wanted to articulate it. Decided to cut and Dremel and drill the armor, spikes, hands, head and all...[See More]

One does not simply make just one Red Hood. Been on a kick with Revolminis lately. This is mostly built on a Revolmini Zapp Renfro. Lower legs were from a cyborg ninja with some sculpt applied. Hands...[See More]