The wings were from a seller on Shapeways. I sprayed the wing attachment black, then painted it with a Fenrisian Gray. I also added in some gray details in the back. The cockpit was an extra I had...[See More]

This is a scratch-built Imperial Interdictor. It is made of plastic, cardboard and, as always, of things you can easily find at home (beads for the bridge deflector, caps from dishes-cleaner bottle...[See More]

While I'm aware this ship appeared in Dark Empire, I remember this from the last campaign level in the original Rogue Squadron. I purchased this off ebay, which was from Scale Solutions. It was...[See More]

This is the 181st TIE Interceptor, piloted by Soontir Fel from Legends. This was an easy custom. I simply used tape on both wings to get the red blood stripe straight. The Action Fleet Interceptor...[See More]

This is made from Cardboard, Styrene , Pen , BBQ Sticks and Toothpicks. Painted with Acrylic paint. It does'nt look accurate but tried my best to make it look good. I have already made a jeep once,...[See More]

The body is an X-wing with the wings being 3D printed from Shapeways. The Gunboats are a dark gray so I simply used Tamiya Gray Spray Paint. The wings already had a design on them after being...[See More]

A lot of going back and forth with this one, between cutting up pieces I needed, sizing them up, repeat if necessary. The 3 wings were wings from an X-wing, with the top wing being shortened. With...[See More]

The Black Series figure of The Child (Baby Yoda) didn't come with his crib, so I decided to try to make one from scratch, which was a lot harder than I thought it would be. Hopefully I can come...[See More]

Red Four John D. Branon's X-wing. I used a Luke X-wing and used paint thinner to take off 1 red stripe on each wing. I used tape to connect the red stripes on both sides of the ship. Then I added in...[See More]

Red Leader's X-wing with Red Leader and R5-K6. I always thought it was odd we didn't get this X-wing variant. I used the "Alpha Series" X-wing (Biggs) that had the white bands on the engines. I used...[See More]

This was a fun little project. I got this fish bowl at Walmart, but any round plastic fish bowl will do. I spray painted the entire bowl white. I painted the green trim at the top, and the eyes and...[See More]

Anybody remember that electronic Batmobile bootleg from way back in the early 1990s!? It was aptly called Super Bat Car. A battery powered knockoff of the Burton / Keaton original that had light up...[See More]

I originally used a Red 3 X-wing (first release, white bands on engines). I used paint thinner on a Q-tip to take off all the red markings. After I put some dish-washing soap on an extra toothbrush...[See More]

I converted an extra Gold 4 Y-wing to Gold Leader’s. I dremeled out the astromech socket and repainted the cockpit and bands on the engines. It always baffled me as to why we got a Gold 4 Y-wing who...[See More]

This one was a bit tough to do. All I did was spray it black, then went back and painted in the white areas, using tape to get the lines straight. I haven't decided yet on the figures for this...[See More]

I know this isn't 100% accurate, but I do like how it looks. I used tape to get the lines straight for the orange box. I used a sand-like color to paint the base, and dry brush some color on the...[See More]

To go with my Action Fleet Falcon from TFA, I customized an Action Fleet TIE Fighter to a First Order TIE Fighter. I simply spray painted the ship black, then went back and repainted the panels gray....[See More]

I am a huge Action Fleet collector and wanted to make the Falcon from TFA. I took the Falcon made by Galoob, as the one from Hasbro was weathered too much and there was no missile projectile. I took...[See More]

This was just a simple repaint. In A New Hope, the TIE Fighters were more of a gray color while in Empire and Jedi they were more blue. This repaint is to reflect how the TIE Fighters looked in A New...[See More]

This vehicle was fun to do. I spray painted the entire ship red, repainted the panels black and lastly added in the white and gray details. I based this off the titanium ship by Hasbro, which was...[See More]

Creado en tecnica scratch desde cero con partes plasticas varias, el cuerpo es de un plastico de los huevos de pascua Kinder y las patas son maquinas de afeitar. Escala aproximada 1/35 para exhibir...[See More]

Hey guys, this is my new original custom work. It is a model of motorcycle that I designed long time ago. Life's been busy these days but could'nt let my hobby go off. The last custom that I had...[See More]

1 Hasbro legacy collection Falcon, countless paints across countless paint sets, 10 years of my life. Here we are....[See More]

Started with a small plastic Easter Egg, I cut half of the long part off to create the opening. Glue egg back together. Cut & glued a thin strip of craft foam onto the lip. Cut & glued 3 small...[See More]

Took completely apart. Flat back. Then outside Satin black with some gunmetal. Trims are flat black with aged looked. Created a cage in the back. Its holding Slash. On slash I used a 90's version of...[See More]

This is my first proper airbrushed custom figure, I did spray some in the past, but it's not the same. I am still getting the hang of it, more difficult than what I thought, this or I didn't purchase...[See More]

Here is something that I've been wanting to do for a while. I've had this old DC Direct Lobo bike for years, but I never displayed it because it was ridiculously short. Now that I have the DC...[See More]

Originally a HM Armed Forces Scorpion90 tank. Redid the Drivers Hull and new smaller Drivers hatch. Total scratch built top of the Turret. All hatches are working. Also redone the cannon to be...[See More]

My third and probably last Tie vessel. This scratch-built Tie Bomber dimensions are 19 x 41 x 35 cm (cca 7,6´x 16,4´x 14´). It is in scale with my previous Tie Fighter and Tie Advance X1. It took...[See More]

My THIRD McFarlaneReach HALO Warthog stripped down and remodelled for 1/12 scale purposes. Once stripped down and removed interior. I added 1/10th scale Bucket seats. This one with Red Leather...[See More]