Main base is a Shop playset basic walls. TomyTech Armoury parts & some lockers found on HLJ. Lawgiver pistols from 3A, Mezco, ReAction lines. 3A bazooka. Scratch made Stub Gun. Helmets are Hasbro...[See More]

Hi All, This one is for a client he built the kit and wanted me to paint it up for him. He wanted it to the 501st and wanted a small and simple base to go along with it. Recipe Figure - is from...[See More]

Hi All, I figured that I would put the last three Shoretroopers I got for xmas onto bases so I made three so that they can connect together. I also decided to make them into ranks so I did a normal...[See More]

I recently picked up the neca aliens accessories pack and really loved the face hugger test tubes it came with. I instantly wanted to make a small diorama for my aliens display shelf. To create this...[See More]

Hi All, Just an easy one today, I got a 3-3/4" Deathtrooper for xmas and decided to do put him on a dio. Recipe Figure - Hasbro's 3-3/4" Black Series figure as usual I glued the joints and then...[See More]

Hi All, Here are the usual pics and last dio for the year and I want to wish everyone a Happy New Year and see you all in 2017. Recipe TB2 - is from Vivid and was given a sanding in area's that...[See More]

Hi All, Recipe. Troopers - are Hasbro's 3-3/4" Black Series and I super glued the joints and then puttied them up and once dry I used tissue paper to cover the cloth areas. Base - is four Bandai...[See More]

Hi All, Recipe Troopers - are from Hasbro and I super glued the joints and then puttied them and once dry I repainted the body suit and weathered the armour. Base - is balsa wood and then I used...[See More]

I hand sculpted every chicken, helmet, tomato, and the stand (except the cardboard part) from Apoxiesculpt. The mortar is just an old GI Joe accessory! Toejam and Earl Sega Genesis bad guys, known as...[See More]

Hi All, Picked up another Hover Tank driver and redid to be a Commander, I repainted him using Vallejo Paints and the insignia on the helmet is a decal from a 1/20th Ma.k kit. The base is a piece...[See More]

For this diorama, use for the high-density, 20mm-thick telgopor base, to which I covered with a hard plastic, applying it with a brush, to give it a limestone rock texture. For walls, use polyphane....[See More]

Terminator detolf shelf display piece for neca figures it has lights to make the barrel look flaming and also sound it plays the opening sequence from terminator 2 this was a commission piece you can...[See More]

Found a base piece that worked for Road/Carpark and then set about Pencil making the boarders and the test. Then Gundam paints did the text and then boarders....[See More]

After completing Max Force and Hitman from the video game NARC, I figured maybe I could try my hand at a custom play set. After considering my options I decided to start with the beginning: Level 1...[See More]

Hi All, I completed this small partial dio of the Hover Tanks cupola and repainted the Hasbro' BS 6" hover tank pilot to a commander. The cupola section was made up of foam board for the base then...[See More]

Coffin, plain pine, made from a blueprint found online. For my Western town. A real pain to make because of the angle cuts: I do no recommend. But finally finished. Now holds Billy the Kid, and...[See More]

Made from scratch cabin diorama built to fit inside a IKEA detolf shelf check out more of my work on Instagram @mrzombiesworkshop I'm always taking commissions...[See More]

Lego minifigures but of Danger Moth, Jeopardy Mouse, Professor Squawkencluck, Penfold & Danger Mouse. The heads are made from 2 Lego bricks, except for Penfold who is shorter so only one brick, The...[See More]

Toy Art Diorama Costum Made Dino - Riders Harness the Power of Dinosaurs Youngstar VS Krulos with Deinonychus and DRAGONFLY Battle Accesories reformed the figure of deinonychus build two Magma...[See More]

Here I used a taskmaster body , a whirl wind head and a Anya corazon hair piece sculpted on... Watch my few videos on YouTube (dot) com (slash) poundz978...[See More]

Hi all! I am still in the process of repainting all of my modern Star Wars collection and got around to this one. Wanted to make a little display here so it would seem more like one whole piece. The...[See More]

I made this Eddie figure "as the trooper" using several loose parts and a sculpted resin head. The clothes are from a British soldier souvenir....[See More]

Here is my post apocalyptic overpass diorama. I chose to use the 3.75" terminator figures as they work quite well with the 1/24 scale cars I used, but really you could use Minimates or Walking Dead,...[See More]

I have used various parts of several loose figures. The clothes are fom a British soldier souvenir commonly sold in London....[See More]

Another WIP. Here is the Castle Byers from Stranger Things. It's made using mostly twigs and dead fall. Home made pallet using popsicle sticks. Base is foam with real sand and dead fall debris....[See More]

Here is my WIP custom built Stranger Things livingroom setup for my custom made Demogorgon figure. This is I guess 1/12th-1/18th scale. Made using miniature Christmas lights from Michaels. Couch is...[See More]

BOOM!!! T.E.M gon' give it to ya!! For now he has arrived. The merc with a mouth and his gang! With great skills and maximum effort from Toy Elites Masterworks's team, now they finally here....[See More]

Hello guys!! This diorama is suited to battle the Terminators in the Apocalyptic Future!! Inspired by the Comic: Aliens vs. Predator vs. the Terminator. Thanks for view!!...[See More]

These are my custom webbings for Spider-Man figs. They are metal wires, woven together then prepped and painted. Some have web balls at the end for putting down the bad guys, and others are long...[See More]

I really love the imagery from Mad Max, so I wanted to make a custom that fused Pokémon and Mad Max. I used an old die cast Montgomery Wards car that I found at a thrift store, and I gave it a Mad...[See More]