This is another Balsa wood and gorilla glue creation. The 'Angel' gargoyle/statue is made from a titan series Electro and DCUC Hawkman wings. The stone faces are mini masks purchased at a local craft...[See More]

Hi All, Here is a Hasbro BS 6" Han/Tuantaun I customized. Tauntaun - I glued and filled in the joints and then I covered it with cotton wool and once dry I then made the blanket by cutting out a...[See More]

Hi All, I built this dio using Bandai's 1/48 AT-ST and some Tamiya 1/48 GI soldiers. The debri is plasti card and the base is high density foam with spakfill cover the stones and fine sand mixed in...[See More]

Hi All, The dio is based on the SW Battlefront game that I have been playing a lot of lately. Recipe. Figures - The Hoth trooper is a Hasbro BS 6" figure which I superglued the joints then used...[See More]

Hi All, Completed this dio last week using a Figma Indy. Indy was pulled apart and I then drilled thru his body/arm/leg so that I could put the wiring in for the torch. Once the wiring was in I...[See More]

The base dimension 13x6 "made of thick cardboard plate. The substrate made of plasticine, then I added a thicker layer and fashioned underwater dunes. The substrate pasted artificial aquarium...[See More]

Hey guys long time no see made a bat armoury for my batcave im almost done with hope you like any comments welcome...[See More]

I work with many materials and colors, I like to create new atmospheres and environments. You can follow my work on my studio with a Facebook profile "Monsters and brush studio"...[See More]

I've gotten many questions about my "Secret Sewer Lair" project, mostly of the 'Are you still working on it?' variety. Short awnser: yes! Longer awnser: Yes, but due to the amount of other, more...[See More]

Made a couple of "bat capes" for figures. Used broken umbrealla took the nylon ironed it, sketched on paper bat cape shape, used pencil to mark over nylon, cut out, sewed parts over to allow a bendy...[See More]

Insulation foam, random foam base, spackle, highlighter for the light post combined with a dollar tree light, random metal fodder for light post base, baby powder lid for manhole cover, acrylic...[See More]

The Walking Dead custom diorama, it was made to place the 5" figures from Mcfarlane. I used wood, foam board, aluminium, sand paper, pvc, wire mesh, brush, carton and paper. Shaolin Customs...[See More]

As my other Figure's have more Elaborate Display Stands, I decided Winter Soldier deserved an upgrade. The bottom base is a DC justice stand, the Back wall is the bottom Bases from 7" Iron Man...[See More]

Used some things micro arts studios makes and some spartan games stuff had to assemble and paint it all by hand no airbrushing...[See More]

Cut up plastic foam board and painted the details. This is my first Diorama so it's probably not to good....[See More]

Hello folks, just a little custom of the leftover colonist from the McFarlane Alien Queen Diorama. - filled up the gaps and sculpted some closed eyes, like in one of the scenes in the film -...[See More]

Made from acrylic plastic, laser engraved the details in the screen . Flooring has a built in led lights . The table is made from acrylic plastic, installed some wiring to light up the led lights...[See More]

This is one of my fave new display dioramas. It could work for many figure lines. Base is construction foam, sand, and leaf litter. Skeleton figure is a decoration from Michael's. Wall is made from...[See More]

Hello! I present the last diorama do with this design (at least for a while!) We must continue to explore designs! As above was used a base of Styrofoam, I will apply a foam plate to the floor and...[See More]

Hey everyone this is my first post so please be kind ;) Comments are welcome! I used a basic snow trooper action figure from a star wars 3 pack with to other bounty hunters and I basically weathered...[See More]

Head,hands and mask - Casey Jones 2003, upper body - guitar hero, lower body - Sandman (Spiderman 3)...[See More]

Developed in solidworks for 3.75" ultron figure, this comission was based on the sideshow model. 3d printed, sanded and smoothed with acetone and painted. The zemo figure is there only for scale....[See More]

Build over a mdf piece with styrofoam as the sculpted material for the crater, sidewalk, and walls. Street texture was made using thin gravel and glue. The remaining accesories were made in...[See More]

I made this junkyard with no real direction in mind. I thought maybe GI Joe's, but they are still too big for this setup. My next thought was Walking Dead building sets minfigures would be a nice fit...[See More]

my first dio pink foam paint and some love. went with pre made plastic sheets for brick walls acrylic paint pretty much got it done in about 3 days maybe 8 hours of work time...[See More]

For this set, I used two figures: - Hannibal Lecter in Holding Cell (NECA) for the head and the shoes - Bishop (NECA) for the body I remodeled holding prisoner from Bishop's and made a more...[See More]

This is a multi purpose display I made to show figures and staging. I constructed it from Owens Corning foam board. I then draw most of the detail work in ballpoint pen. The cobblestone, brick work,...[See More]

C-3PO: I painted the whole figure with golden spray and brush up the right leg with silver paint. R2-D2: I cast the blue sides (with epoxy) and repainted the picture with brush. I made the basis of...[See More]

100% Styrofoam, 24 inch 3 variant size styrofoam ball Paper clay It stand on 24 inch size tower over my SDCC galactus and almost about the size of my custom eternity....[See More]

Vault of Armor from War Machine War Machines vault never made it to the big screen so it came directly from my imagination. Took the Hellicarrier vault for Iron Man for inspiration. Hope you guys...[See More]