Took 12th doctor figure added chest from an old mara jade figure, painted it black. Changed hands to some I had as spares. Change boots to some roc scarlett. Finally head is one from maurauder...[See More]

this is a custom figure of the war master from big finish. I used a professor yana figure ordered from amazon for about 5,99 p, then I used citadel green stuff to make his beard. also painted him...[See More]

I took a WWE figure and removed the head, and used tin foil and epoxy putty to sculpt the new head. I used the putty to sculpt the armours, the tubes and the skin. The back shell and robe was made...[See More]

I cut the top of the head from the Seventh Doctor that came in the Eleven Doctors set, and smooth it out with epoxy putty, I then removed the hat from another Seventh Doctor figure, and glue it to...[See More]

This is a custom I was asked to make of Eric Roberts as ‘the Master’ from the 1996 Doctor Who movie. To make him I used the head from an Auton figure, the body from a Captain Jack figure & the...[See More]

I swapped the heads of the Cutter and Novice Hame figures, and repainted and added milliput sculpting to match their outfits. With The Master, I sanded away the hair, and used milliput to round out...[See More]

Twelfth Doctor body, Primeval character head, swap out hands for a more feminine set, repainted hair, etc. viola!...[See More]

Give the Doctor a Fender Stratocaster! You could sculpt one or carve one, maybe. Or, raid your granddaughter’s dollhouse!...[See More]

This is a custom figure of a Vervoid, the monster plant from the 6th Doctor story " Terror of the Vervoids " part of Trial of a Timelord. A lot of sculpting and cutting then hand painted....[See More]

Repaint of a standard dalek, the ultimate bounty hunter meets the ultimate villian. STAR WARS fanart for the Dr who fan....[See More]

This is a custom figure I was asked to make of Ian Reddington’s incartonation of the Doctor Who character ‘Nobody No-One’. Nobody No-One is a character in the Big Finish Productions audio plays...[See More]

Custom sculpted, using some solid shapes to create base shapes. Arms are loose so can be put into different poses, also allows them to be stored in closed position....[See More]

To make this Jenny figure I used the top half of an Abby Primevil figure & the legs from a Sarah Jane smith figure, I sculpted her hair & belt & repainted the figure using humbrol enamel paints....[See More]

To Make this Jackie figure I used a martha Jones figure as a base. I sliced off her face with a sharp craft knife & replaced it with one from an Abby Primevil figure.U then sculpted the front section...[See More]

An improved Twelth doctor action figure. I first added some red PVC tape to the inside of his knackered and then I later swapped the earlier 12th doctor head sculpt over, I think this came out pretty...[See More]

Well, today is the 11th anniversary of the 9th Doctor's debut, so I figured I'd go ahead and showcase this custom to celebrate! I cut the coat down a little, snipped off the color from the shirt,...[See More]

Basically, this is the 12th Doctor mod that everybody has done(I.E. Swapping the head and painting the jacket interior red), but I also painted the tip of the screwdriver and put a ring on his...[See More]

The Fourth Doctor: The head sculpt is from Warrior Gates Production. His outfit-shirt, tie, vest, pants, socks, and scarf (tassels still need to be added-oops!) are all hand-made by me. His wing-tip...[See More]

I basically had this odd mixed figure after I made my custom 9th and 12th Doctors. 12 regenerated body and standard 12 head. He didn't really have a place on my shelf until I saw the UDWF1 short,...[See More]

This guy is made from a bunch of figures. Magnus Greel's arms (repainted), The Narrator's cape (repainted), Ainley Master head, Delgado Master body. The design on the cape is the actual design from...[See More]

Pretty much a basic repaint. I took the extra shirt from the set and sanded off the pocket watch. I repainted the vest. I cut and repainted the jacket. I repainted the shoes. Put it all together and...[See More]

The Curator was played by Tom Baker, the 4th Doctor in the 50th anniversary special "Day of the Doctor". I used one of my spare 4th Doctor heads and used milliput to sculpt the face to age it and...[See More]

I started with the Clara figure from "The Impossible Set". I removed the head and sneakers and cut off the bottom part of the dress. I used milliput to sculpt the collar and center piece of the...[See More]

This is a project that has been on my desk for a while. I've broken a couple along the way but I've finally done it! This sonic does away with the buttons and switches that make this look like a...[See More]

This is a basic repaint of the body and shoes of the Fourth Doctor (Tom Baker), from the Eleven Doctors Set, with the head of the Fourth Doctor from the Pyramid of Mars set by Character Options. This...[See More]

This is a custom figure based on the 'Rills', an alien race encountered by the Doctor and his two companions Vicki and Steven in a 1960s classic adventure (one of many lost and incomplete serials)...[See More]

I have recently started on a new custom figure of a very famous Dr Who adversaries 'The Trods' that appeared in the 1960s TV Comic, though not on TV. The custom is in it's very early stages of...[See More]

Sculpted from a resin, size to match the 5" Doctor Who Character Options (CO) Action Figure range. This model depicts the character as it appeared in the classic 'Monster of Peladon' the Doctor's...[See More]

Scratch built customs of the original Dalek and the Golden Emperor from the 1960s 'The Daleks' comic strip from TV21. The Dalek is a completely scratch built figure and the 'Emporer' is a cutdown...[See More]

This is a scratch built action figure of a Zarbi from the classic 'Web Planet'. The model is based on the Character Options range of Doctor Who action figures (5" Range). The other custom figures...[See More]