The figure was made from the upper torso of the Luke cage figure (with the waste rotation attached) with the grooves dremeled down. I cut the hips of a dc superheros Batman and glued the hips to the rotating part of lukes waist so he could turn. I used lukes upper legs and attached the lower legs of a xmen classic ninja wolvie. I used the lower arms of the dc superheros batman, the neck and shoulder cowl of zipline bats,the actual neck is dc superheros batman, the fist is from luke, the left hand is from the same ninja wolvie and the belt was from dc superheros bats.I cut dc superheros supes head in half from below the nose and cut dc superheros batmans head in half from below the nose and glued them together to make his head. The cowl was made by spraying a hush batman head with plastic dip at about 12 inches away about 3 or 4 coats, allowing to dry overnight. I then sculpted the ears, nose and brow with apoxie (cause the plastic dip rounds points out) and sprayed one last nice coat. I sculpted the boots out of apoxie and painted with testors model master ghost gray,washed, then buffed with dry towel. The cape is pleather cut with ironed edges.